How to Add 2014 Alphard Key by Lonsdor K518 Pro and LT20-06 Remote?

 Lonsdor LT20–06 Universal Smart Key can work with Lonsdor K518 Pro to add new key to 2014 Alphard no issues.

Let’s learn about something info of LT20–06 first.

LT20–06 Universal Smart Key has two versions of 5 buttons, supports 433 / 315 MHz frequency, and currently works for the conversion between 4D and 8A keys for Toyota and Lexus.

LT20 Series Boards List:

BoardP1/P4Frequency (MHz)ModulationPackButtons120 (5 buttons)P4 [A1 00 A9 A9]314.35/315.10; 312.35/314.10 FSKBubble packLock, unlock, trunk, left door, right door5380 (5 buttons)P1 [ 94 ]312.00; 314.35; 315.12; 433.92 ASKBubble packLock, unlock, trunk, left door, right door

Vehicle Models Supported:

2015–2021 Toyota Camry

2015–2019 Toyota Corolla

2019–2019 Toyota C-HR

2015–2021 Toyota RAV4

2016–2021 Toyota Land Cruiser

2015–2021 Toyota Highlander (PIN required for 2021)

Alphard, Werefard

Functions Supported:

LT20–06 smart key is compatible with K518 Pro/K518 series key programmer and KH100+ to perform the functions below.

• Get version information
• Read button function
• Convert button function
• Unlock key
• Upgrade key
• Modify frequency
• Copy smart key (8A)
• Convert smart key type
• Modify remote count value
• Generate emergency key (Lonsdor KH100+ doesn’t support it)

Quick guide to add key with K518 Pro and LT20–06:

Step 1: Generate remote

1.Set WiFi well to K518 Pro key programmer

2.Select Special Functions>> Key Settings>> LT Smart Key

3.Upgrade the key to the latest version

4.Select [Convert smart key type]

5.Place the Lonsdor LT20 key into the coil of K518 Pro device

6.Choose By selecting key type>> Generate 4A>> board type (i.e. 5380)>> frequency (ASK 315.22 MHz)>> 5 buttons option

7.Generate key successfully

Step 2: Add new key

Tap Toyota>> select from the type>> Passive entry and start>> Type 3>> Add smart key

Make sure the smart key has full power

Use the original key to light the dashboard, and close to the Start button

Then put Lonsdor LT20–06 smart remote close to the Start button

The buzzers heard twice, add new key successfully

Finally, test the remote function of new key, works fine!

www.obdexpress.co.uk

Lonsdor LT20 Universal Smart Key for Toyota/ Lexus/ Subaru

 Lonsdor LT20 series universal smart key is divided into 9 key types for Toyota/Lexus/Subaru add key & all keys lost programming. This can be easy done with the K518 key programmer(Lonsdor K518S, K518ISE, K518 PRO, KW100).

By Chip Types

8A(P4=3100B8B8)4D(P1=F1)

8A(P4=0000BABA)4D(P1=D4)

8A(P4=00003939)4D(P1=34)

8A(P4=00008888)4D(P1=78)

8A(P4=0000A8A8)4D(P1=94)

8A(P4=0000A9A9)4D(P1=98)

8A(P4=9100A9A9)4D(P1=9F)

8A(P4=9100AAAA)

8A(P4=9100F3F3)

By Frequencies

Dual (MHz)

312.09/314.35314.35/315.10

312.09/313.09315.10/314.00

312.50/314.00315.10/314.35

313.09/312.09433.58/434.30

314.00/312.50433.58/434.42

314.00/315.10434.30/433.58

314.35/312.09434.42/433.58

Single(MHz)

312.15

433.92

314.01

433.93

314.35

314.358

315.12

315.128

315.15

By Board Numbers

8A

0010004001820410211033303950001101010350044021503410F43002001200351202022303450610002503041P7000

4D

00310140F433S07513370S529053806221S721079900091031005000780461053005691623079300111A4330751S078052905360S580166017980

By Vehicles

LT20–01

Lexus IS300C(2009-)

Lexus ES240(2010–2012)

Lexus IS300(2008–2010)

Lexus ES250(2008-)

Lexus RX.350(2011–2015)

Lexus ES350(2006–2012)

Lexus GX460(2010–2013)

Toyota Camry(2006–2011)

Lexus RX270(2009–2015)

Toyota Prius(2010–2015)

Lexus RX450(2009-)

Toyota Land Cruiser(2008–2015)

