This is a guide to show how to use Audi BCM2 Solder-free Adapter working with Xhorse VVDI Key Tool Plus Pad.
Operating Steps
⦁ How to connect BCM2 Solder-free Adapter?
Follow the
path on VVDI Key Tool Plus:
Immo programming >> Audi >> Select by
type >> Fifth immobilizer system >> Start programming >> Read
BCM2 data >> Prog read - encrypted bcm2 >> OK
Note: make sure the Internet connection is good.
Select the properly option according to BCM2 version on module.
Adapter method >> Connection diagram
Here you can check how to
connect BCM2 Adapter with Key Tool Plus via cable.
Step1 - Identify module information >> OK
Here you can zoom in the diagram to locate D1, D2 and GND.
1. Install
positioning pin.
2. Find the positions of D1, D2 and GND, clip adapter onto
module in contact with the 3 spots.
3. Connect Adapter & Key Tool Plus
via cable.
4. Plug in 12V power supply.
Note: DO NOT move module, cable or
power supply during process
⦁ Read Data
Read >> Continue >> Rename, OK >> OK
Read
& save data successfully.
Step2 - Read immo data >> Yes >> Yes >> OK >> Read >> Continue >> Rename, OK >> OK >> Save here >> OK
⦁ Write Data
In immo5 system, BCM2 data can make dealer key and learn
key!
OK >> OK >> Write >> Continue >> OK
Write
data successfully.
Now you’re ready to make a Audi
754J Dealer Key, supports A4L, A5, Q5, A6L, A7, A8 2013-2019 vehicles. More
details please refer to
FAQ: Xhorse BCM2 Solder-Free Adapter for Audi Add Key
& All Key Lost
http://blog.xhorsestore.co.uk/xhorse-adapters-and-parts/faq-xhorse-bcm2-solder-free-adapter-for-audi-add-key-all-key-lost/
No comments:
Post a Comment