How to Clone Audi 6HP TCU by Yanhua ACDP 2 and Module 32?

 Question:

Is it possible to use Yanhua Mini ACDP2 to clone Audi 6HP TCU?

Here is the answer:

Yes, Yanhua ACDP Module 32 is required to work with ACDP-2.

Besides 6HP Bosch TCU, it also supports MPC56X chip DME clone, incl.ME9.0/ MED9.1/ MED9.5/ MED9.5.10/ EDC16C2/ EDC16C8/ EDC16CP31/ EDC16CP35 DME etc.

http://blog.obdexpress.co.uk/2024/01/30/yanhua-mini-acdp-module-32-k-line-module-clone-diagram/

How to do:

Power on ACDP

Open Mini ACDP App, check if device is connected

Select Module>> K-Line module clone>> 6HP BOSCH (VAG)

Click [Help] icon on the right side to check the accessories required and connection method

Follow it to connect ACDP 2, Yanhua Module 32 and 6HP gearbox correctly

Then perform the functions below one by one.

Step 1: Identify

Step 2: Full backup data

Step 3: Full write data

Use the ACDP standard power adapter (voltage +12V, current>= 2.5A), and ensure the stable network connection and DO NOT pull out the device during it working.

Step 1: Identify

Confirm the system info and save a screenshot

Identify chip info finish

Step 2: Full Backup Data

Read chip data, and save the data file after reading

Backup data success

Step 3: Full write data

Connect Mini ACDP 2 to a new Audi 6HP gearbox TCU

Confirm the system info and save a screenshot

Select the original chip data and write into the new TCU

Don't cut the power nor pull out the device during the programming

Write chip data successfully

Done!

www.obdexpress.co.uk