Lexus RX450H(2015-)

Toyota Prado(2006–2013)

Lexus CT200(2012–2015)

Toyota Crown(2009–2014)

Lexus CT200H(2012-)

Toyota Highlander(2008–2014)

Lexus GS430(2006-)

Toyota Reiz(2010–2011)

Lexus GS300(2008-)

LT20–02

Subaru ST1(2019–2021)

Subaru WRX(2019–2020)

Subaru Legacy(2018–2021)

Subaru Outback(2018–2021)

Subaru Ascent(2019–2021)

Subaru Crosstrek(2018–2021)

Subaru Forester (2019–2021)

Subaru Impreza (2017–2021)

LT20–03

Toyota Previa(2007–2014)

Toyota Alphard(2006–2015)

Toyota Vellfire(2009–2014)

LT20–04

Toyota Prado(2014–2017)

Toyota Innova(2016-)

Toyota Crown(2012–2019)

Toyota Reiz(2012–2014)

Toyota Land Cruiser(2013-)

Toyota RAV4(2013–2018)

Toyota Highlander(2013–2021)

Toyota Levin(2016–2018)

Toyota Prado(2013–2021)

Toyota Camry(2012–2016)

Toyota Yaris L(2015–2022)

Toyota Corolla(2014–2018)

Toyota Vios(2016-)

Toyota Fortuner(2016-)

Toyota Vios FS(2017-)

Toyota Hilux(2015–2020)

LT20–05

Toyota Sienna(2010–2019)

LT20–06

Toyota Previa(2012–2022)

Toyota Alphard(2012–2021)

Toyota Vellfire(2015–2021)

LT20–07

Lexus ES(2018–2024)

Lexus UX(2019-)

Lexus LS500H(2017)

Lexus LS500(2019)

Lexus LC (2018-)

LT20–08

Toyota Camry(2018–2019)

Toyota CHR(2022)

Toyota lzoa(2018–22)

Toyota RAV4(2020–2022)

Toyota Wildlander(2018–2022)

Toyota Avalon(2018–2022)

LT20–10

Toyota Tundra(2021-)

Toyota Crown(2023-)

Toyota Sienna(2020-)

Toyota Alphard(2022-)

Toyota Harrier(2020-)

Toyota Vellfire(2022-)

Toyota Land Cruiser(2021-)

Toyota Sequoia(2023-)

Toyota Venza(2022-)

Lexus LX600(2023-)

Contact us to select the board as you like!

Email: sales@OBDexpress.co.uk
Skype: obd2express.co.uk
WhatsApp: +44 7418609676
WeChat:15705931767

www.obdexpress.co.uk

OBDSTAR MT502 Test Land Rover KNOB Gear Lever Action

 How to do a Land Rover KNOB Gear Lever action test with OBDSTAR MT502?

Check the step-by-step guide below.

Preparation:

OBDSTAR P004 Adapter and ECU Clone Jumper

OBDSTAR MT502 Test Platform Tool

Main cable

12V power supply

Land Rover Gear Lever Control ECU

Operation guide:

Connect a 12V power supply to MT502

Select Test Platform>> Accept the disclaimer>> GEARLEVER>> GEAR LEVER V30.15>> GEAR LEVER Land Rover/JAGUAR

Follow the Pinout diagram to connect MT502 Test Platform and Land Rover Gear Lever Control ECU by P004 ECU Clone Jumper and Adapter correctly

ECUToolA-Pin 112V(16)A-Pin 212V (Control power)A-Pin 1012V(16)A-Pin 12GND(4+5)A-Pin 6CAN L(14)A-Pin 5CAN H(6)

After connection, turn on the ignition switch button of P004 Adapter

Click “Start” to test

Plug in the control power supply

Test that the lift up, and knob functions work properly

Unplug in the control power supply

The lift down function works properly

Learn more info about OBDSTAR MT502 Automotive Compressor Test Platform Tool:

https://www.obdexpress.co.uk/wholesale/obdstar-mt502-test-platform-tool.html

OBDSTAR DC706 Clone Renault EMS3120 ECM by Boot

 Question:

Is it possible to clone Renault Continental EMS3120 TC1738 ECM by OBDSTAR DC706?

Obdexpress.co.uk engineer replied:

Yes. DC706 with ECM V30.60 can read the original EMS3120 ECM INT Flash and INT EEPROM data, and write into the new one in boot mode.

