FormulaFLash Update: Added ME788 ESL Mode & New Checksum

 New update! FormulaFLash Software Version 1.0.0.6 has upgraded to 1.0.0.7. Added ME788 ESL mode and some new checksum. Please keep you device up to dated for latest features.

Update Content

1. ME788 ESL mode, read & write & clone/checkum and IMMO off/idle speed adjustment/power upgrade(world first).
2. New checksum: SIMOS 8.x/MSD80/MSD81/MSD85/MSD87

*Upcoming Updates

1. ME7.8/ME797/ME7971 virtual reading & writing/checksum and one-click operation mode for immo off/idle speed adjustment/power upgrade(world first).
2. ME797/ME7971 BSL read & write & clone/checkum.
3. EDC16/EDC17/MED9 DTC clean and idle speed adjustment solution.

www.obdexpress.co.uk

(Solved) CGDI K2 "Device not connected or driver not installed"

 If you install CGDI K2 Smart Key Tool appearing "Device not connected or driver not installed" error message, please follow the method below to install again.

Solution:

First, check whether K2 is connected to the computer. You can open "This Computer" and check whether there is "CGDI K2".

If the device is connected properly, you need to disconnect CGDI K2 and run "DriverInstall.exe".

• Click "Install" to continue with the installation

• Remove the USB device first, click "Yes" to continue

• Installing…

• Restart the computer

• The MediaTek SP Driver has been installed on the computer, click "Finish" to exit Setup

• Finally, restart your computer and install CGDI K2 software as follows.

Step 1: Open "CGDIK2_Install.exe", the tool will automatically start installing CGDI K2.

Step 2: Installation is complete and prompt: "Installation successfully"

Read also:

CGDI K2 Smart Key Tool "Has Stopped" Issue Solution

http://blog.obdexpress.co.uk/2024/09/25/cgdi-k2-smart-key-tool-has-stopped-issue-solution/

www.obdexpress.co.uk

CG100X Added VW MQB RH850 R7F7014xx 5A and 5C Cluster

 Good news!!! CGDI CG100X Programmer can support Volkswagen MQB RH850 R7F7014xx 5A and 5C clusters mileage correction now. Need to use with D1 adapter and remove capacitors. IMMO data decoding is not supported.

CG100X VW MQB 5A and 5C Cluster Support List:

MQB 5A Cluster Models:

• D70F34xx:

Via removal of capacitor way

• D70F35xxx:

Full Liquid Crystal- Capacitor Removal Way

Full –LCD- Cut Wire or Warp Pin Method

Pointer Meter- Capacitor Removal Way

Pointer Meter- Cutting or Warping Way

• R7F7014xx (R7F701401/ R7F701402/ R7F701407):

Via removal of capacitor way

RH850 5C Cluster Models:

R7F7014xx- Removal of capacitor way

• R7F701401
• R7F701402
• R7F701407
• R7F701404
• R7F701406

CG100X V1.5.8.0 added VW MQB R7F701401/ R7F701402/ R7F701407 (5A and 5C Clusters) on Sept. 20th, 2024.

Update info:

1. Volkswagen MQB-R7F7014xx model supports 5A and 5C meters.
2. Added 11 models to airbag.
3. Added 12 models to read-write.

Volkswagen MQB-R7F7014xx supports the following models.

Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701401 (Supports 5A and 5C Meters)

Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701402 (Supports 5A and 5C Meters)

Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701407 (Supports 5A and 5C Meters)

The following models are added for airbag.

BYD AUTO SA2HG-3658100B-D3 TC222

BYD AUTO SA2HG-3658100A-D2 TC222

Toyota 89170–02T81 R7F701A223

Redflag 3607115-DD41 R7F701010

Geely 8891289835 R7F701010

Geely 6608062184 R7F701010

Chery 407000 446AA TC222–16F

Nissan 98820 4DW2B TC222–16F

ChangAn 3658100-MK08-DF01 TC224–16F

ChangAn 3658100-MK08-DY01 TC224–16F

Great Wall 3658120XKM11A TC222–16F

The following models are added for dashboard read-write.

