Tuesday, 31 October 2023

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus/ Elite

 Confirmed! Launch X431 IMMO Plus/IMMO Elite with IMMO function can perform anti-theft smart key matching for Peugeot 408 all keys lost perfectly.

Here is the operation process:

Make sure the connection between device and vehicle is correct.

Select IMMO>> Peugeot V10.22>> Peugeot

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Step 1: Read anti-theft key password

Select Anti-theft Key Password Reading>> Automatic scan

Read out the password successfully

Write it download to use later

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Step 2: Match anti-theft key

Select "Anti-theft Key Matching"

Read out the VIN and car model

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Select "Automatic scan"

Identify the VIN, mode, car model and system

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Select "Smart key system"

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Press the double-flash switch

All keys will be cleared after this function is performed.

Re-matching is required to use the keys. To perform the function, get all keys ready.

Enter the confidential code

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

The password is correct.

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Enter the key number (i.e. 2)

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Insert the smart key to be matched into the smart key card slot

Note: If you have the original car key, you must match the original car key, you must match the original car key before matching the new key. Otherwise, the new key may lack the remote control and intelligent functions.

Click OK when the operation is completed.

Matching succeed. Take out the smart key, and insert the next smart key.

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Now the key matched is 2.

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

Start the car after each smart card is operated as follow:

Insert the smart card into the slot, turn on the ignition and wait for 3s before turning off it, and take out the smart card and press the lock key for 5 seconds.

Peugeot 408 all keys lost anti-theft key matching is completed with X-431 IMMO Plus/Elite .

Peugeot 408 All Keys Lost Programming with Launch X431 IMMO Plus Elite

www.obdexpress.co.uk


Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

 GODIAG ECU GPT Boot Adapter is a new professional adapter to work with J2534 devices and PCMFLash software for ECU data reading and writing without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. It is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Here take Mazda 3 ECU as an example to check how it works with SM2 Pro and Godiag GT100+.

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

1.Connection

Mazda 3 ECU Pinout diagram

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Connect Godiag ECU GPT Boot AD and Mazda 3 ECU according to the diagram

Plug Godiag ECU GPT Boot AD into Godiag GT100+ OBD2 Breakout Box

Connect GT100+ and SM2 Pro

Connect SM2 Pro to a computer via USB cable

Plug PCMTuner Dongle into computer

Supply power to Godiag GT100+, and press the power button

Press the "MNL" button and "120 ohm resistor" button on Godiag ECU GPT Boot Adapter

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

2.Run Pcmflash software to operate

Open pcmflash software

Select the corresponding options below

Interface: J2534: Scanmatik- SM2 USB

ECU model: [09] Mazda: 2.0L, 2.3L, 2.5L LF/L3/L5 (Mazda 3/5/CX7 2010+)

Click "Identification"

Identify the ECU successfully

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Click "Read DTC"

Read DTC successfully as well

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Click "Read" to read ECU data

It will show the current battery voltage and tell you turn off all electrical load and turn ignition on.

Click "OK" to continue

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Read the ECU data successfully

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Then save the data file

Godiag ECU GPT Boot Adapter and SM2 Pro Read Mazda 3 ECU

Kindly notice:

Godiag ECU GPT Boot AD ECU Connector read/write ECU with J2534 devices:

  • Only Scanmatik 2 PRO for PCMflash allows you to form GPT1, GPT2 signals necessary to work with Module 71.
  • Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

In addition, Godiag ECU GPT Boot AD Programming Adapter also can work with standard OBD2 protocol equipment to perform diagnostic function.

For more info, check https://www.obdexpress.co.uk/wholesale/godiag-ecu-gpt-boot-ad-ecu-connector.html

www.obdexpress.co.uk


Autel IM508S + VVDI Key Tool Max Add 2020 Toyota Camry Key

 Today I'm gonna try Xhorse VVDI Key Tool Max PRO + Autel MaxiIM IM508S to add a 2019–2020 Toyota Camry smart key via OBD. Prepare a working key and a new key, just 2 steps in need.

Generate Remote

Put the new key into Key Tool Max PRO slot.

IMMO programming>> Toyota >> 2230(A9) 434.42/433.58 >> Generate remote

Programming success.

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Add Key

Plug Autel IM508II connector into OBD.

IMMO >> Toyota >> system selection >> Keyless system >> Keyless system(CAN) >> Add smart key

Do you want to use the simulator key APB112? No

Notice:

Each step must be completed within the specified time.

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

The positions for learning include: 6

Put the working key close to the START button.

Put the new smart key close to the START button.

Please wait…

Learning succeeded.

Test the new key, it can normally start the car.

And its remote work well.

Done.

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

Autel IM508S and VVDI Key Tool Max Add 2020 Toyota Camry Key

www.obdexpress.co.uk

Tuesday, 24 October 2023

Lonsdor K518 Pro vs. K518ISE/ K518S: What's New?

 Lonsdor K518 Pro is coming soon! It's the 2nd generation versatile key programming device of K518. The device hardware and software are improved by Lonsdor. It's faster and more convenient for technicians and locksmiths.

