How to generate Toyota emergency key with Antenna by Lonsdor K518 Pro?
Check the detailed operation guide below.
Procedure:
Car model: i.e. TOYOTA 8A 2016
1.Connect K518 Pro key programmer and a Toyota car via OBD cable
2.Supply power to the tablet as well
3.Make sure the car is in all keys lost situation (cannot switch ignition on)
4.Connect Lonsdor K518 Pro to WiFi
5.Select Immo& Remote>> Toyota>> Select from type>> All smart key lost>> Type 2 (2016)>> 8A>> Generate emergency key (LKE/PRC Antenna)
6.Pay attention to the on-screen prompt
This function can load backup data to generate an emergency key in AKL situation, then you use the key to turn on dashboard to add keys.
7.Connect K518 Pro Antenna and place the antenna’s top into the card slot
8.Select one TOYOTA bin file
9.Start upgrading APP… wait a moment and don’t move the key.
10.Then the emergency key will be generated successfully.
11.Use the emergency key to turn ignition on, and then enter [Add smart key] function menu to add new keys
Operation hints:
1 Press ignition switch once.
2.Quickly place Simu-Antenna vertically on ignition switch, keep the Simu-Antenna’s top aimed at the central position of ignition switch, and wait until dashboard lights up.
- If dashboard fails to light up after 3s, pls try to repeat step 1 &2.
4.If dashboard falls to light up after multiple attempts, pls contact after-sales for technical support
Please kindly notice:
Before you generate the emergency key, don’t forget to connect the Antenna to Lonsdor K518 Pro Key Programmer and place the Antenna’s top into the card slot. Otherwise, you will get the error message "Failed to Generate! Error 00" (as shown in the figure below).
No comments:
Post a Comment