BMW 65.77–989059601 95512(read write)

Volkswagen 8U0 959 655 B 25640(read write)

Volkswagen 6C0 959 655 AJ TC224 (read write)

Volkswagen 1ED 959 655 AJ TC233–32F (read write)

Volkswagen 3QD 959 655 AJ TC234–32F (read write)

Ford P2ST-14B321-BB TC233–24F (read write)

Trumpchi 8040003AVN0300 TC222–16F (read write)

Trumpchi 8040003DRS0100 TC233–32F (read write)

Redflag 3607115-HT01 TC234–32F (read write)

Geely 1304286 0285B04504 R7F701A033 (read write)

Roewe 11356766–01 TC224–16F (read write)

ChangAn 3658100-MK08-CW01 TC224–16F (read write)

CG100X V1.6.0.0 added VW MQB R7F701404/ R7F701406 (Only 5C Clusters) on Oct.16th, 2024.

Update Info:

1. Volkswagen MQB adds 2 new R7F7014xx mileage repair models.
2. Added 28 models to dashboard.
3. Added 1 model to read-write.

Volkswagen MQB R7F7014xx supports the following models.

Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701404 (Only 5C Meters)

Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701406 (Only 5C Meters)

The following models are added for dashboard.

Dayun winning STM32F103VE

Dayun Zhengtu STM32F103VE

Dayun V9 24C64

Dayun Light Truck xianglong 9S12HY48

Dongfanghong Tractor 24C04

DongFeng DFSK K02L 24LC04

DongFeng Captain 24C256

DongFeng Huashen T3 R5F10TPxxx

DongFeng RuiChi 24C02

FJMOTOR Keyton M70 9S12HA32

FOTON Auman 95640 (Working+Idle duration)

Valley King 80S 25040 (25LC04) (working time)

Valley King 80S 25040 (25LC04) (mileage)

Valley King 80S 25040 (25LC04) (Travel time)

Guangtong auto Box transport vehicle 24C16

Guangtong auto 7-meter highway CAT1023

HaoJue motorcycle MB96F673A

Geely Long RangeE200 9S12ZVH128

Geely Long RangeEL6 25LC1024

JAC Kangling 2024- 24C16

JAC KAIDA 24C16

JAC Kaida X5 2024- 24C08

JMC Elushun 25256

JieFang Hanwei X5043

JINPENG T90 24C02

JOYLONG DAMA X5043

LEVDEO I5 R5F10xxx

Shaanxi Auto Dragon K3000 24C08 V2

The following models are added for dashboard read-write.

Suzuki Ertiga 93C76 (read write)

Note: CG100 Prog III V7.0.8.0 added the same car models as CG100X V1.6.0.0 to dashboard and dashboard read-write, but it doesn’t support VW MQB mileage correction.

CGDI CG100X and VW MQB R7F7014xx 5A& 5C Cluster Wiring Diagram:

R7F701401 (Supports 5A and 5C Meters)

R7F701402 (Supports 5A and 5C Meters)

R7F701407 (Supports 5A and 5C Meters)

R7F701404 (Only 5C Meters)

R7F701406 (Only 5C Meters)

Learn more:

CGDI CG100X VW MQB V850/ RH850 Dashboard and Chip Models Support List:

http://blog.obdexpress.co.uk/2024/08/05/cgdi-cg100x-vw-mqb-rh850-v850-mileage-correction-support-list/

www.obdexpress.co.uk

OBDSTAR MOTO Cluster Recalibration & DIAG Software Update in Oct.

 Here we’ve collected OBDSTAR MOTO Cluster Recalibration & DIAG Software Major Upgrade in October. Involving OBDSTAR MS50, MS70 and MS80 motorcycles diagnostic tool. Please keep your device update to dated for new features.

MOTO Cluster Recalibration Software Upgrade

• APRILIA V30.00 [First Release]

Add mileage calibration function for below models:

APRILIA DORSODURO

APRILIA RS 660 2023-

APRILIA RS 660 -2022

APRILIA RSV4

APRILIA RSV4 1100 TFT 5"

APRILIA SHIVER

APRILIA TUONO

APRILIA TUONO 660 2023-

APRILIA TUONO 660 -2022

APRILIA TUONO 1100 TFT 5"

• Supported Tools

OBDSTAR MS80

MOTO DIAG Software Upgrade

• VOGE V33.01

Add Brivido 525R model.