Lonsdor K518 Pro vs. K518ISE, K518S

What is new in K518 Pro?

1.Hardware configuration

  • Android 9+ 4 core 1.8GHz+ 1280*800 display+ 5800mAh battery+ Ram 2G flash 8G memory

Based on Android 9, more optimized operation;

With Quad-core A7, the strongest computing power, 2 or 3 times faster than K518ISE/K518S;

Excellent and powerful ultra-high energy consumption ratio;

  • Comes with Lonsdor Super ADP 8A/4A Adapter, the first to support 8A (H chip) generation;
  • Also comes with other extension accessories for Nissan, Dodge and Maserati, etc;
  • Has built-in LKE, no need to buy an extra simulator key;
  • OBDII cable has self-test and lighting functions. The OBD connector's light can be switched on/off with the button in the upper right corner of the main page on the tablet.

Lonsdor K518 Pro vs. K518ISE, K518S

2.Function

  • Added CANFD and DoIP protocols;
  • Supports data/file transfer via Bluetooth, it's more convenient and faster for customers;
  • Optimizes the built-in antenna, it's better and more stable to use WiFi;
  • Supports long-distance frequency detection and frequency reading (RFID);
  • Supports 24V lorry and heavy trucks;
  • Supports mileage correction by EEPROM.

For details, check the comparison table below.

Lonsdor K518 Pro vs. K518ISE, K518S

Lonsdor K518 Pro Full Version Universal Key Programmer:

https://www.obdexpress.co.uk/wholesale/lonsdor-k518-pro-key-programmer.html

www.obdexpress.co.uk


Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

 How to do SAS(Steering Angle Sensor) calibration for 2019 Mitsubishi Triton with Launch X431 scanner? Read this article to learn the procedure. The function is available on most X431 diagnostic tool like Launch X431 PAD 7, X431 PRO5, etc.

Local diagnose >> Mitsubishi >> Latest version >> Other >> Triton >> L200 >> STRADA(KJ#, KK#, KL#, KP#) >> 2019 >> System Scan >> DTC(s) U1100: engine CAN timeout >> Enter >> Read data stream >> Steering Angle >> OK

Turn the steering, make sure it's working.

Here we can see the steering angle value changes.

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Exit to click "Read Data Stream" again.

Sensor calibration >> SAS calibration

Are yo sure to perform this function? Yes

Click "Perform".

The selected command will be executed.

Are you sure? Yes.

Caution: please check execution conditions.

Successful operation.

The steering angel value has been changed to 1.000.

Done.

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

Launch X431 Calibrate 2019 Mitsubishi Triton Steering Angle Sensor

www.obdexpress.co.uk

How to Read Write Ford SONY TMS470 Radio Code & EEPROM with OBDSTAR DC706?

 OBDSTAR DC706 ECU Tool with BODY/CHASSIS/OTHER V30.15 can read/write EEPROM, and read/change/off code for Ford SONY TMS470 Radio via OBD and Bench.

Preparation:

Ford SONY TMS470 Radio

OBDSTAR P004 ECU Clone Jumper

OBDSTAR P004 Adapter

Main Cable

OBDSTAR DC706 Tablet

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Important!

Keep DC706 charging and communicating during the process, also ensure the internet connection is normal.

Menu path:

Select ECU Flasher>> All>> BODY/CHASSIS/OTHER>> BODY/CHASSIS/OTHER V30.15>> BRAND FORD>> MODULE RADIO

Quickly search for the corresponding radio model- Ford RADIO VISTEON SONY TMS470 (OBD/BENCH)

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Operation steps:

Click [Guide] and [Pinout] to check the related operation instruction and wiring diagram separately

Connect P004 Adapter to the Ford radio via the P004 ECU Clone Jumper, and connect P004 Adapter to DC706 via the main cable

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

After connection, click [Start] and select [Bench] mode

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Switch on OBDSTAR P004 Adapter

Click [Code Read] to read code successfully. It's 1234.

Reboot P004 Adapter, and enter the pincode 1234 on Radio to verification

Verify Pincode successfully

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Click [Code Change] to input a new code 4567. Operation success

Reboot P004 Adapter, and enter the new pincode on Radio to verification

Verify Pincode successfully as well

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Click [Read eeprom] to read the EEPROM data and save it after reading.

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Click [Write eeprom], select load external data and choose the original eeprom data just saved to write into the Ford radio.

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

Besides Ford SONY TMS470, OBDSTAR DC706 also supports 6000CD NEC70F3357/ TMS470, SONY NEC70F3357 and SONY 6CD TMS470 radios. Most radio ECUs support OBD and Bench modes, only 6000CD TMS470 supports OBD and Boot modes.

Attach the OBDSTAR DC706 Ford Radio Support List below.

Read Write Ford SONY TMS470 Radio Code EEPROM with OBDSTAR DC706

www.obdexpress.co.uk

Which Tool Can Correct Mileage for VW MQB R7F7014xx 5D Cluster?

 Currently, Yanhua Mini ACDP 2 and CGDI CG100X Programmer at OBDexpress.co.uk can support mileage correction for VW MQB R7F7014xx 5D Clu...