Autel SFD Unlock, 2-Factor Authentication, Purchase, Renew Guide

 Autel SFD Security Gateway Unlock function has been released on 28th, Oct. 2024. Supports OEM-authorized SGW access, perform special functions/active tests, coding and adaptions for VW, Audi, Seat, VW CV, Bentley, Lamborghini, Skoda.

Now the function is available on Autel Maxisys Ultra/ MaxiCOM Ultra Lite, and will be upcoming on MaxiSys 906 Series/ 908 Series, MaxiDAS DS800 Series/ DS900 Series, MaxiCheck MX808 Series/ MX900 Series.

How to unlock Autel SFD?

Diagnostics >> Volkswagen >> Automatic selection >> OK >> Yes

Enter to identify car model, if the car needs SFD unlocking, this interface will pop up.

Vehicle Diagnostic Protection(SFD) unlock is required for the current model:

1. After selecting system under the "Control Unit" menu, perform unlocking via the "Security access" function.
2. Without unlocking, the adaptation, basic setting, coding and other function of some systems may fail.

Note:

You need to pass two-factor authentication before using online vehicle diagnostic protection(SFD) unlocking function. You can bind your identify authentication information and purchase unlocking rights here.

1. Press to link the identify authentication information.
2. Press to purchase the number of unlocks or validity period.

Autel ID needs to be linked with Google authenticator app.

Link >> Send

You’ll receive the binding process:

• Open your Autel ID email to copy the 16-digit code.
• Open the Google authenticator app, enter your Autel ID and 16-digit code.

Your Autel ID has been successfully added.

Go back to the SFD unlock interface, press "Continue".

Here whichever specific module you’re entering, you’ll be asked to unlock SFD. Let’s entering "Engine Control Unit 1" as an example.

Engine Control Unit 1 >> Security access(login)

Here you can see the lock status of the module.

Unlock using Autel SFD service:

Online unlock SFD >> Continue >> Authenticate

*Google Authenticator App is required for verification when unlocking.

Enter the 6-digit number in Autenticator

Please ensure the Network is in good condition.

SFD unlocked successfully, each unlock is valid for 90 minutes.

How to access Two-Factor Authentication?

Diagnostics >> Identify car model >> Continue >> Control unit >> Engine control module 1 >> Security access(login) >> Online unlock SFD >> Continue >> Authenticate >> Enter the 6-digit code

How to online purchase SFD Unlock?

Diagnostics >> Identify car model >> Continue >> Control unit >> Engine control module 1 >> Security access(login) >> Online unlock SFD >> Purchase >> OK

Here you can purchase by Credit Card or Paypal.

How to renew SFD subscription?

If VAG(VW Auto Group) security gateway function has been purchased before, here’s guiding to renew the subscription.

OEM Authorization >> Volkswagen >> Renew >> OK

Here you can purchase by Credit Card or Paypal.

www.obdexpress.co.uk

OBDSTAR X300 Classic G3 Program Benz 2011 W207 EIS AKL on Bench

 This post comes with a new guide about Mercedes-Benz 2011 W207 EIS all keys lost programming with OBDSTAR X300 Classic G3 on Bench. Prepare all tools required and update the software to the latest version (Benz V40.56 or later). Check more info below.

Required Tools:

MP001 Programmer

BENCH- A V3 Clone Jumper

OBDSTAR BENZ FBS3 Kit (C4–04, C4–05)

OBDSTAR X300 Classic G3 Key Programmer

Main Cable

12V Power Supply

Mercedes-Benz W207 EIS

Blank BE Key

Menu Function Path:

Select IMMO >> BENZ >> BENZ V40.56>> Manual Select Chassis >> Program Keys (FBS3) >> By Bench >> Guide

We can follow the diagram to identify the EIS type

Select W207 >> All Keys Lost >> Guide

Main operation steps:

Step1: Read PinCode

Step2: Generate BE Key File

Step 3: Reset Virgin BE Key Data
Step 4: Read Key Info

Step 5: Write BE Key Data

Step 6: Examine Car Key

Step1: Read PinCode

Click "Pinout" to check the EIS Pinout

EIS ToolA-Pin 712V (11)A-Pin 10GND (4+5)A-Pin 5K (15)A-Pin 1CAN L (14)A-Pin 2CAN H (6)

Select PinCode Collection >> OK

Please connect the C4–05 module and the diagnostic tool to the OBDSTAR MP001 programmer, and supply the MP001 programmer with an external power (12V).

Click "Help" and follow the device prompts to connect the C4–05 and the diagnostic tool to the MP001 programmer.

Click "Yes".

Note:

1. This function requires Internet access, please keep the network connection throughout the process.
2. Please follow the instructions strictly and do not disconnect in the middle of the process.

Please confirm that the EIS has been disconnected from the ELV, and then tap the button "OK".

Please insert the infrared key simulator C4–05 (for Mercedes-Benz) into the EIS. If it has been inserted, please pull it out first and then reinsert it.

