How to Register and Activate FCA SGW License by LAUNCH X431?

 If your IP address is in Europe or any other region (excluding the United States, Mexico, and Canada), you can purchase the corresponding FCA SGW license for your Launch X431 tablet (7 inch or larger) on the Launch Mall.

After that, you will need to register and activate your license. Follow this guide to complete the process step by step.

Kindly notice:

1.For users in European region:

Purchase SGW Function License (European region only)- US$1151

2.For users in Non-European/Non- North America (US/Canada/Mexico) region:

Method 1: purchase SGW function license (Non-European region only) — US$899

Method 2: purchase FCA SGW alone- US$329

Purchase path:

Mall-> Other Goods-> SGW Function License (European region only) or SGW Function License (Non-European region only) or FCA SGW

Compatible devices:

Launch X431 PAD IX (9)

Launch X431 PAD VII Elite

Launch X431 PAD V Elite

Launch X431 Pro5 Smartlink

Launch X431 PRO3S+ Elite

Launch X431 PRO3 V+ Elite

Launch CRP919EBT/CRP919XBT

Launch X431 PRO series

How to register FCA SGW License?

To begin the activation process, complete your registration as follows:
- Visit www.launcheurope.de/sgw_login and click Register.

- Alternatively, on your Launch X431 diagnostic tool, navigate:
More > Licenses > Use Software Card > SGW User Authentication > Register.

- Fill in the registration form. Your details will be reviewed individually. You may proceed with activation while waiting for review.

For successful verification:
- Take a photo of your ID together with your diagnostic device.
- Upload this image.
- Avoid A4-sized scans, as excessive background can make the ID unreadable.

Correct example:

Wrong example:

How to activate FCA SGW License?

Due to recent system updates, activation methods vary based on your license key:

Case 1: License keys starting with FCA, MESGW, SGWP, POAL, or POAT
- On your Launch X431 diagnostic app’s home screen, go to:
More > Licenses > Use Software Card > SGW User Authentication and log in.
- In the menu, select Security Gateway Activation Form, fill it out, and submit.
- Check your request status under Status Inquiry.

Case 2: Other License Keys
- Go to More > Licenses > Use Software Card.
- Enter your license key directly and tap Confirm.
- If an error message about SGW User Authentication appears, your account may not be verified, or there was a verification issue. You will receive an email notification in such cases.

Additional Information

- Relevant data terms: SGWP Login, PARTICLE.
- Always ensure your Launch X431 tool and software are updated to avoid activation issues.

www.obdexpress.co.uk

Autel IM608 Pro Guide: Catch System Log for Troubleshooting

 One customer gave feedback that he encountered some network issues while using the Autel MaxiIM IM608 PRO diagnostic tool.

Solution from OBDExpress.co.uk Engineer:

If you experience software crashes, network errors, or other application-related issues, you can capture system logs directly from your device and send them to Autel’s technical team for analysis. This helps their engineers identify the root cause of the problem.

Here’s how to capture and upload system logs using your Autel IM608 Pro:

Step-by-Step Guide:

1.Return to the Main Menu

If a function fails or the app crashes, navigate back to the home screen of your IM608 Pro.

2.Open MaxiTools

Select the MaxiTools application icon to open the utility menu.

3.Start Log Collection

Choose the Log option.

Tap Start to begin recording system logs related to the malfunction.

The tool will now collect diagnostic data. Please wait until the process completes.

4.Upload the Logs

Once log collection is finished, select Upload to send the data directly to Autel’s server.

Wait for the upload to complete. Do not turn off the device during this process.

5.Provide Your Device Serial Number

For further assistance, make sure to have your IM608 Pro serial number ready. Share it with Autel support to help them track your log submission.

This method also applies to the Autel IM608 II and other Autel IM608 series diagnostic tools.

www.obdexpress.co.uk

Lonsdor K518 Adds 2014 BMW 5 Series Smart Key OBD Tutorial

 Today we’re gonna use the Lonsdor K518 Pro Key Programmer to program 2014 BMW 5 series smart key by OBD. Following is the operation tutorial step-by-step.

What Should Prepare?

Lonsdor K518

OBD Communication Cable

An Original Car Key

A New Smart Key

Plug in the OBD communication cable.

