Thursday, 29 September 2022

Possible Godiag GD801 Adjust Odometer on 2017 Ram ProMaster?

 Question:

Does Godiag GD801 support mileage correction for the 2017 Ram ProMaster?

If yes, how to do it?

obdexpress.co.uk engineer replied:

Yes, GD801 can read and write KM for this Ram car model via OBD.

Check the car list currently supported by GD801 below.

Godiag GD801 correct mileage for 2017 Ram ProMaster

The quick guide to correct mileage by Godiag GD801:

Record the current mileage value of vehicle dashboard

Connect GD801 to the vehicle via the main cable

Turn on GODIAG GD801

Tap Diag Program>> Cluster calibrate>> CHRYSLER DODGE JEEP >> CHRYSLER latest version -> car maker>> car model>> car year>> Mileage Calibration

Read notes on the screen

Then input a new mileage value

Wait a moment till the calibration is completed

Then the new value will appear on the dash.

Godiag GD801 correct mileage for 2017 Ram ProMaster

Godiag GD801 correct mileage for 2017 Ram ProMaster

Godiag GD801 correct mileage for 2017 Ram ProMaster

www.obdexpress.co.uk


How to connect KT200 and ECU?

 Which ECU can work with KT200 ECU programmer via Bench, BOOT, or BDM/JTAG? How to connect KT200 and ECU? Where to find the connection diagram?

Here are details for you.

KT200 connection diagram:

BENCH mode connection (e.g.EDC16/ME9/EDC7/SIMOS/Denso Renesas):

KT200-ECUs and connection methods

BDM and BOOT mode connection:

KT200-ECUs and connection methods

JTAG and BENCH connection with automatic gearbox:

KT200-ECUs and connection methods

Three ways to check KT200 wiring diagram:

Method 1: In KT200 software folder: C:/KT200-master/DOCUMENTS/help directory

KT200-ECUs and connection methods

Download https://mega.nz/file/cS0xBAoT#FaEMOcDhGdoDogrSq85Bmdwn6J2ADyI5e-MGdZI8RnE and extract it to local drive and open documents.htm

With DOCUMENTS.htm you can easy search ECU and wiring instructions.

KT200-ECUs and connection methods

Note: The download link also contains more than 1,400 ECU wiring diagram pinouts in PDF format.

Method 2: Open KT200 software, enter 'Select Driver' interface, after selecting the driver mode, car maker, vehicle and driver, click 'INFO' at the bottom right corner of the screen to check the corresponding wiring diagram

KT200-ECUs and connection methods

Method 3: Check from ECU HELP 3.0 software

KT200-ECUs and connection methods

KT200 Read Write ECU Models List:

  • Full Read and Write via pinout in Bench Mode:

BOSCH EDC7

BOSCH EDC16

BOSCH ME9/MED9

  • Full Read and write via Pinout in Bench Mode:

BOSCH MD1

BOSCH MG1

-FREESCALESPC5777

-AURIXTC29x

-STSPC58

  • Full Read and Write via Pinout in Bench Mode:

BOSCH EDC17

BOSCH MED17/ME17

SIEMEN SPCR2.1

(Unlocking also possible via pinout)

  • Full System via Pinout (Micro/Flash+ EEPROM) of ECUs:

BOSCH

CONTINENTAL

DELCO

DENSO

MARELLI

SIEMENS

TEMIC

TEMIC

  • BDM JTAG Modes For:

BDM MPC55x

BDM MPC56x

BDM MC32/ZC32

BDM HC12/S12x

JTAG NEXUS MPC/SPC56xx

JTAG NEXUS MPC55xx

JTAG RENESAS

SH7055

SH7058

SH7059

SH7251

SH72543

SH72544

JTAG NEC76F00xx

76F0038AGD

76F0038GD

76F0039AGD

76F0039GD

76F0040GD

76F0070

76F0070

76F0085

  • BOOT Modes:

-BOOT MODEC16729Fxxx

-BOOT MODE ST K-LINE/RX-TX/CAN

ST10F168

ST10F269

ST10F273

ST10F275

ST10F276

ST10F276

ST10F280

ST10F296

-BOOT Mode Tricore for micro

TC1724

TC1728

TC1738

TC1738

TC1762

TC1766

TC1767

TC1782

TC1791

TC1792

TC1793

TC1793

TC1796

TC1797

-BOOT Mode Renesas

SH7052

SH7054

SH7055

SH7055

SH7058

SH7059

SH7251

SH72543

SH72544

-BOOT Mode Mitsubishi

MH7202

MH7203

MH8102F

MH8105F

MH8106F

MH8202

MH8206F

MH8301F

MH8301F

MH8304F

MH8405F

-BOOT BAM System MOTOROLA

SPC5674

SPC5777

-BOOT MODE Fujitsu

-BOOT MODE Hitachi

  • Additional Package for Automatic Transmission:

