OBDSTAR DC706 ECU Tool with BODY/CHASSIS/OTHER V30.15 can read/write EEPROM, and read/change/off code for Ford SONY TMS470 Radio via OBD and Bench.
Preparation:
Ford SONY TMS470 Radio
OBDSTAR P004 ECU Clone Jumper
Main Cable
OBDSTAR DC706 Tablet
Important!
Keep DC706 charging and communicating during the process, also ensure the internet connection is normal.
Menu path:
Select ECU Flasher>> All>> BODY/CHASSIS/OTHER>> BODY/CHASSIS/OTHER V30.15>> BRAND FORD>> MODULE RADIO
Quickly search for the corresponding radio model- Ford RADIO VISTEON SONY TMS470 (OBD/BENCH)
Operation steps:
Click [Guide] and [Pinout] to check the related operation instruction and wiring diagram separately
Connect P004 Adapter to the Ford radio via the P004 ECU Clone Jumper, and connect P004 Adapter to DC706 via the main cable
After connection, click [Start] and select [Bench] mode
Switch on OBDSTAR P004 Adapter
Click [Code Read] to read code successfully. It's 1234.
Reboot P004 Adapter, and enter the pincode 1234 on Radio to verification
Verify Pincode successfully
Click [Code Change] to input a new code 4567. Operation success
Reboot P004 Adapter, and enter the new pincode on Radio to verification
Verify Pincode successfully as well
Click [Read eeprom] to read the EEPROM data and save it after reading.
Click [Write eeprom], select load external data and choose the original eeprom data just saved to write into the Ford radio.
Besides Ford SONY TMS470, OBDSTAR DC706 also supports 6000CD NEC70F3357/ TMS470, SONY NEC70F3357 and SONY 6CD TMS470 radios. Most radio ECUs support OBD and Bench modes, only 6000CD TMS470 supports OBD and Boot modes.
Attach the OBDSTAR DC706 Ford Radio Support List below.
No comments:
Post a Comment