Autel MaxiIM KM100 Key Programmer can support to program 2003–2022 Nissan Murano all keys lost by OBD. Besides, it also supports add key, read password & remote learning. Here's programming for a 2009 Nissan Murano as an example.
I've got the code already from Nissan, so I can cut it directly with Xhorse Dolphin XP005 key cutting machine. Let's test the key, it can switch and open the car door.
The key has been generated, let's program it.
It has 2 functions by the button or by inserting the key. This car uses a semi-smart key, you have to insert it and then press the button.
Connect Autel KM100 to OBD via VCI
IMMO >> Nissan >> Manual selection >> North America >> Murano >> 2009 >> Yes >> Hot function
Smart key learning(guided) >> Start
Execution of this function will erase all learned keys of the vehicle.
Prepare all keys of the vehicle. At most 4 keys can be learned.
Press "Yes" to continue.
Remove the battery from the smart key, and then insert the smart key into the key slot to verify if it can start the vehicle in an emergency, so as to ensure that the key slot is OK.
Insert the smart key into the card slot and turn on the ignition.
Remove the smart key from the key slot(The instrument cluster will automatically go off).
Insert the smart key to be learned into the key slot and turn on the ignition.
Does the security indicator in the dashboard flash 5 times? Yes.
Program success.
Press "No" to complete.
Remove the smart key from the key slot(The instrument cluster will automatically go off).
Insert a learned smart key into the key slot, turn on the ignition and wait for 3s.
Remove the smart key from the key slot(The instrument cluster will automatically go off).
Leaning completed.
Check if every key can start the vehicle.
As it's a semi-smart key, the car will not start unless you put the key into the slot.
All buttons work well. And the car can start perfectly.
Done.
No comments:
Post a Comment