• Supported Tools

OBDSTAR MS80

• BETAMOTOR V33.01

Add below models:

ALP 4.0/ALP X 350 4T

RR-RS

RR-S

RX 450 4T

• SHERCO V33.01

Add below models:

125 SM 2T

125 ST

250 ST

300 ST

500 SMF

• ROYAL ENFIELD V33.01

Add below models(non EU market type):

Meteor 350

Scram 411

Continental GT

…

• Supported Tools

OBDSTAR MS80/ MS70/ MS50

www.obdexpress.co.uk

How to Purchase European SGW and X-431 FIX License for LAUNCH X431?

 Great news!!! LAUNCH Official newly released major notices for users in October 2024.

Now users can directly purchase LAUNCH European SGW Function License and X-431 FIX (HaynesPro) European Database License in the "Mall" of Launch X431 PAD V Elite, PAD VII Elite and PRO5 SmartLink. Other X431 tools are not supported.

1.LAUNCH European SGW Function License

This license package includes the items below:

• Mercedes Benz gateway license (1 year)
• FCA & Maserati gateway license (1 year)
• Renault & Dacia 50 connections

*Need to renew license after it expires.

Price:

$1151 + 19% VAT (check actual price in your tablet)

Payment:

Via Paypal

Date for processing:

Serial Number on device required and allows 3 working days for activation.

Security Gateway:

With the entry into force of EU Regulation 2018/858, more and more vehicle manufacturers have started to protect access to vehicle electronics via the OBD Interface using so-called security gateway modules. This has an Impact on the previously unrestricted communication between the vehicle diagnostic device and the respective vehicle. LAUNCH Europe GmbH currently offers SGW activation for FIAT Chrysler Automobiles, Mercedes and Renault / Dacia models to enable activation and thus full access to all diagnostic functions again.

MERCEDES:

As part of a co-operation agreement with Mercedes, LAUNCH Europe GmbH enables SGW activation for all vehicle models equipped with Security Gateway technology. In this way, unrestricted vehicle communication between the vehicle diagnostic unit and the vehicle can be realized again and all diagnostic functions can be used in full.

Renault & Dacia:

As part of a co-operation agreement with Renault / Dacia, LAUNCH Europe GmbH enables the SGW activation of all vehicle models equipped with the Security Gateway technology. In this way, unrestricted vehicle communication between the vehicle diagnostic unit and the vehicle can be realized again and all diagnostic functions can be used in full.

Fiat Chrysler Automobiles:

As part of a cooperation agreement with the FCA Group, LAUNCH Europe GmbH enables SGW activation for all vehicle models equipped with Security Gateway technology. In this way, unrestricted vehicle communication between the vehicle diagnostic unit and the vehicle can be realized again and all diagnostic functions can be used in full.

How to purchase LAUNCH European SGW Function License?

Step 1: Go to the main menu of X431 PAD V, X431 PAD VII or X431 PRO5 SmartLink tablet

Step 2: Select Mall>> Other Goods>> European SGW Function License

Step 3: Check the product details, and click [Buy now]

Step 4: Click [Delivery information] icon

Step 5: Click [Added new delivery address] at the bottom right of the page

Step 6: Enter your name, phone number, email, delivery address

Step 7: Confirm the order, and click [Go to Pay]

Step 8: Enter your email address or mobile number to pay with PayPal

If you want to change your personal info before delivery, click the [Personal center] icon on the up-right side of the Other Goods page, and click [Delivery address management]>> Edit to change.

If you want to delete the default address, click [Delete].

After purchasing and activating this EU SGW License, you can unlock gateway on Mercedes models produced after 2020, FCA & Maserati, and Renault & Dacia models, and can check the vehicle information, read DTC, read data stream, perform actuation test and special functions.

Note: If you don’t unlock the SGW, you can only perform "Vehicle information", "Read DTC" and "Read data stream" functions.

2.European Database License X-431 FIX (HaynesPro)

This license includes CarSET PRO 1 year.

Price:

$1,915+ 19% VAT

Payment:

Via Paypal

Date for processing:

The serial number on the device is required, and 3 working days are allowed for activation.

