Alientech Kess3 ECU Programmer released a new upgrade on June 19th, 2024.
With KESS V3, you can read and write via OBD the Magneti Marelli 11GF ECUs installed on FCA Group segment A vehicles and the Bosch MED17.8.10.1 ECUs installed on DFSK Motor SUVs. And that’s not all: you can also work on bench on several other engine control units from Mercedes, Audi, Fiat, DFSK Motor, and Ford, as well as the TCU Bosch ZF AL551/8HP55 and Bosch ZF ES10–1002. This upgrade not only enhances vehicle performance but also enables precise repairs and fuel consumption reduction, meeting the increasingly sophisticated needs of your customers.
Focus on the new ECUs in this development:
- ECU — OBD
Magneti Marelli 11GF
Bosch MED17.8.10.1
- ECU — BENCH/BOOT
Bosch ME2.7.2
Bosch ME2.7.1
Bosch MED7.1.1
Bosch ME7.6.3
Bosch MED17.8.10.1
Delphi DDCR C167/29F200
TCU — BENCH/BOOT
Bosch ZF AL551/8HP55
Bosch ZF ES10–1002
Magneti Marelli 11GF
KESS3 CAR OBD
FIAT RD, WR in OBD
LANCIA RD, WR in OBD
Bosch MED17.8.10.1
DSFK MOTOR RD, WR in OBD
Bosch ME2.7.2
MERCEDES-BENZ RD, WR in Boot Mode
Bosch ME2.7.1
MERCEDES-BENZ RD, WR and Clone in Boot Mode
Bosch MED7.1.1
AUDI RD, WR and Clone in Boot Mode
Bosch ME7.6.3
FIAT RD, WR and Clone in Bench Mode
Bosch MED17.8.10.1
DSFK MOTOR RD, WR in Bench Mode
Delphi DDCR C167/29F200
FORD RD, WR and Clone in Boot Mode
Bosch ZF AL551/8HP55
AUDI RD, WR and Clone in Bench Mode
VOLKSWAGEN RD, WR and Clone in Bench Mode
Bosch ZF ES10–1002
DACIA RD, WR and Clone in Boot Mode
RENAULT RD, WR and Clone in Boot Mode
Activate the Kess3 CAR OBD Protocols, Car Bench & Boot protocols to work in any connection mode on the new developments by Alientech. Stay one step ahead of the competition and keep your KESS3 subscription active to not miss any updates.
No comments:
Post a Comment