GODIAG GT105 + Full Protocol Jumper: Good ECU Connector to Have

 GODIAG GT105 + Full Protocol OBD2 Jumper is a professional connector to program keys, correct mileage, read/write/clone ECU data with Xhorse, CGDI, Autel, OBDSTAR tools etc.

Among them, GODIAG GT105 supports to short-circuit OBD2 on car to activate IMMO match, connect & diagnose ECU or draw power from battery. Full Protocol OBD2 Jumper is used to connect ECU programmers by OBD way, applicable to PCMtuner, MPM Tool, MPPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.

OBDSTAR P50 Repair VW Airbag Module

Connect airbag module to GT105 via Full Protocol Jumper.

Connect GT105 & OBDSTAR P50 via diagnostic cable.

In this way, we can read ECU info, read & erase DTC, erase crash by OBD.

Autel MaxiSys Elite II Diagnose & Program VW Airbag Module

Connect airbag to GT105 via OBD2 Jumper & 120Ω

Connect GT105 to J2534 VCI & Elite 2 via diagnostic cable.

Thus, we can do action test, read ECU info/ DTC/ data stream, coding, etc.

LAUNCH X431 V PRO Diagnose & Repair VW Airbag Module

Connect airbagto GT105 via OBD2 Jumper & 120Ω resistor.

Connect GT105 to X431 V PRO via diagnostic cable.

So we can read ECU info, read & clear DTC, read data stream, freeze frame, do action test, secure login, etc.

MPM Reads 2008 Chevy Avalanche E38 ECM, GM Gen4 V8 Data

Connect MPM ECU Programmer to GODIAG GT105.

Connect MPM to PC via USB cable.

Connect GT105 & ECU module via Full Protocol Jumper.

Supply 12V power to GT105, press ignition on.

Open MPM software,

Read vehicle >> Gather info >> Read

After reading, save & rename data file.

www.obdexpress.co.uk