Now Yanhua Mini ACDP1/ACDP2 can support key copy function for 2020–2024 BMW G series BDC3 smart key (Hungary key) /U series BCP ICP key (with and without UWB functionality).
This guide explains how to successfully clone a BMW BDC3 key.
Required Equipment:
- Yanhua ACDP2/ACDP Key Programmer
- Yanhua Module 38 License
- Yanhua BMW BDC3/BCP ICP Interface Board
Procedure:
Software Installation
- Install latest ACDP software:
- ACDP1: App v1.0.64+
- ACDP2: App v2.0.8+
- PC Software: v3.0.141+
- iOS App: v3.6.4+
Key Verification
Remove key rear cover
Verify: BMW BDC3 key for G-Chassis, Hungary manufacture (2020–2024)
Initial Setup
Launch ACDP II software
Select BMW-> BDC3/BCP ICP Copy Key-> Special Function
Original Key Identification
Choose ‘Identify Key Info by BAV Adapter’
Connect ACDP to BAV adapter
Insert original key-> Read & save key data
Data Extraction
Return to previous menu-> Select ‘Help for G-BDC3 (NCF2953)’
Connect: Original key, BDC3 ICP board, Mini ACDP unit
Select ‘G-BDC3 (NCF2953) -> Read Orig-Key Data’
Verify key information-> Confirm to proceed
Data Backup
Backup key data (.bin format)
Record: File path, date/time, VIN, Key ID
Key Programming
Replace with blank key
Select ‘Write New Key Data’
Important: Original key must be disconnected
Confirm new key is blank
Select original key backup file
Verify original key info-> Write data
Verification
Swap Yanhua ACDP BMW BDC3 ICP board for BAV adapter
Insert new key-> Special Function-> Identify Key Info
Confirm new key data matches original
Done!
No comments:
Post a Comment