Yanhua Digimaster 3 MEM ICP Solderless Adapter User Guide

 YANHUA Digimaster 3 MEM ICP solderless programming adapter is used to read & write 8PIN EEPROM data without disassembly or soldering. Fast and easy, coming with Digimaster 3 package.

Tool Required

MEM-ICP adapter

3M fixed piece

Solder-free programming adapter

14PIN cable

Digimaster 3

Installation

Confirm the location of the standard 8-pin eeprom chip & crystal, fix 3M piece according to the crystal position & adapter length.

When the crystal pin spacing is greater than 5mm, install the welding free programming adapter to A column. The white one is a removable probe that can be used to short the crystal in different packages. In this case, I'm gonna adjusted it to 12.

Connect the 14PIN cable & 8-pin chip clip, install solder-free programming adapter. Adjust the angle, short the crystal. Please note that the red line means PIN-I.

Clamp the 8-pin chip, connect the MEM-ICP adapter with 14PIN cable, connect the adapter to Digimaster 3.

Operation

Save Original Data

Select car & chip model: Instrument system >> Japan & Korea >> Subaru >> Outback >> 2006 >> 93C56 >> Next >> MEM-ICP

* Users can drop down the help image to guide the connection.

As you can see, green indicates that the 8-pin chip and the crystal are well connected.

Click "OK".

Confirm the current mileage, click "OK".

Save the original file.

Mileage Correction

Enter the mileage you want to modify, click "OK".

Write data successfully.

That's it!

www.obdexpress.co.uk