Full Read and Write TCU (MICRO+EEPROM)

TCU CLONING

TCU CODING FUNCTIONS

KT200/KTM200 ECU Support List

KT200/KTM200 TCU Support List

www.obdexpress.co.uk


What function can OBDSTAR MK70 motorcycle key programmer do?

 OBDSTAR MK70 is a 7-inch motorcycle immobilizer key programmer to support mileage correction by OBD/Bench as well. Users can recalibrate BRP, DUCATI odometer by OBD as long as adding optional package purchase.

OBDSTAR MK70 motorcycle key programmer

Highlights

  • Supports HONDA, SUZUKI & YAMAHA motorcycle read pincode with original key(charging by times).
  • Supports BRP, DUCATI odometer recalibration by OBD(optional).
    1. Remarks:

      BRP, DUCATI Motorcycle for Mileage Correction is included in optional package.

      Functions

    2. IMMO by OBD/ Bench
      1. Supports APRILIA, BMW, BRP, DERBI, DUCATI, GILERA, HARLEY-DAVIDSON, HONDA, INDIAN, ITALJET, KAWASAKI, MOTO GUZZI, PEUGEOT, PIAGGIO, POLARIS, SUZUKI, TRIUMPH, VESPA, YAMAHA.

      2. Make Key by Dump
        1. Supports APRILIA, BMW, DUCATI, HONDA, KAWASAKI, PIAGGIO, SUZUKI, YAMAHA.

        2. Programmer by Dump(Odo Recalibration)
          1. Supports APRILIA, BENELLI, BMW, BUELL, CAGIVA, DUCATI, GENERIC, HAOJUE, HARLEY-DAVIDSON, HONDA, KAWASAKI, KTM, KYMCO, MV AGUSTA, PEUGEOT, PIAGGIO, SUZUKI, TRIUMPH, YAMAHA.

          2. ODO meter by OBD(optional)
            1. Supports BRP, DUCATI.

              OBDSTAR MK70 motorcycle key programmer

              More questions please contact us.

              www.obdexpress.co.uk

              Wednesday, 28 September 2022

              What vehicles and features does the OBDSTAR MK70 support?

               OBDSTAR MK70 is newly designed to perform motorcycle immobilizer programming, mileage correction for locksmiths with powerful help data files. It's an easy-to-use and portable 7-inch tablet, based on RK3128 quad-core Samsung Exynos processor. It can be used to read pincode on Honda/Suzuki/Yamaha motorcycle with original key (charging by times) by OBDSTAR P001 programmer and recalibrate odometer on BRP/DUCATI by OBD/Bench (optional).

              OBDSTAR MK70 Main features:

              • Supports Motorcycle IMMO by OBD/Bench
              • Supports Motorcycle make key by dump (RFID)
              • Supports Motorcycle programmer (Odometer Recalibration) by dump
              • Supports Motorcycle odometer recalibration by OBD/Bench (BRP, DUCATI)

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              OBDSTAR MK70 vehicle coverage:

              1.Motorcycle key programming by OBD/dump support series:

              APRILIA, BMW, BRP, DERBI, DUCATI, GILERA, HARLEY-DAVIDSON, HONDA, INDIAN, ITALJET, KAWASAKI, MOTO GUZZI, PEUGEOT, PIAGGIO, POLARIS, SUZUKI, TRIUMPH, VESPA, YAMAHA…

              2.Make Key by dump support series:

              APRILIA, BMW, DUCATI, HONDA, KAWASAKI, PIAGGIO, SUZUKI, YAMAHA

              3.Programmer (Odometer Recalibration by dump) support series:

              APRILIA, BENELLI, BMW, BUELL, CAGIVA, DUCATI, GENERIC, HAOJUE, HARLEY-DAVIDSON, HONDA, KAWASAKI, KTM, KYMCO, MV AGUSTA, PEUGEOT, PIAGGIO, SUZUKI, TRIUMPH, YAMAHA

              4.Odometer Recalibration by OBD/Bench support series (Optional):

              BRP, DUCATI

              Check the detailed car model, download OBDSTAR MK70 Car List.