Wait for the system to collect data. The device will automatically parse out the PinCode of the key.

Read the PinCode successfully

Restore any parts that were removed from the vehicle!

Step 2: Generate BE Key File

Select Method 1 (Read EIS IMMO Data) >> OK

Pay attention to the prompt and check the wiring diagram, and remove the C4–05 cable.

Click Yes >> Generate Key File >> Selected key position: Key1

For all keys lost programming, we can select any one of the key positions.

Generate Key file successfully

Step 3: Reset Virgin BE Key Data

Please connect the C4–04 module and the diagnostic tool to the MP001 programmer, and supply the MP001 programmer with an external power (12V).

Tap "Help" to view the wiring diagram.

We need to connect an additional C4–04 board.

Please insert the key into the infrared keyhole of the C4–04 module, and then tap the button "OK".

Confirm to reset virgin the key

Reset key virgin successfully

Step 4: Read Key Info

Click Yes >> OK

The key still needs to be inserted into the infrared keyhole of the C4–04.

This indicates the key has been reset virgin successfully.

Step 5: Write BE Key Data

Click Yes >> OK

Follow the prompts to place the Mercedes-Benz key into the infrared keyhole of the C4–04

Select the key file just generated

Confirm to write the key file

Write the key file successfully!

Step 6: Examine Car Key

Click Yes >> OK

Please insert the ignition key into the EIS.

Please remove the ignition key from the EIS, then insert it into the EIS and tap the button "OK".

Please insert the key into the infrared keyhole of the C4–04 module, and then tap the button "OK".

This key is the ignition key for this vehicle.

Program the key was successfully

Verify by inserting the key into the EIS and turning it to ensure it works properly.

The newly added key may have normal remote functionality but be unable to start the vehicle. Please disable then enable the newly added key position and check whether the ELV is normal before tying again.

Done!

Read also:

http://blog.obdexpress.co.uk/2024/10/23/how-to-program-mercedes-benz-fbs3-be-key-by-obdstar-x300-classic-g3/

www.obdexpress.co.uk

Xhorse Condor XC002 PRO Highlight, Parameter, Feature Instruction

 XHORSE Condor XC002 PRO Key Cutting Machine comes with a brand-new design that supports probes & cutter switching quickly without a Ailan wranch. The optimized performance, which can bring ultra-high precision duplication.

Highlight

• Probes & Cutters Switching Quickly
• Central Clamping
• Internal Cut/External Cut/Dimple Key
• 0–45°Rotatable Clamp
• High-Speed Motor
• All-aluminum Body
• Calibrating Light
• Micro-adjust Guide

Support Type

Double sided key, 4 track external, 4 track internal, single sided key, 2 track external, channel track, dimple.

Parameters

Features

• Upgraded Solution

The Condor XC002 PRO lock switch can achieve probes and cutters switching quickly and central clamping of the probe and cutter easily with no need for an Allen wrench, bringing a seamless and efficient working experience.

• Reliable Mechanical Structure

Condor XC002 PRO is manufactured with reliable mechanical components, ensuring ultra-high precision duplication.

Its Korean-made retainer cage greatly maintains a good running status; its British Renishaw online testing system spots flawless key cutting locations; covered with specialized coating, the cutter made of Japanese raw materials guarantees a long service life.

• Masterful Craftsmanship

At the bottom of the machine, the storage box thoughtfully designed helps users store probes, cutters and key blades.

The machine body forged by the all-aluminum die casting process(thermal treatment) ensures greater stability.

All the main components processed by the German-made DMG CNC machine guarantee high-precision duplicating results.

• Multiple Option Available

Multiple gears allow users to adjust the spindle speed in accordance with their needs to elevate efficiency and prolong its service life.

Standard mode and dimple mode are added to facilitate dimple key and ordinary key cutting.

• Ergonomic Design

Every detail you care about is addressed with these thoughtful design.

Based on deep research on users’ operation habit, Condor XC002 PRO has been greatly optimized regarding its materials, handle radian, grip, touch, touch, control, and cutting operation.

With built-in indicator light, you can level the probe and the cutter at ease. An intelligent LCD screen displays the spindle speed for your convenience.

• Innovative Multi-function Clamp

The multi-function clamp equipped allows for cutting dimple keys of different angles(0–45°). Users can adjust the angle of clamp to finish cutting based on the original key. Currently, Condor XC002 PRO supports duplicating standard single sided, double sided, 4 track external, 2 track external, 4 track internal, channel track and dimple keys with angles.

• Lifelong Free Technical Support

With "Customer Service" on Xhorse APP, you’ll get live and free technical support from a professional and dedicated team to help you tackle any problems.

• Worry-free Warranty

A one-year(365 days) warranty is offered from the data you purchased the product.

Other Accessories

• 5mm/2.0mm/2.5mm cutter, high strength tungsten steel with special coating, sturdy and durable.
• Probe, apply to the automatic calibration and automatic measurement.
• Power cable.

www.obdexpress.co.uk