New arrival! GODIAG GT105 ECU Connector is designed for ECU diagnostic & programming connection, short-circuiting OBD2 in the car, drawing power from battery when outdoor on-site vehicle maintenance. No need manual short-circuit OBD2, no more disassembly.
GODIAG GT105 is equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators & 5 functional buttons.
GT105 Buttons Display
GND 4-5 button: Short-circuit OBD2 PIN4-PIN5.
V1-16 button: VW, AUDI, VAG series car activate anti-theft or wake-up anti-theft system.
T4-13 button: TOYOTA, change the engine ECU, the immobilizer ECU needs to be activated synchronously.
M1-4 button: Mitsubishi remote control matching needs to be short-circuited.
P3-7 button: Old Porsche Cayenne key matching needs to be short-circuited.
What can GT105 OBD2 Connector do?
- IMMO AD power adapter function
Supports to program Ford all keys lost with VVDI, AUTEL, OBDSTAR or other anti-theft matching devices.
- All keys lost matching to wake up the meter or anti-theft ECU.
Including VAG 4th& 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne key learning.
- Easy to judge whether programming is normal according to indicator lights.
- Obtain 12V power from car battery.
Provides stable power for outdoor maintenance. Can work with Xhorse Key Tool Plus, VVDI PROG, CGDI Prog, Autel IM608...or key cutting machine.
- Standard OBD2 full protocol ECU programming line(purchased separately).
Can work with MPPS, FGTech, Kess V2...for ECU reading/writing, ECU cloning, ECU tuning.
How to short-circuit GODIAG ECU Connector?
GODIAG GT105 makes short-circuit OBD2 easier, to avoid burning-out caused by misoperation. Each button represents different short circuit methods. Workable for VW, AUDI, TOYOTA, Mitsubishi, old Porsche Cayenne vehicles.
Step1. Press the corresponding button according to short-circuit method of vehicle.
Step2. Turn on ignition, plug GT105 into OBD2 port.
Once the IMMO light flashes, which means it is synchronizing.
How to get outdoor power supply with GT105 cord?
By connecting with GT105 power cord to supply power in case on-site maintenance. Since lots of devices are without outdoor power cords, GT105 has perfectly solved the problem.
Step1. Use GT105 cord to clamp the positive pole & negative pole of storage battery(eg. press T4-13 button for TOYOTA);
Step2. Connect the other end to device directly. Power light will be on after successful connection.
Technical support by: www.obdexpress.co.uk
No comments:
Post a Comment