              OBDSTAR MK70 menu function display:

              • Menu function incl. IMMO, RFID, Programmer, Personal center, data management, support, settings and upgrade

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              • IMMO-Supported Brands:

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              • IMMO-BRP:
              • CAN-AM (BRP)

              COMMANDER, DEFENDER, DS, MAVERICK, OUTLANDER, RENEGADE

              • LYNX (BRP)

              ADVENITURE, BOONDOCKER, COMMANDER, RANGER, RAVE, XTERRAIN

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              • SEA-DOO (BRP)

              FISH PRO, GTI, GTI SE, GTR, GTS, GTX

              • SKI-DOO (BRP)

              EXPEDITION, FREERIDE, GRAND TOURING, GSX, GTX, MX Z

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              BRP main function: Keys information, add a key, all keys lost, erase key

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              • IMMO-Help Files & Guide:

              You can check the corresponding wiring diagram between motorcycle and MK70 and operation instruction

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              OBDSTAR MK70 Motorcycle Immobilizer Key Programmer Package List:

              1pc x MK70 tablet

              1pc x M001A

              1pc x M003A

              1pc x M034

              1pc x M042

              1pc x M043

              1pc x P001

              1pc x 12V2A charger

              OBDSTAR MK70 Main Feature, Vehicle Coverage, Menu Function Display

              If you are interested in this new Motorcycle Immobilizer Key Programmer, please go to https://www.obdexpress.co.uk/wholesale/obdstar-mk70-motorcycle-key-programmer.html

              www.obdexpress.co.uk


              SVCI 2020 software PorscheLoader network error solution

               Customer problem:

              I have connected SVCI 2020 and my Porsche car well, but when I run PorscheLoader V4.1 software on Win10 64 bit, I got the error message 'An internet exception occurred (0xafdedb9), Please, contact support@ oreans.com. Thank you!' (See the figure below). I could open PorscheLoader V7.1, but V4.1 failed. I tested on another computer and system, closed the anti-virus software and reinstalled the SVCI 2020 software, but still failed. How to fix it?

              SVCI 2020 software PorscheLoader network error solution

              SVCI 2020 software PorscheLoader network error solution

              Obdexpress.com engineer's solution:

              It requires running on WIN XP so that it can open Porsche software.

              1.Install the SVCI2020 software on the 64-bit system

              2.Copy the SVCI2020 installation directory to the same root directory on the XP operating system

              3.Run the SVCI2020 Porsche software (open Shortcut to Quickloader on desktop)

              4.Then you can perform the function you desire.

              SVCI 2020 software PorscheLoader network error solution

              SVCI 2020 software PorscheLoader network error solution

              Try to use the solution above to resolve the SVCI 2020 Porsche V4.1 not working problem. If it still cannot be solved, please feel free to contact our customer service for help.

              E-mail: sales@OBDexpress.co.uk

              Skype: obd2express.co.uk

              WhatsApp: 0086–18750906257

              www.obdexpress.co.uk

              Fetrotech Tool Demo: Reading BMW and Audi ECUs

               Fetrotech Tool ECU Programmer has 2 colors of version to support MG1 MD1 EDC16 MED9 MED17 ME17 EDC17 Serial ECU. Black version can be used alone, silver version should work with PCMtuner Tool. Following is a quick demo to show how to read BMW & Audi ECU.

              Fetrotech Silver + PCMtuner Read BMW Flash Data

              Check video:

              https://www.youtube.com/watch?v=y89rdUEGopw

            2. Connect Fetrotech Silver to PCMtuner.
            3. Connect BMW ECU to Fetrotech Silver via colored jumpers.
            4. Connect all together to a PC.
              1. read Audi and BMW ECU flash data with Fetrotech Tool

                read Audi and BMW ECU flash data with Fetrotech Tool

                Fetrotech Black Read BMW Flash Data

                Check video:

                https://www.youtube.com/watch?v=wDmXU2ggZt0

              2. Connect BMW ECU to Fetrotech Black via colored jumpers.
              3. Connect to a PC via USB cable.
                1. read Audi and BMW ECU flash data with Fetrotech Tool

                  Open Fetrotech Tool software to select ECU model:

                  Bosch MD(G)1 ECU TC2XX-V1.0.0.3 >> Micro ID >> Read

                  Read MG1CS003 TC298TP data success.

