How to do EGR off of Zafira 2.2 dti with MPPS V18

Need to do EGR off of Zafira 2.2 dti, I read it with MPPS v18, but I can't write any file I have changed. Mpps can't do it and winols doesn't recognize a ECU.
https://mega.nz/#!1UoRTQAL!nbgp2BJ8zWOxSys3jDCZz-44jpbXVJL90zA5ciULfck

Answer:
I am reading it directly, my mpps works without any problem, I can read and write files to psg16 without any problem but only original ones without modifications. I need good file with correct checksum.

Finally, I have done it already with my file, and everything is ok.

For all with problems like mine:
The problem was in the security access, the first try is unsuccessful and you must not power off the ecu, a second try is with success. That was my fault, every time I was resetting a pump.

 http://blog.obdexpress.co.uk/2019/07/31/egr-off-of-zafira-2-2-dti-with-mpps-v18/

How to use JMD OBD to calibrate the odometer on Buick Excelle 2013?

Look here:Buick Excelle 2013 odometer correction with JMD OBD

Prepare:
Use a phone to download JMD APP on the official site
http://www.handy-baby.net/download.html

Have one JMD OBD

From http://www.obdexpress.co.uk/wholesale/jmd-obd-adapter-for-handy-baby2.html
Youtube video demo:


Firstly, start up the dashboard.
The old mileage is 81385 kilometer.


Insert the JMD OBD into the OBD2 port of the car.

Open the JMD APP.
Find out "OBD".


Tap "Band".
Add bind
Menu updates, download from internet.
Loading IMMO data, please wait.
Loading Match data, please wait.
Loading ODO data, please wait.
Tap ODO -> America -> Buick -> Excelle GT/XT -> IC -> Odometer Calibration.
Input a new mileage like 81384.
Writing the new mileage
Mileage calibration success.
Have new mileage 81384 on the dashboard.










Source:http://www.mileageprogrammer.com/jmd-obd-calibrates-odometer-on-buick/

Renault Can Clip V188：Free download and installtion

You can free download Can Clip V188.0.3 which is tested working with 2019 New ZOE and Captur II, after that you can refer to the Clip V188.0.3 Win7 installation guide.

Clip V188.0.3 new updates:
New ZOE and Captur II
WIN 7 8 10 works


Free download Can clip V188:
DOWNLOAD BY MEGA
https://mega.nz/#!bY0TSQYJ!I4OjHdEqbdpPQMDyYMRrW0ez3JA1oC4VSHO-s2zb5sE
DOWNLOAD FULL ACTIVATION V188
http://www.internel.es/torrent/activation_v188.zip
Security: unknown, since it is shared on MHH forum.

Look here, this is verified source:
http://www.obdexpress.co.uk/wholesale/cd-software-for-renault-can-clip.html
Can clip interface /RLT2002 clone (SP19-D & SP19-B) : Succeed
Can clip interface (SP19-A SP19-C: Failure
Nissan consult 3 (Renault Alliance VI): Failure

How to install Renault Can Clip V188.0.3 on Win7 step by step?
OS: win8 10 is working too.

Youtube video:


How to active Clip V188:
Click on "Crack Renault Clip" to active can clip.


On the desktop, click on "188_0_3_0", then "setup".

Launch Clip V188, click on "First Installation".


Accept the agreement.

Tick off " Other Countries".

Tick off the language you desire. Clip V188 language is multiple choice: English, German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romania, Swedish

Tick off "Always trust software from ...", click on "Install".


Microsoft Primary Interoperability Assemblies 2005.


After a while, the computer will prompt you to shut down automatically.


How to register Can clip V188.0.3?  
Right click on "Clip" on the desktop, choose "Properties"
Click on "Open file location", find out "RSRWin", right click and choose "Copy" and paste it on the desktop.
Click on the folder "Activation (Patch V2)", right click on "RSRWin" and choose "Copy", then paste the "RSRWin" in "Disk C-> Clip_x91->Lib->Application".
Click on "RSRWin" in "Disk C-> Clip_x91->Lib->Application", tick off "I understand and accept the license contract above", click on "Register me now", click on "No", click on "Confirm" after entering the unlocking code.
Registration succeed.
Again cut "RSRWin" on the desktop and paste it to "Disk C-> Clip_x91->Lib->Application".


Simple demo on how does Can clip V188 read DTCs for Renault Twingo Phase 2:
Open Clip.
Accept.
Click on "OK" after reading Clip V188 new features.


Input the Vehicle information.

Click on "Petrol Injection" first, clip V188.0.3 can access to also ABS, GAS INJ. Variable P.A.S.


Fault test.


It's your time to diagnose New ZOE and Captur II with Can clip V188.0.3.

Good luck.

www.obdexpress.co.uk

http://blog.obdexpress.co.uk/2019/07/26/free-download-renault-can-clip-v188-0-3/

Scania SDP3 2.40.1 free download, setup on Win7 & activation

Topic: SCANIA SDP3 2.40.1 free download source, setup on Win7 procedure, activation etc. 

1. SCANIA SDP3 2.40.1 free download source

https://share.weiyun.com/5RRyFLs
Pass: c1ev49
Security: 100% safe
Uploaded by obdexpress.co.uk engineer
Activation: send the HWID to the dealer for activation.
Tested working with VCI3 Scanner to diagnose and program Scania.
Or This test version:Scania SDP3 V2.40.1 Diagnosis & Programmer + Activation without Dongle
http://www.obdexpress.co.uk/wholesale/scania-sdp3-diagnosis-programmer-software.html

2. SCANIA SDP3 2.40.1 setup on Win7 procedure

OS: WIN7 32bit (WIN8 is okay too, try WIN10 at your own risky)
Youtube video :

Setup Adobe Reader 9.2


Setup ".Net Framework 4.6.2".


Open "SDP 3 2.40.1" to setup.


Right click on "Prerequisites" and select "Run as administrator".


Restart the computer.


Right click on "Computer" and select "Properties" to view the computer system is 32bit or 64bit.
Back to open Computer -> Local Disk(D:) -> KeyGenandFIX->X32 -> install.

SDP3 2.40.1 activation service:
Open "Hardware ID reader".
Copy "SDP3 HWID reader X86(public)", send the ID to the dealer to active.
After the dealer helps register, right click on "Registry Editor" and select "Merge", then "Yes".

Open Local Disk(D:)->KeyGenandFix -> Fix File 2.40.1.
Copy the .dat and .dll files.
Right click on "SDP3" on the desktop, then "Properties", then "Open File location", then "Paste" (Paste the above two.dat and .dll files to replace the existing ones).


Open Local Disk(D:)->KeyGenandFix.
Open "Time" and click on "Crack", then succeed.


Restart the computer.

On the desktop, open SDP3 configuration, select the language you want, SDP3 2.40.1 language is available with:
English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese etc.


Open "SDP3" on the desktop.

Read the Warning message and click on "Yes" to agree.


Continue to diagnose and program Scania with Scania SDP3 2.40.1.

Here I'd like to copy and paste the SDP3 description for reference: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.

Thanks!
http://www.obdexpress.co.uk/service/how-to-install-scania-sdp3-2.40.1.html