Lonsdor K518 Pro Adds 2020 Mazda 6 Smart Key by OBD

 This is 2020 Mazda 6, I'm going to make a spare key with Lonsdor K518 Pro Key Programmer for this car. So let's see how to do it.

Connect Lonsdor K518 Pro with OBD.

Immo & Remote >> MAZDA >> Australia >> M6 >> With smart >> 2017- >> Add smart key

Switch ignition on.

Current key count: 2

Is ignition on? OK

K518 Pro is configuring system, please wait about 7 minutes, then the horn will ring…

Hold the logo end of the smart key closer to Start button.

For AT, step down the brake; for MT, step down the clutch.

Within 10s put the smart key's logo side close to car start button…

Current key count: 3

Program completed.

Press "OK" to program more keys, otherwise press "Cancel" to complete.

Before start car engine, you will need to complete below operation steps:

For AT vehicles

Slam on the brake.

In turn to put each programmed key onto car start button to start engine for 3s, then turn ignition OFF.

Programming complete.

Check the new key, it's working.

Done.

www.obdexpress.co.uk