Honda Civic EL Nav 2.0 FB 2014 Generate and program smart remote with VVDI Key Tool Max + Mini OBD tool.
Plug Mini OBD tool to the OBD2 port of the car.
Turn on ignition on.
Generate Smart Remote with key Tool Max, and program with key Tool Max and Mini OBD tool.
Check working smart remote.
Read transponder, chip: 46 smart key.
Check frequency -> 433MHz FSK.
Generate with VVDI smart remote XSMQB1EN.
Vehicle remote -> Honda ->Civic -> Civic (old) keyless go ID46.
Tap “Generate remote”, it will take about 1 minute to finish.
Next is go to Mini OBD tool.
Select -> Connect Mini OBD Tool via Bluetooth.
Connect Mini OBD Tool to OBDII port, then connect.
Prepare all keys for programming.
IMMO programming -> Honda -> Civic -> Smart key system (2012+) -> Start execution.
Tap “Add a smart key”.
Turn off the ignition switch.
Turn on the ignition switch.
Key numbers : 3
Take all smart keys out of the car.
Put a programmed smart key inside the car.
Hear response sound and see LED on remote blinking…
Take all smart keys out of the car.
Put new smart key in the car. The LED light will blink on the key.
Turn off ignition.
Turn on ignition.
Turn off ignition.
Turn on ignition.
Whether the indicator light is out? tap “Yes”.
Turn off ignition.
Turn on ignition.
Turn off ignition.
Turn on ignition.
Key number: 4
Test remote ok.
Start ok.
Smart key registration completed.
Well done! VVDI Key Tool Max + Mini OBD program Honda Civic.
No comments:
Post a Comment