Yanhua FEM/ BDC Special Programming Clip: Installation and Usage Introduction

 Yanhua FEM/ BDC Special Programming Clip is designed to read BMW 95128/95256 chip without having to disassembly. No need to remove or solder, easy to work with diagnostic tools such as ACDP, Xhorse, Autel, CGDI, Xtool, etc.

How to install Yanhua FEM/ BDC Clip?

Here's taking Mini ACDP& BDC module as example.

Prepare all the accessories:

FEM/BDC interface board

OBP+ICP adapter

ACDP host

20PIN cable

12V cable

8PIN cable

8PIN socket

Cleaning probe

Yanhua FEM/ BDC Clip

BDC module

Note: If the smaller hole on the PCB is blocked by the tri-proof adhesive, use the cleaning probe to clean it up.

Install the BDC special programming clip:

- Insert 2 screws of the special programming clip into the the PCB plate 2-holes.

- Lock the PCB lock.

Connect the 8PIN cable.

Connect 8PIN socket, and you can use it for other device.

Connect OBP+ICP adapter.

Install the FEM/BDC interface board.

Connect 12V wire.

Connect 20PIN cable & OBP+ICP adapter.

Connect ACDP host.

Completed!

Now you can go on pre-processing BDC module on ACDP app.

www.obdexpress.co.uk