(Solve) Scania SDP3 V2.40.1 “can’t find any valid key”

Installed Scania SDP3 V2.40.1 with VCI3 scanner by following the video demo, but had error message "Could not find a valid key. To run SDP3 with limited functionality, select the No Key option. For fault locator or demo mode, it is necessary to have „- 3 valid software key installed. Select the key Software option; _Dicate a USB key and select the USB key option."

obdexpress.co.uk engineer solution:

1. Possible reason:

No installed the patch
No Crack

2. How to crack SDP3 2.40.1:

Right click on "Prerequisites" and select "Run as administrator".

Restart the computer.

Right click on "Computer" and choose "Properties" to view the computer system is 32bit or 64bit.
Back to open Computer -> Local Disk(D:) -> KeyGenandFIX->X32 -> install.




SDP3 2.40.1 activation service:
Open "Hardware ID reader".
Copy "SDP3 HWID reader X86(public)", send the ID to the dealer to active.
After the dealer helps register, right click on "Registry Editor" and select "Merge", then "Yes".





Open Local Disk(D:)->KeyGenandFix -> Fix File 2.40.1.
Copy the .dat and .dll files.
Right click on "SDP3" on the desktop, then "Properties", then "Open File location", then "Paste" (Paste the above two.dat and .dll files to replace the existing ones).



Open Local Disk(D:)->KeyGenandFix.
Open "Time" and click on "Crack", then succeed.


Restart the computer.

Watch video:


Time 1:38 to 4:18 is on how to crack sdp3 2.40.1 software for the VCI3 scanner.

Good luck


Source:http://blog.obdexpress.co.uk/2019/12/18/scania-sdp3-v2-40-1-cant-find-any-valid-key-solution/