OBDSTAR DC706 Repair 2016 Honda Civic Idle Speed by Bench

 It has been confirmed that OBDSTAR DC706 can repair HONDA Civic KEIHIN PGM FITC1782 idle speed successfully.

Maintenance Background:

A 2016 Honda Civic with a 1.5T engine exhibits idle shaking when in D gear. The dashboard shows that the engine speed is about 600–650 rpm. Using a diagnostic tool shows no fault codes for the vehicle, and hardware inspection also reveals no abnormalities. Cleaning the throttle still doesn’t solve the problem.

Solution:

The issue can be perfectly resolved by using the DC706, with its one-click repair function for the 10th generation Civic’s low idle problem.

Tools used:

• OBDSTAR DC706 main unit
• Main cable
• High power stabilized power supply
• OBDSTAR ECU Bench Jumper
• MP001 multifunctional programmer
• HONDA KEIHIN PGM FITC1782

Requirement:

• Make sure the ECM software is updated to V31.42 or above.
• Enable a stable internet connection during the operation.

Operation guide:

Navigate to ECU Flasher > ECM > ECM V31.42.

Search the ECM model-HONDA KEIHIN PGM FITC1782

Click on [Guide] to view detailed connection methods and operation instructions.

Click "Start" and select "BENCH" and "MP001"

Check the pinout connection

ECUTOOLA-Pin 712V (16)A-Pin 13GND (4+5)B-Pin 3012V (16)B-Pin 22GND (4+5)A-Pin 36CAN L (14)A-Pin 37CAN H (6)

Connect MP001 Programmer to the Honda ECM using the Bench Jumper as per the diagram

Connect OBDSTAR MP001 Programmer and DC706 ECU Tool via the main cable

Connect the power supply to the main cable

After establishing the connection, click [Start] select Bench mode, and choose the MP001 adapter.

Start the connect ECU, read and write INT flash (TC1782)

When writing INT flash, it needs to verify the data.

Finally, repair the idle speed, adjust the idle speed to around 800 RPM

All are OK!

www.obdexpress.co.uk