Today I'm going to program this 2015 Mitsubishi Outlander Sports all keys lost with Autel MaxiIM KM100 Immo Key Programmer. Before that, I should cut a key blade with key cutting machine.
Having got the key code from car door cylinder: 30188, let's go straightly to cut the key with Xhorse Dolphin XP005L machine.
After cutting finished, insert the key into ignition to next step.
Connect Autel KM100 to OBDII port:
IMMO programming >> VIN >> OK >> XNSHL# >> Yes >> Blade key >> Control unit >> Immobilizer(CAN) >> Remote control learning >> Remote control learning
Notice: This function will clear all learned remote controls and then relearn.
Press "OK".
Enter a 4-digit password.
Press LOCK & UNLOCK at the same time and do not release until the remote control indicator lamp flashes 5 times. Press UNLOCK and then release after the indicator lamp flashes 2 times. Then, the indicator lamp flashes once again. If multiple remote controls need to be learned, repeat the above operation.
Learning is completed.
Put the circuit board & a battery into the key shell.
Return back to
Hot function >> all keys lost(guided)
Notice:
This function will clear all learned keys an then relearn.
OK >> Start
Autel KM100 will process it automatically, just wait until finished.
Learning succeeded.
Turn off the ignition to test the key.
The car can successfully started, and all remotes work.
Done.
No comments:
Post a Comment