Xhorse VVDI Key Tool Plus Adds Mercedes W207 BE Key

 It's pretty easy to add a Mercedes Benz W207 BE key with Xhorse VVDI Key Tool Plus Pad. Having disassembled EIS module from car, and prepared a working key. Let's go ahead.

Connect VVDI Key Tool Plus to EIS module.

Switch ignition on with working key.

Immo programming >> Europe >> Benz >> Select from system >> EIS tool >> Start programming >> Read the lock(EIS) data >> OBD

Save data file.

Select from system >> Prepare key file >> Start programming >> Prepare key file >> Load data file >> Input key password >> v051 >> Save key file

Key file generation completed.

Select from system >> Read write key >> Read/write key via IR >> Start programming

Insert the new MB BE Key into infrared antenna of Key Tool Plus Pad.

Write BE key >> Load key file >> OK

Wiring data success.

If key is smart key(BE), please install battery and wait 1 minute before learn key to car!

(The key LCD will flash during this time!)

The activatation key generally directly inserted into the car to activate, if you cannot activate, please try the following methods:

Manual activation by: select from system >> read write key >> read/write key via IR >> activate

Read EIS data again and generate key file again.

Try to unplug the OBD connector, insert the BE key into EIS to activate.

Completed.

www.xhorsestore.co.uk