Which tool should BMW choose for mileage correction in 2022?

 Question: Which tool recommend to do odometer correction for BMW? YANHUA Digimaster 3 or CGDI CG Pro 9S12 programmer?

Obdexpress.co.uk suggested:

If you do more read & write BMW ECU jobs including mileage adjustment or immobilizer reset, then CGDI Pro is recommended;

If you do more odometer corrections not just simply for BMW, then Digimaster 3 is recommended.

YANHUA Digimaster III

Price: €851

Features

Odometer correction

Audio Decoding

Airbag Resetting

Engine ECU programming

Key programming for BMW & Mercedes Benz

Among them, odometer correction is the main function of Digimaster 3 and covering a wide range of car models.

Odometer Correction Car Model List

Digimaster 3 supported 2000–2014 BMW CAS.

YANHUA 35080 V6 adapter supports BMW 35080 & 160DOWQ series chip.

YANHUA CAS BDM adapter supports BMW CAS2, CAS3, until 2010 newest CAS4.

Digimaster 3 wiring diagram & instructions path:

Meter system >> Europe >> BMW >> Series(E90) >> Meter adjustment >> 35080/ 35080 V6/ D80D0WQ

(For more supported car models, please contact online service.)

CGDI CG Pro 9S12 Programmer

Price: €421

Features

Read & write BMW CAS1–4, Porsche BCM, Mercedes-Benz EIS, Audi BCM2 Etc anti-theft computer.

Support 80% of the 35160WT, 35080, 35128 on market.

Free new CAS4 DB25 & TMS370 adapters support to read CAS4 without removing chip.

CGDI 9S12 BMW Supported List:

CAS4+ 5M48H/1N35H (9S12XEP100)

CAS4 1L15Y (9S12XDP512)

CAS3 0L15Y/0M23S (9S12XDP512 including CAS3+ series）

CAS3 0L01Y (9S12DG256)

CAS2 0L01Y/2K79X (9S12DG256)

CAS2/E66 0L01Y/2K79X (9S12DG256)

CAS1 0K50E (912DT128A Write FLASH data online）

EWS4 0L86D/1L86D/2L86D (9S12DJ64)

EWS3 0D46J/2D47J (MC68HC711EA9)

EWS2 1D47J (MC68HC711EA9)

*CG Pro 9S12 is able to read & write above data for mileage correction & immobilizer reset (For more supported car models, please contact online service).

CG Pro 9S12 Calibrate Mileage for BMW 160D Steps

The mileage of original car is 101024km. Miles are stored in 160D chip.

Remove BMW meter instrument from vehicle.

Clean 160D chip, put it into CGDI adapter.

Select car model to read & save original data files: Dashboard >> BMW >> 160DQ(mode 1) >> Read >> Save

Input new mileage to start adjusting odometer: 72992km

Read again to save new data files.

Done.

For more Odometer Correction Tools, welcome to pick on our shop.