Wednesday 18 July 2018

MPPS V21 = Failure, MPPS V18 = Success

This is for those looking for a cheap MPPS V21 cable from China.
FYI, you are NOT advised to have MPPS V21 China clone!

If you have MPPS V21 clone, your interface might be locked.
Look here: MPPS V21 = Failure

V21 Was released AS A TIME BOMB for clones LOL.
Any V21 software will kill any clone after 10 writes. 

Dead interface. CAUTION DO NOT USE V21 on v18

100% Interface Danger, Dead usb.
I used v18 for several months, lots of cars.
V21 killed interface.


my mpps v21 arrived only worked few day now locked
PC not detect anymore

It has the same kind of timebomb built in. If you need v21 you need to reflash it, end of story. Also people don't buy mpps to make boot mode for every write, if that's what your intentions are that's just foolish.

Please buy a MPPS V18 interface instead, if you need a MPPS cable.
MPPS-V18-NO-LOCKED-ISSUES

Look at MPPS V18 reviews: Have MPPS V18 = Have relief.

MPPS V18 clone Ford:
Ford Fusion Style 1.6 TDCi Bosch EDC16C34-2
Software Number 1 : 1037377399
Software Number 2 : 1037377399
Ford Hawdware Number : 9653239880
Ford Software Number : 5255A56D10
Ecu Type : BOSCH EDC16C34/2.2
R/W OBD/CAN = OK .... after write not error OBD scaner.


Ford – SID206 R/W OBD ok

Ford edc16c34 2.20 r/w ok
yesterday i have tested mpps v18 into myFord Focus 2 edc16c34.
read about 10 min and write 3-4 min


Focus, read 3 sectors about 10 min and write 4,20 min than wait 3 min.
after that 3 min i wait another 2 min, like software says.


MPPS is renown for Issues on the Focus 1.6tdci Edc16 ecu,
so much so i never ever tried, always same story mpps.
Always used Fgtech on these, and no issues,

i would BDM or use any tool other than MPPS whatever version

i come back with news about edc16c34 Ford
the news is this is a good tool.
mpps did not corrupt my eep, file that i was made it was bad, in my happines and stupidity i put into IQ maps, 65mg fuel without changing IQ limit, 60mg
i have write that file with galletto and same problem.
today i have write another file (good one) with mpps v18 and it was verry good.
ford edc16c34 2.20 r/w ok
i can’t wait to see if can do edc16c34 5.95

MPPS V18 VAG (audi, vw, skoda, seat):
Ecu Selection = Volkswagen Passat 2.0 TDI Siemens PPD 1.X 
Bosch Hardware Number: 03G906018CD
Vw Software Number: 03G906018CD
System Type Number: R4 2.0l PPD1.5 G
R/W OBD/CAN = OK


VW PCR 2.1 work v18 clone no problem
read and write on bench

Golf 1.6 TDI Siemens Simos Pcr2.1
R/W can (unlock boot mode-ok) – ok

easy A4 2.5L edc15v
obd mode
read and write
kess didnt want to read this tho ? might of been voltage l read at the guys place(fans on with read and write) and wrote at mine with charger but didnt try kess again


Golf TDI EDC17c14
Boot mode.
read / write all ok,


Skoda Fabia 1.9SDI EDC15V+ ….
generic eeprom OBD K-line R/W-OK
Flash OBD K-line R/W-OK


Skoda Octavia 2.0 Tdi edc16
all good

Vw Caravelle 1998 msa 15.5
same I’d okay but not read

ECU EDC17 on Audi a6 2009
this tool read via boot

Polo SIMOS 3PE 1.2 12v
read/write as generic simens SIM4LE boot mode flash 512kB – OK  (catalyst off).

Chinese MPPS V18 Opel:
Opel cdti 1.7 ecu Denso R/W ok

Opel – EDC16C9/39PSG16 via CAN OBD read and write ok

Opel – EDC16C9/39,PSG16CAN read write OK

Opel Corsa marelli 1.3cdti OK
(Be sure to run as administrator using windows 7)

Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO)
Read and write via OBD (CAN) OK

MJD 6JF Fiat/Opel micro+ eeprom
R/W OBD – K line (MPC555+95320) OK

Opel Signum PSG16 2.2CDTI
read as a Zafira by OBD all OK

Opel Astra 2.0 16V CDTI BOSCH PSG16It
auto checksum and read/write OK

Opel 602/3 full read/write Micro, Flash, EEPROM, via k-line & CAN ok
Opel 603 full R/W Micro, Flash, EEPROM, via k-line & CAN ok
Opel 6JO full read/write Micro & EEPROM, OK via k-line (CAN)


Src:
http://blog.obdexpress.co.uk/2018/07/18/mpps-v21-price/

No comments:

Post a Comment

OBDSTAR DC706 Clone Renault EMS3120 ECM by Boot

  Question: Is it possible to clone Renault Continental EMS3120 TC1738 ECM by OBDSTAR DC706 ? Obdexpress.co.uk engineer replied: Yes. ...