Today I'm gonna use OBDSTAR X300 DP Plus to program 2020 Hyundai Elantra all keys lost with free pincode. Here are 2 keys to be programmed. Following I'm gonna show how to do.
Read Pincode
CAR IMMO >> HYUNDAI KIA GENESIS >> Latest version >> Read PinCode >> PROXIMITY >> 8A Proximity — Hitag 3
This function is available by connecting the server, please ensure the Internet connection is normal.
Turn off the ignition, then open and close the driver's door once.
Reading data…
Pincode: 212243
It has been successfully read out, just take a photo for record.
Program Smart Key
Manual select model >> HYUNDAI >> AUSTRALIA >> ELANTRA >> 2015–2020 >> PROXIMITY >> Program smart keys
Please press start button, press ENTER to continue.
After this function is executed, all keys will be erased and re-programmed to use.
If you need to perform this function, please have all the keys ready.
Press "Enter" to continue.
Switch ignition off.
Open driver door, then close the door.
Please input the Pincode: 212243
Note: Three consecutive incorrect Pincode will cause the ECU to enter the IMMO state!
Press the ENTER button, then within 5s, use the top of the proximity key(the end with the indicator) to keep pressing the start/stop button for 5s, then immobiliser light will flash.
(If the operation fails according to the prompt, please remove the key housing and perform this function again)
Press "Enter".
Within 5s, use the top of the proximity key to keep pressing the start/stop button for 5s, the immobiliser light will flash.
Program success.
Press "Enter" to program next key…
The number of current keys: 2
Test the 2 keys, both can work normally.
Perfectly done.
This is how to program 2020 Hyundai Elantra all keys lost with OBDSTAR Key Master Plus successfully.
No comments:
Post a Comment