Wednesday 26 April 2017

How to install Opcom firmware v1.65 v1.70 VAUX-COM 120309a Windows 7

2017 Opcom firmware v1.65 and Opcom firmware v1.70 updated! This is how to step by step install Opcom firmware v1.65 v1.70 VAUX-COM 120309a on Windows 7.

Free download VAUX-COM 120309a software:

Demo: How to install Opcom v1.65 v1.70 VAUX-COM 120309a

1.Install VAUX-COM Software
Open Computer
Open VAUX-COM-120309a DVD/CD-RW Drive or open free software file
VAUX-COM 120309a-2
Open VAUX-COM-120309a software
VAUX-COM 120309a-3
Accept license agreement
VAUX-COM 120309a-4
Click “Install” to install software
Installation progress, extracting file to C:/VAUX-COM-120309a+131223d file
2. Install Driver
Click “Extract” to extract FTDI CDM Drivers
VAUX-COM 120309a-5
Connect op-com cable with computer, system will install driver automatically
VAUX-COM 120309a-6
Right click Computer>>Manage>>Device Manager>>Universal Serial Bus controllers>>USB Serial Converter to check if opcom driver is well installed
VAUX-COM 120309a-7
3.Configure VAUX-COM
Right click VAUX-COM120309A+131223d GB software on desktop, select “Run as Administrator”
VAUX-COM 120309a-8
Loader has been installed into target
Open VAUX-COM 2012V software
Click “Settings” option
VAUX-COM 120309a-9
Select Interface type: VAUX-COM Revision B, B+
Then click “Test Interface” button
VAUX-COM 120309a-10
Then software will display firmware version, interface test ended successfully
Press “Save Config” to save settings
Press “OK”
VAUX-COM 120309a-11
4.Diagnose with OCPOM
Connect Opcom interface with vehicle
Back to VAUX-COM main menu
Select “Diagnostics”
Select “Automatic Vehicle Identification”
VAUX-COM 120309a-12
Select “KWP-2000” and diagnostic connector
Open will auto detect and display vehicle information
VAUX-COM 120309a-13
Start to diagnose your vehicle.

No comments:

Post a Comment

LAUNCH-X431 IMMO Elite Adds BMW CAS3 Key via EEPROM

 This is a guide on how to use LAUNCH X431 IMMO ELITE to add a BMW CAS3 key via EEPROM. Before that, you'll need to upgrade software v...