GM 6T/ 6L Gearbox Clone with Yanhua Mini ACDP + Module 22

 This is a tutorial on how to use Yanhua Mini ACDP + Module 22 to clone GM 6T/6L gearbox. Supports to clone GM gearbox: 6T30/6T35/6T40/6T45/6T50, 6T70/6T75/6T80, 6L45/6L50/6L80/6L90.

Mini ACDP Clone GM 6L50 Gearbox

Note: users can click "Help" for connection diagram.

Tools

GM 6L50 gearbox module

20PIN cable

OBP+ICP adapter

ACDP Host

6LXX interface board

Installation

Install the interface board to gearbox.

Short the jumper cap on the OBP+ICP adapter to the CAN-R JOIN side.

Connect all together.

Operation

Mini ACDP >> GM >> Gearbox clone >> 6L50 >> Full backup data >> Continue

Confirm & save info, click "Continue".

Save data file.

Connect to new GM 6L50 gearbox, prepare to write the the original data.

Full write data >> Continue

Confirm & save info, click "Continue".

Load data file to write.

Make sure 2 gearbox models are the same.

Click "Continue".

Writing chip data finished.

Mini ACDP Clone GM 6T40 Gearbox

Note: users can click "Help" for connection diagram.

Tools

GM 6T40 gearbox module

20PIN cable

OBP+ICP adapter

ACDP Host

6TXX interface board

Installation

Connect the interface board to gearbox.

Short circuit the CAN resistor on the OBD+ICP adapter to the "CAN-R Join".

Connect all together.

Operation

Mini ACDP >> GM >> Gearbox clone >> 6T40 >> Full backup data >> Continue

Confirm info, click "Continue".

Save data file.

Connect new GT6T40 gearbox to ACDP Key Master.

Full write data >> Continue

Confirm info, click "Continue".

Load data file to write.

Make sure 2 gearbox models are the same.

Click "Continue".

Writing chip data finished.

This is how to perform GM gearbox clone with Mini ACDP Key Master.

www.obdexpress.co.uk