How to configure VXDIAG Benz C6?

 Here offer the how-to’s of configuring VXDIAG Benz C6 via ConfigAssist.

Go to vxdiag.net, download and install VX Manager.

Update all inside VX Manger.

Enter ConfigAssist and set for VCI.

 

Please be informed: if you have V2020.09 MB Star Software with Keygen, you can skip step 3. However, if you use the Xentry software by yourself, you need to do the steps of hardware configuration below.

Turn on ConfigAssist and choose“XENTRY Diagnosis VCI”.

Choose “Continue”.

Choose “Continue”again.

If StartKey doesn’t run, enter StartKey manually.

When StartKey is loaded successfully, choose “Apply and continue”.

Connect VCI, then choose “Apply and continue”

When Benz C6 configuration is finished, exit, then restart your computer.

MB Star Benz C6 done DPF Regeneration work perfect !

Surprisingly, VXDIAG MB Star Benz C6 (OEM) with Xentry 09/2019 software is able to do DPF Regeneration perfectly, which does a good job as well as one original machine, and wins one 1000usd OBD2 scan tool in the market.

How does DPF Regeneration work?
DPF Regeneration menu lets you perform the DPF cleaning to clear the blockage through
continuous burning of the particulates captured in the DPF filter. Which will avoid the filter being blocked by ash, then the owner has to replace the new diesel particulate filter (worth 1000usd -200usd)

How to use Benz C6 and Xenrtry 09/2019 to do DPF Regeneration?
With this machine, just follow the on-screen instruction to do, soon DPF regeneration will be completed. After complete, all the data will be low value in green color.


For your information, what I used is BEZN C6 OEM DOIP VCI + Xentry 09/2019 software, they are made by Allscanner VXDIAG Company.
I have no VXDIAG C6 MB Star C6, so I have no idea if it is working DPF too, although the Allscanner Engineer claim yes.

[caption id="attachment_23684" align="alignnone" width="640"] Images of BEZN C6 OEM DOIP VCI[/caption][caption id="attachment_23685" align="alignnone" width="675"] Images of BEZN C6 OEM DOIP VCI.[/caption]


Thanks
Source:http://blog.obdexpress.co.uk/2019/11/25/mb-star-benz-c6-done-dpf-regeneration/

For Doip Diagnose,which tool is the best?

All of the above Mercedes Benz diagnostic and programming tools are compatible with the DOIP protocol, DOIP SD C4 PLUS (SP100-E) is highly advised because it works with Mercedes 1989 -2019 (DAS & Xentry are also supported), engineering software i.e DTS Monaco & Vediamo are supported smoothly. What is the pros of other diagnostic tools (Benz C6, mb star c5, ECOM)? What the application scenarios for DolP? Go on reading.



DOIP SD C4 PLUS vs vxdiag Benz C6 vs sdconnect c5 vs BENZ ECOM

Product name	DOIP SD C4 PLUS	vxdiag Benz C6	sdconnect c5	BENZ ECOM
Item No.	SP100-E	SP332	SP311	SP335
Image
Manufacture	1:1 clone of the original	Allscanner Vxdiag
Mercedes Benz DOIP compatibility	Yes	Yes, with hard disk & dongle	Yes	Yes
DTS Monaco & Vediamo	Confirmed working, compatible with the official software.	Only support DTS Monaco, not Vediamo.	Unknown, need lucky.	Unknown, need lucky.
Diagnosis	Yes	Yes	Yes	Yes
Programming	Yes	Yes	Yes	Yes
Works with the old Mercedes	Yes, cover the Benz from 1989 to 2019. sdconnect c4 plus= sdconnect c4 + DOIP	Cover the Benz after 2000 year.	Cover the Benz after 2000 year.	Support xentry,not Das, cover the Benz after 2011 year.
Price	€ 394	€ 499	€ 963	€ 1,093

Attach one DOIP SD C4 PLUS PCB:


There are three application scenarios for DolP:
1. Inspection and maintenance of after-sales vehicles
In the repair shop, the external maintenance equipment does not need to use the traditional ALDL port hard-wire to connect, it will establish direct contact with the vehicle through the TCP/IP protocol, and send the reliable request to the vehicle DolP entity according to the order of instructions, and then the module then feeds back the vehicle's real-time error traceability information.
2. Product/factory mode vehicle ECU module refresh
The external refresh device establishes communication with the vehicle internal module IP network after performing security access and module unlocking according to the established refresh process steps through the Ethernet or TCP/IP protocol. The internal network of the vehicle should support the download and write operations of the OP and calibration files transmitted by the external refresh device.
In the product mode, engineering development tools often implement peer-to-peer communication and refresh of the device and module DoIP entities, but in the factory mode, the device is refreshed by the device to perform parallel refresh operations on the entire vehicle.
3. Inspection and repair in the factory mode final assembly inspection station
In the manufacturing process of the factory, the external testing equipment will perform the integrity test of the final inspection station for the vehicles connected to the IP network in the specified order. Different from the after-sales mode, in the factory, external test equipment usually connects and communicates with multiple Dol P entities of multiple modules of the whole vehicle.

How to connect and diagnose?
One single Mercedes vehicle and the external equipment use twisted pair point-to-point communication.
This approach means that the system is not subject to interference from other vehicles or equipment during IP diagnostics, usually use the IP for searching the address or automatic configuration.


Key
1     Ethernet cable
2     external test equipment
3     vehicle
4     logical connection

Connect one single Mercedes vehicle and one single external diagnostic device using wireless network
In this scenario, it means that there may be multiple vehicles or multiple devices in the wireless network. Therefore, both the car and the device should have a discriminating mechanism to identify the objects to be connected under the network and reject the requesting signal from the vehicle or equipment. Of course, both the device and the vehicle itself should have the ability to automatically access an existing IP network. Application scenario like repair shop:


One single device and multiple cars for wireless connection
In this scenario, only external test equipment requires point-to-many connection capabilities (sockets). For example, in a factory, a complete vehicle refresh server needs to refresh multiple vehicles at the same time.


Connect to multiple external devices in a single year, but only allow one channel to be established
The vehicle has the ability to connect to multiple devices, and it is necessary for the vehicle to have the ability to distinguish between diagnostic requests or feedback. For external devices, it is necessary to have the ability to determine whether the current vehicle is communicating with other devices. This can happen in factory mode where a device needs to refresh the module while in another network overlap, while another device needs to be serviced.


Last but not least, please remember DOIP SD C4 PLUS is the best one for DOIP diagnosis and programming at the cheap price.
Technical support from OBDexpress.co.uk 
 http://blog.obdexpress.co.uk/2019/08/08/doip-sd-c4-plus-vs-vxdiag-benz-c6-vs-sdconnect-c5-vs-benz-ecom/