Xhorse VVDI Key Tool Plus adds key ID46: Nissan Navara 2017

Xhorse VVDI Key Tool Plus is able to add ID46 key for Nissan Navara 2017 via OBD successfully.

 

Prepare an original working key & a new key.

Frequency: 433Mhz

 

• Read & Calculate Pin Code

Connect Key Tool Plus with OBD, press

Immo programming >> Nissan >> Read BCM code and release ELV(4 digits access code) >> Start programming >> Read BCM code

Switch ignition on.

 

Body computer number(BCM number): 595F1

Press “OK” to get the password match.

Note: please make sure the WiFi is connected.

 

Whether to calculate the password directly? Yes

 

Pin codes have been read out, please record.

• Program Key

Go back on VVDI Key Tool Plus,

Select from system >> Normal key >> 4 digits PIN >> Type 2(CAN) >> Start programming >> Program keys

 

Input password: 5862, press “OK”.

 

Insert the key and switch ignition on.

 

Please follow the steps below to complete the program:

1. Turn off ignition switch and remove the key, wait for 5s;
2. Insert a new key, turn on the ignition switch, wait for 5s;
3. If want to add multiple keys, please repeat step1, 2.

Note: up to 4 keys can only be added. If the key is full, you need release the direction lock again then perform add key function.

 

Start the car once with first key, switch ignition off and remove the key, complete the program.

• Program Remote

Remote key adaptation >> Type 1 >> Start programming >> Program a remote

Press UNLOCK button of remote.

Success.

• Test Key

Both keys can start the engine, and the remote work well.

Key adding had done!

This is using VVDI Key Tool Plus to program a Nissan Navara 2017 new key via OBD successfully.

https://www.xhorsestore.co.uk/