                  Save Flash data file.

                  read Audi and BMW ECU flash data with Fetrotech Tool

                  read Audi and BMW ECU flash data with Fetrotech Tool

                  Fetrotech Silver + PCMtuner Read Audi MED9.1 Flash Data

                  Check video:

                  https://www.youtube.com/watch?v=wjkxFEE5EKI

                2. Plug connector into one side of Fetrotech Silver, connect the other side to PCMtuner.
                3. Connect the colored jumper to Fetrotech Silver, the other end to ECU.
                4. Connect USB cable to Fetrotech Silver & PC.
                  1. read Audi and BMW ECU flash data with Fetrotech Tool

                    Fetrotech Black + PCMtuner Read Audi MED9.1 Flash Data

                    Check video:

                    https://www.youtube.com/watch?v=y1nECH8Xs_g

                  2. Connect MED9 ECU to Fetrotech Black.
                  3. Connect to PC
                    1. read Audi and BMW ECU flash data with Fetrotech Tool

                      Open Fetrotech Tool software to select ECU model:

                      VAG MED9 ECU — V.1.0.1.10 >> Micro ID >> Read

                      Read data success.

                      Save data file.

                      read Audi and BMW ECU flash data with Fetrotech Tool

                      www.obdexpress.co.uk

                      Tuesday, 20 September 2022

                      KT200 Read and Write TOYOTA DENSO 275036-4520 by JTAG

                       KT200/KTM200 ECU programmer can read and program engine control units via OBD/ BENCH/ BOOT/ BDM/ JTAG. Here obdexpress.co.uk will share the guide of how to use KT200/KTM200 ECU programmer to read and write TOYOTA DENSO 275036–4520 by JTAG mode.

                      Step 1. Connection

                      Open KT200 software (version: 22.08.20)

                      Click 'Select Driver'

                      Select BDM/JTAG>> BDM/JTAG MODE>> JTAG NEC 76F00xx>> NEC 76F0038AGD

                      Click 'INFO' to check the wiring diagram

                      read TOYOTA DENSO with KT200

                      Select TOYOTA>> DENSO 275036–4520, then you can see the Pinout diagram

                      read TOYOTA DENSO with KT200

                      read TOYOTA DENSO with KT200

                      read TOYOTA DENSO with KT200

                      Connect KT200 and ECU via the Pinout cable and transfer cable

                      read TOYOTA DENSO with KT200

                      read TOYOTA DENSO with KT200

                      Step 2. Read original ECU data

                      Back to the select driver interface

                      Click 'OK' to enter the operation page

                      Select 'CONNECT' to detect the original ECU info

                      read TOYOTA DENSO with KT200

                      Then select 'Read All'

                      Create a new folder to save the original data

                      Step 3. Write Flash and EEPROM data to new ECU

                      Change to a new ECU for connection

                      Select 'Write in Flash Micro' and 'Write Eeprom' separately to write modified ECU data

                      Load the original file for checksum correction

                      Wait a moment to write data

                      Write data successfully by KT200 chip tuning tool.

                      read TOYOTA DENSO with KT200

                      read TOYOTA DENSO with KT200

                      read TOYOTA DENSO with KT200

                      Done!

                      For which ECU is supported by KT200, please check KT200 ECU Support List.

                      www.obdexpress.co.uk

                      How to Change PH0440B Frequency with Lonsdor K518ISE?

                       Lonsdor K518ISE Key Programmer is able to change PH0440B, P0020B, P0120B smart key frequency. These keys are designed for Toyota 8A key programming. Follow the steps below to learn how to do.

                      Lonsdor K518ISE path:

                      Special functions >> Key settings >> FT smart key >> 8A >> Modify frequency

                      Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                      Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                      Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                      Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                      Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                      Put a Lonsdor PH0440B circuit board into K518 key slot.

                      Note:

                    2. Key requires battery installed properly.
                    3. Place key horizontally on the card slot, easier to identify.
                      1. Click "OK".

                        Select PKE frequency: 315.10/314.35MHz >> OK

                        Generated successfully.

                        Key frequency has been changed!

                        Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                        Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                        Lonsdor K518ISE change Toyota 8A key(PH0440B) frequency

                        www.obdexpress.co.uk

                        Yanhua Mini ACDP 2 Add 2012 Porsche Cayenne Success

                         This is a quick demo on how to add 2012 Porsche Cayenne key with Yanhua Mini ACDP 2 + Module 10 by bench. Step1. Remove the KVM from und...