Here are some tips of how to flash TCU of BMW E85 (Z4) using BMW INPA software with a HQ K+DCAN cable or ICOM A2emulator (clone ok).
Car: Z4 3.0I with the ZF 6HP19 transmission
Purpose:want to test different TCU calibration files on my E85 (Z4)
All should be done via a K+DCAN usb cable running working INPA software
Which SGBD does the GKE211 use?
| For Inpa, its the GS19D.prg Winfkp uses 10flash.prg |
Here is a quick and dirty INPA script I wrote for you all for reference:
It sets the protocol to KWP2000 over K-Line and executes the IDENT job.
If it’s unable to use KWP over K-Line, it will display a large red box indicating so.
There are a few ways to execute a custom INPA script.
For quick and dirty testing, the CLI is probably easiest. c:\ec-apps\inpa\bin\inpaload <path to IPO file>:
Code:
c:\ec-apps\inpa\bin\inpaload c:\users\rjahl\downloads\gke211kwp_808.ipo
If you want to add the script to the E85 menu, copy the GKE211KWP_808.IPO file to the SGDAT folder and then edit the E85.ENG file in the CFGDAT folder.
In the [ROOT_GETRIEBE] section of the E85.ENG file, add two lines similar to the following:
Code:
[ROOT_GETRIEBE]DESCRIPTION=TransmissionENTRY=,,ENTRY= GS19,Gearbox / Automatic GS19,ENTRY= gsds2,GS 8.xx / GS 20,ENTRY=,,ENTRY= gs30,Sequential Gearbox SSG,ENTRY=,,ENTRY= GKE211KWP_808,GS19D Ancillary Diagnostics,
Alternatively, you could add a shortcut to the Windows desktop which runs INPALOAD.EXE and calls the custom script.
OK, done and working.
No comments:
Post a Comment