Solved: Yanhua Mini ACDP 2 Fails to Connect PC via USB Cable

 Problem: After connecting YanhuaMini ACDP 2 to computer and open PC-ACDP2 software for seconds, the device is still not connected. Entering "Setting >> PC bound to ACDP-II device", but the device list is still without any information.

This problem can be solved by modifying the device IP. Below we provide a solution to help fix the issue.

Solution

Move the mouse to the Network icon in the lower right corner of computer.

Right click "Network icon -> Open Network & Internet settings -> Change adapter options".

If you don't know which Network is Mini ACDP 2, try to unplug and plug the USB cable of device once. You'll know for sure when inserting it.

Right click "ACDP 2 Network -> Properties -> Internet TCP/IPv4 -> Use the following IP address:

IP address: 192.168.88.88

Subnet mask: 255.255.255.0

Default gateway: 192.168.88.1

Use the following DNS server addresses:

Preferred DNS server: 192.168.88.1

Enter device IP address and DNS, click OK.

Wait for a few seconds before the device automatically connects.

Successfully connected!

The problem was solved.

www.obdexpress.co.uk