Procedure

Step1. Read Key Data

Immo & Remote >> BMW >> Select from type >> CAS4/CAS4+ >> Method 2(OBD) >> Read key data

This function can read CAS and key data, and check if the current vehicle needs to do pre-processing. Click OK to continue.

Turn ignition ON.

Click OK.

It says: Need to preprocess the current vehicle!

Step2. Pre-process CAS4

Pre-process CAS4 >> OK

Follow the prompts to click OK.

Turn ignition ON.

Preprocessing… do not touch any button of the vehicle.

CAS4/CAS4+ proprecess completed, you can generate dealer key or reset mileage via OBD.

Let’s read key information again.

It now says: No need to preprocess current vehicle!

Step3. Make Dealer Key

Click "Making dealer key".

This function can turn new key to dealer key, which can be used to do "program key" operation, click OK to continue.

Please turn ignition on and Hazard warning lights.

Select blank key: Key3 >> Key slot generation >> Have original key

Please put a working key close to the induction coil.

Click OK.

Put the key to be generated in the K518 device’s cards slot.

Generate and lock ignition key success.

Please do follow:

1. Except newly generated key, take all the other keys out of car.
2. Close newly generated key to car induction coil.
3. Click start button and wait for 15s(wait 15s to move key even when dashboard is lit up).
4. Check if all functions of new key are normal.

Generate successfully.

After proprecess or adding key is complete, please try to start car first.

Now let’s try it.

Both the new key and original key can start the car successfully.

Remote control is normal, too.

Done.

www.obdexpress.co.uk

How to Detect Frequency and Learn Remotes Model by CGDI K2?

 This post introduces how to use CGDI K2 Smart Key Tool to detect frequency and learn remotes model.

1.Detect Frequency

Click [Frequency Detection] to learn the frequency of a remote. Just press one of buttons on the remote.

2.Compare Data

[Data comparison] can learn the model of frequency and compare the data between two buttons.

Click [Start detection]

Press the first button on the remote. Then you can get its model

Press the first button again, then you can get the data

Press the second button to compare data

The different buttons always have different data, it’s normal.

Done!

That’s all process to detect frequency and learn remotes model using CGDI K2.

www.obdexpress.co.uk

Xhorse VVDI2 V7.5.0 Device Connection Failure Solution

 Several users have encountered critical connectivity problems after installing the Xhorse VVDI2 software version 7.5.0. This post details the known issues and provides the official fix from Xhorse.

Identified Problems with V7.5.0
1. Device Connection Failure
After updating to V7.5.0, VVDI2 programmer fails to connect to the software
Software displays "Device not found" error, even though:
-The device powers on normally
-The Xhorse Upgrade Tool Kit recognizes the hardware
-USB drivers are properly installed
2. Version Compatibility Issues
Some installations incorrectly show:
-Software version: V7.3.7 (older version)
-Despite downloading and installing V7.5.0
Attempting to downgrade to V7.3.7 does not resolve the connection problem
3. Complete Functionality Loss
-Affected units cannot perform any operations
-All vehicle brands show connection errors
-Both key programming and diagnostic functions are unavailable

Official Solution: Update to V7.5.1
Xhorse has released V7.5.1 specifically to address these critical bugs. Follow these steps carefully:
Step-by-Step Fix Procedure
1.Complete Uninstallation
Fully remove all existing VVDI2 software (V7.5.0 and older)
Use Windows "Add or Remove Programs" feature
Delete any remaining VVDI2 folders in Program Files
2.Clean Installation of V7.5.1
Download the official update:
VVDI2 V7.5.1
Disable antivirus software temporarily during installation
Run installer as Administrator
3.Firmware Update
Open Xhorse Upgrade Tool Kit
Connect VVDI2 via USB
Follow prompts to update device firmware
Do not disconnect during the process
4.Final Verification
Restart your computer
Launch VVDI2 software (V7.5.1)
Confirm successful device connection
Test basic functions before professional use
www.obdexpress.co.uk

APPRO2 Review: The Best Key Programmer for BMW & Audi?

As a professional automotive locksmith, I’ve tested nearly every key programming tool on the market — including XHORSE, CGDI and similar devices. But after months of daily use, APP2 APPRO2 has become my go-to solution. Here’s why.