Here are the newest Renault ECM models supported by OBDSTAR DC706 ECU Tool.

 

Step 2:

Select ECU Flasher>> All>> ECM>> ECMV30.60>> ems3120> Renault Continental EMS3120 TC1738

Step 3:

Check the Boot and PINOUT connection diagrams

Step 4:

Follow the diagrams to connect BOOT, MP001 Programmer, and EMS3120 ECM by P004 ECU Clone Jumper, C401 and W004 properly

Then connect MP001 to DC706 by main cable, and supply power to DC706

Step 5:

After connection, click "Start", select "BOOT" and "MP001" options

Step 6:

Connect OBDSTAR DC706 to an available WiFi

Connect to the ECU

Once the ECU connection is successful, you can start to perform the corresponding read and write operations

Click "Read INT flash (TC1738)" and "Read INT eeprom (TC1738)" to read the original data in sequence, and then back up the related file

Connect DC706 ECU Programmer to a new EMS3120 ECM

Click "Write INT flash (TC1738)" and select the original data to write into the new ECM

Click "Write INT eeprom (TC1738)" and select the original data to write into the new ECM as well

Disconnect ECU after writing.

Done!

www.obdexpress.co.uk

Yanhua ACDP2 Clone BMW N46 MEV1721 by Bench No Issues

 Yanhua Mini ACDP 2 Feedback:

Read and write BMW N46 MEV1721 DME on bench without any issue.

No need to open DME shell, no need to drill hole on DME, no need to plug wire.

Identify the original DME chip info and save the data- OK

Full back up the original ECU data- OK

Full write data to the new N46 DME- OK

Tips to clone N46 MEV1721 DME with ACDP2 successfully:

Tip 1.Tools required

• Mini ACDP2 Key Programmer
• 20 Pin cable
• Yanhua ACDP BMW-DME-Adapter X8 Bench Interface Board
• A51C BMW ECU Clone Software License

Tip 2.Connect Yanhua ACDP-2 and N46 DME properly

There is the related connection instruction in the ACDP-II software.

Step 1. Please prepare ACDP-2, 20Pin cable, X8 interface board and DME.

Step 2. Connect the interface board correctly to the DME interface as shown.

Step 3. Short the jumper cap to the "CAN-R" port according to the marked position.

Step 4. Connect ACDP, 20Pin cable, interface board and DME.

Step 5.Use the ACDP standard power adapter (voltage +12V, current> = 2.5A) to connect ACDP 2 programmer

Note:

1.Please connect Yanhua ACDP2 with DME properly;

2.Please don't cut the power nor pull out the device during the operation.

Tip 3.Bind ACDP2 device to ACDP software on smartphone/tablet/PC, and connect to an available WiFi

Tip 4.Operate with correct menu path

BMW>> ECU Clone>> BOSCH DME>> Exx>> N45 (ME1721) or N46 (MEV1721)>> Identify>> Full Backup Data>> Full Write Data

Tip 5. Follow the on-screen prompts to operate one by one

Note:

Yanhua Mini ACDP-2 and ACDP X8 Interface Board with A51C ECU Clone License also can clone BMW E chassis N45 (ME1721) DME on bench successfully.

www.obdexpress.co.uk

OBDSTAR X300 DP Plus Program 2022 KIA K5 All Smart Key Lost

 OBDSTAR X300 DP Plus is able to program 2022 KIA K5 all smart keys lost by OBD successfully. You can use the scanner to read pincode free, no need to purchase. The ungraded version X300 Classic G3 can also supported. Following let's do it.

CAR IMMO >> HYUNDAI KIA GENESIS >> Latest version >> Manual select model >> KIA >> EUROPE >> K5(DL3) >> 2020–2021 >> PROXIMITY >> Program smart keys

This function is available by connecting the server, please ensure the Internet connection is normal.

After this function is executed, all keys will be erased and re-programmed to use.

If you need to perform this function, please have all the keys ready.

Turn off the ignition, then open and close the driver's door once.

Please input the PinCode: 667094

Press the "Enter" button, then within 5s, use the top of the proximity key(the end with the indicator) to keep pressing the start/stop button for 5s, the immobiliser light will flash.

(If the operation fails according to the prompt, please remove the key housing and perform this function again.)

Program success.

Check the new key, lock & unlock work, it can start the car.

This is how to program 2022 KIA K5 all key lost with X300 Key Master DP Plus successfully.

www.obdexpress.co.uk