Menu function path:

Go to Mall>> Other Goods>> European Database License X-431 FIX, HaynesPro>> Buy Now

CarSET Pro (Car):

The new LAUNCH PRO database package includes many essential features for the workshop. The CarSET PRO database provides Instant access to a wide range of Technical Service Bulletins (TSBs), as well as links to fault codes and related case descriptions in original equipment manufacturer (OEM) quality. In addition, it includes tried-and-tested problem solutions and tips as well as guided vehicle diagnostics. The CarSET PRO database also offers wiring diagrams, installation locations and fault code information for all vehicle systems (engine management system, ABS, ESR air conditioning). The database includes all common data from European and US vehicle manufacturers and is continuously being further developed.

Note:
The X431 FIX function is not available for trial before purchase.

How to use X431 FIX function on X431 PAD V, PAD VII and PRO5?

http://blog.obdexpress.co.uk/2023/02/17/how-to-use-launch-x431-fix-database-new-function/

www.obdexpress.co.uk

LAUNCH X431 CRP919 EV Function, Coverage, Specification

 New arrival! LAUNCH X431 CRP919 EV is an intelligent and networkable diagnostic scanner that is specially designed for electric vehicles. It covers for more than 120 models to support code reading, code clearing, data stream reading, action test, coding, etc.

Software Function

Vehicle Coverage

Click Here: LAUNCH X431 CRP919 EV Support Software

Specifications

www.obdexpress.co.uk

GODIAG GT105II OBD2 BreakOut Box User Guide

What is GODIAG GT105II OBD2 Breakout Box?

GODIAG GT105II is the upgraded version of GODIAG GT105. It newly added 5 new functions incl. vehicle voltage display, car remote control battery CR2032 battery test, car battery voltage alarm prompt (lower than 11V), TOYOTA steering angle matching, and Lamborghini ID48 key IMMO auxiliary activation.

GODIAG GT105 II VS GODIAG GT105 ECU IMMO Prog AD:

GODIAG GT105II Highlights:

• A full-protocol ECU connection line for ECU programming power adjustment.
• OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
• PIN4 and PIN5 can be switched between short-circuit and non-short-circuit.
• Standard OBD2 independent PIN4, PIN5.
• Pure copper female seat supports repeated insertion and removal, and has a long service life.
• Battery clip treated with environmentally-friendly salt spray, with a thickness of 0.5mm.
• The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
• The DC connector has a resettable 7A fuse.
• DC power interface, dedicated laboratory power connector.

IMMO AD power adapter function:

After 2016, for Ford all smart keys lost, GT105 II cooperates with VVDI equipment (OBDSTAR, AUTEL,) and other anti-theft matching equipment to program the keys.

All car keys lost matching:

Wake up the meter or wake up the anti-theft ECU. (Support VAG 4th and 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne car for IMMO key learning.)

VPW, CANH, CANL, K-Line indicator lights:

The indicators can judge the communication status between the vehicle and the diagnostic programming device. (If the product is used to connect the device, the user can simply judge whether the diagnostic programming is normal or not according to whether the device can send communication.)

On-site Maintenance:

The GT105 II power adapter cable obtains 12V power from the car battery. (For programming equipment such as Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, IM608, etc., it provides 12V power supply when they need power outdoors, so as to read the data of BMW BENZ IMMO ECU, or other car ECUs, and finally realize the on-site maintenance of outdoor faulty vehicles.)

Provide 12V power supply for the key cutter (12V):

Standard OBD2 full protocol ECU programming line. (With MPPS, FGTech, Kess v2, etc., for ECU data reading and writing, ECU cloning, ECU tuning, etc.) (Note: OBD2 full protocol ECU programming line is purchased separately)

OBD Battery Replacement Tool:

Realize the uninterruptible power supply during the battery replacement, so it can prevent data loss, key failure or re-matching caused by power interruption during the battery replacement.

With GT105 II, you can enjoy the functions listed below during the battery replacement:

1.The clock does not change.

2.The speaker is not locked.

3.IMMO is not locked.

4.Glass door is not set.

5.The throttle is not set.

6.The warning light is off.

7.No fault code.

In addition, GODIAG GT107+ GT105 or GODIAG GT107+ GT105II can work with PCMFlash,DFBFoxflash, PCMTuner, and KESS V2, etc to program DSG gearbox on bench.

GODIAG GT105 II ECU IMMO Prog AD:

https://www.obdexpress.co.uk/wholesale/godiag-gt105-ii-ecu-immo-prog-adapter.html

www.obdexpress.co.uk