Real-World Performance: Where APPRO2 Shines

- "It Just Works" Reliability

One of the biggest frustrations with some programmers is unstable functions or bricked modules. With APPRO2, I’ve noticed:
Fewer "failed read/write" errors compared to other tools;
No random chip locks — a huge relief when working on expensive BMW or Audi modules;
Faster response time when pulling data (especially on VW, Mercedes, and Toyota RH850 chips).

- BMW Repairs Made Easier

Most tools can read BMW anti-theft data, but APPRO2 lets you fix problems — not just diagnose them.

• CAS4 OBD Recovery — Saved me multiple times when:
• A customer lost their remote control codes
• A used instrument cluster had missing key data
• A CAS module needed password recovery
• G-Chassis BDC Support — APPRO2 had this weeks before competitors, letting me service newer BMWs without waiting for updates.
• No Module Removal Needed — The F/G-Chassis OBD repair function is a massive time-saver. No more dismantling dashboards just to fix a mileage mismatch!

- Safety Features That Actually Help

Some tools don’t warn you before a risky operation — APPRO2 does.

A17 Wiring Harness — No more guessing if the connections are right. The tool auto-detects wiring and prevents mistakes.
Clear Error Messages — Instead of vague "Error 05" prompts, it tells you exactly what went wrong (wrong voltage, bad connection, etc.).

Where APPRO2 Could Improve

No tool is perfect — here’s what I’d like to see in future updates:
More Asian Car Coverage: While great for European models, some Korean/Japanese cars still need extra steps.

Final Thoughts: Who Should Buy APPRO2?

Professional locksmiths who need reliable, no-nonsense performance
BMW/Audi specialists who want advanced repair functions
Technicians who hate "bricked module" surprises

If you’re tired of glitchy tools and want a stable, feature-packed programmer, APPRO2 is worth every penny.

Rating: 4.5 / 5
(Docked half a star for price, but the performance justifies it.)

Read also:

APPRO2 Supported List: Key Programming & Mileage Correction

http://blog.obdexpress.co.uk/2025/07/03/appro2-supported-list-key-programming-mileage-correction/

www.obdexpress.co.uk

How to Bind OBDSTAR Tool to OBDSTAR APP? (New)

 Today we’ll walk through the guide about how to bind OBDSTAR tablet series with OBDSTAR App, creating a powerful connection between your Repair Information software and smartphone.

Binding guide applies to all OBDSTAR tablet series as follows

• IMMO: X300 Classic G3, X300 DP PLUS, X300 PRO4, X300 MINI Series…
• Motorcycle/E-Moto: MS80, MOTOMASTER, MS70, MS50, MK70, ISCAN Series (iScan DUCATI/BENELLI/URAL/HONDA/KAWASAKI/YAMAHA/Harley/BMW/ KTM/HUSQVARNA/ MV Agusta/JAPAN)
• Marine: D800, D700, ISCAN Marine Series…
• Dash/Airbag/ECU/Radio: ODO MASTER, P50, DC706, MT200
• Test Platform: MT501, MT502, MT101, MT102

Step-by-Step Binding Guide

Step 1: Update Software

Ensure both the Repair Information software (on your OBDSTAR tablet) and the OBDSTAR App (on your phone) are updated to the latest versions.

Step 2: Bind Your Device

• On OBDSTAR Tablet:

Navigate to VCI Info → Device QR Code.

• On Mobile App:

Go to Me → My Device → Device Binding, then allow camera access.

• Scan QR Code:

Use your phone to scan the QR code displayed on the tablet.

Confirm device details and tap "TO BIND".

Success:

A "Bind Successfully" message will appear.

Step 3: Access Interactive Wiring Diagrams

• On Smartphone:

Tap the motorcycle icon (or relevant vehicle type).

Select Interactive Wiring Diagram → Model (e.g., BAODIAO YESON).

View/zoom into the full wiring diagram list.

• On OBDSTAR Tablet:

Open Repair Information and scan the login QR code with the OBDSTAR App.

After login, navigate to:

Bosch EPM 44 (2017–2018) → BAJAJ Dominar 400 → Interactive Wiring Diagram.

www.obdexpress.co.uk