Autel IM608 PRO2 + GODIAG GT114 Test Audi A6 Dashboard

 Here we’re gonna use Autel MaxiIM IM608 II + GODIAG GT114 to test 2004–2011 Audi A6 Dashboard on bench. With GODIAG, we can detect the key match status during diagnostics, or check if the key works when it’s done.

• Detect Key Status

Connect IM608 PRO II, GT114 and Audi Dashboard.

• The dash indication means that the key is not recognized.
• The light of GODIAG Key Idenfifier flashes for a long time indcating that the chip key and the vehicle’s IMMO system do not matched. The chip key needs to be re-matched.

IMMO >> Accept >> Audi >> Manual selection >> A6 >> 2004–2011 >> OK >> Immo status scan >> Faults

Here we can check all the DTCs, and follow the instructions to repair vehicle.

• Test If The Key Is Generated Successfully

Put the chip into GODIAG Key Idenfifier. And turn ignition on.

• The dash indication means that the key is recognized.
• The light of GODIAG Key Identifier flashes and then goes out indicating that the IMMO chip and the chip key are working property.

• Test The Key Is Work Or Not
• The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
• The light of the key identifier flashes for a long time indicating that the chip key and the vehicle’s IMMO system do not match, and the chip key needs to be re-matched.
• The light of the key identifier does not flash which means that the vehicle’s IMMO system is faulty. Please check the vehicle’s IMMO system.

www.obdexpress.co.uk