Yanhua Mini ACDP + Module 12 Program Volvo Add Key & AKL

 This is a tutorial on how to use Yanhua Mini ACDP + Module 12 to program Volvo key adding & all keys lost. Need to remove the CEM module from vehicle, which is behind the copilot glove compartment.

To check connection info, please click "Help".

Required Accessories

OBP+ICP adapter

ACDP host

8PIN cable

CEM interface board

CEM module

Install CEM interface board.

Align D1-D4 test points. Lock the board with PCB lock. As long as D1-D4 test points are aligned, then all test points are aligned.

Connect OBP + ICP adapter & CEM interface board with 8PIN cable. Connect ACDP host & power up.

Operation

Mini ACDP>> Volvo >> IMMO >> S80(2009–2016) >> Semi-Keyless >> Read CEM password >> ICP mode(Recommended)

Follow the help prompts to properly connect the adapter, interface board and CEM module.

Pin detection passed. If the detection fails, please check and clean the test point.

Check the vehicle info, press "Continue".

Save CEM password data.

Put CEM module back to the vehicle. Connect ACDP host with vehicle OBD port.

Add key >> OK

Press Start button in the car.

Make sure CEM module is installed, press "OK".

Select CEM password data file.

Check VIN number & the number of keys, press "Continue".

Insert the key to be programmed into the card slot.

Confirm the number of keys after adding new key.

Add key successfully!

www.obdexpress.co.uk