Yanhua Mini ACDP Correct VW/ Audi 0DE Gearbox Mileage

 Can Yanhua Mini ACDP supports to do VW/Audi gearbox mileage correction? The answer is yes. Only to have A605 License, by working with ACDP Module 13 or Module 21 to easily realize. Supports VW/Audi DQ200(0AM/0CM), DQ250(02E/0D9), DL382(0CK), VL381(0AW) mileage adjustment.

How to correct VW/Audi gearbox mileage?

Connect ACDP programmer to vehicle OBD port.

Mini ACDP>> VW >> Gearbox mileage correction >> Audi >> Detect module info

Connect ACDP with gearbox, click "OK".

Check gearbox info, it's DQ380(0DE).

Required Tools:

ACDP Programmer

SH725XX-0DE interface board

DB15LAN adapter

TCU cable

Connect the interface board.

Pull DB15LAN adapter's button to the CAN-R side.

Connect the power charge & vehicle gearbox.

DQ380(0DE) >> Mileage correction(auto mode) >> Continue

Check system info, original mileage:13608km

Click "Continue".

Save EEPROM data.

Enter new mileage: 6767km

Click "OK".

Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Click "Continue".

Correct mileage finish.

How to correct system run time?

Time correction(auto mode) >> Continue

Check system info, system run time: 6666 hours.

Click "Continue".

Save EEPROM data.

Enter new run time: 1206hours

OK >> Continue

Correct time finish.

Check the correction info.

Identify >> Continue

System info have been changed:

Mileage: 6767km, system run time: 1206hours.

Done.

This is how to do VW/Audi gearbox odometer correction with Yanhua ACDP.

www.obdexpress.co.uk