Autel APB130 Adapter is mainly used to work with Autel XP400 Pro and IM508/IM608 series key programmer to read IMMO data on VAG MQB NEC35XX dashboard with chip D703532, D70F3525, D70F3526, D70F3537, D70F3529. How to connect APB130 Adapter and the chip D7035XX? Check the details below.
Main steps:
Step 1:
Prepare the APB130 Adapter.
Step 2:
Connect the XP400 PRO Programmer to the 12V DC Power Adapter.
Step 3:
Carefully check the current component circuit board and find the corresponding circuit board.
Step 4:
- For chip D70F3525, D70F3526 and D70F3529 dashboard, please find position T1 and perform pin lifting (After the pin is lifted, the FVDD line needs to be connected to the lifted pin), or find position T2 where line cutting is needed and perform line cutting.
- For chip D70F3532 dashboard, please find position T3 and perform short- circuiting.
- For chip D70F3537 dashboard, please find position T2 where line cutting is needed and perform line cutting.
Step 5:
Connect the programmer and the APB130 adapter correctly and read the data.
Connection diagrams:
For MQB NEC35XX chip D70F3525 dashboard
For MQB NEC35XX chip D70F3526 dashboard
For MQB NEC35XX chip D70F3529 dashboard
For chip MQB NEC35XX D70F3532 dashboard
For chip MQB NEC35XX D70F3537 dashboard
How to read VW MQB NEC35XX Locked IMMO Data by Autel IM508/Autel IM608?
No comments:
Post a Comment