GODIAG ECU GPT Boot Adapter is designed to read and write ECU
data without disassembling the ECU by OBD2 bench, GTP bench or boot method. It's
coming with a short-circuit-proof boot resistance board to protect ECU.
Customers can use existing J2534 devices with PCMFlash software directly.
Features
Support GPT method to read & write ECU data without disassembling.
Support BOOT method to read & write ECU data.
Support read & write ECU data by OBD2.
BOOT resistance board and connection cable have insulation protection of
high temperature and environmental protection silicone wire.
Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
Support PCMFlash automatic control ignition power supply.
Support manual ignition power control.
Free switching with CANbus 120Ω
Equipped with ECU dedicated connection terminal.
The ECU port cable is labeled.
Compatibility
Diagnosis support standard OBD2 protocol.
Support to read and write ECU data with J2534 device.
Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals.
Necessary to work with Module 71.
Support other devices like Scanmatik, OpenPort 2.0, Mongoose JLR,
MongoosePro JLR, Teradyne GNA600(VCM 1), Mazda VCM2… to read and write ECU data
by OBD2 or BOOT 53 mode.
Comparison
Connection
ME17.5 ME17.5.6 Connection Diagram
SIMOS 8.10 [TC1796 INT.F.] — Audi Connection Diagram
Why to buy GODIAG ECU Adapter?
The fixed resistance board can be used for longtime.
Equipped with 15cm silicone wire for extending.
The fixed resistance can prevent from losing.
The resistance board is separated to support multiple-series
connection.
Except for ECU, it also supports to read and write immo, airbag…module for
diagnosing, matching, programming or coding by OBD2.
Easy to plug, save time and effort.
Compatible with most available J2534 devices.
The adapter has already done the standard OBD2 pwm+ pwm- CAN+ CAN- 120Ω
K-line communication protocol.
www.obdexpress.co.uk
No comments:
Post a Comment