Tuesday, 12 September 2023

How to Transfer Yanhua Mini ACDP-1 Module License to ACDP-2?

 As we know, the 1st generation of Yanhua Mini ACDP has been discounted and replaced by ACDP-2 which is easier to connect and use. (Click here to review). Now most ACDP-1 licenses also can be used with ACDP-2. Check the transfer plan below carefully.

The license transfer policy is only for customers want to use Mini ACDP-2. If you don't want to change to ACDP-2, the ACDP-1 is still working as before, no need to do anything.

Two methods to get licenses from Mini ACDP-1 to Mini ACDP-2:

To perform the transfer plan A or B, please make sure you have a Yanhua Mini ACDP-2 first.

  • Plan A: License Transfers

If you don't want to use Yanhua ACDP1 any more,

Transfer all ACDP-1 Licenses to ACDP-2 and delete ACDP-1.

License transfer fee: €66

  • Plan B: Shared License

Share all ACDP-1 License with ACDP-2

After license sharing, both ACDP-1 and ACDP-2 can use the shared License at the same time.

That means you will have ACDP-1 and ACDP-2 two devices.

(Notice: If you buy a new Module after Sharing license, this new module license only can be used on one device)

License transfer fee will be 35% of the total amount of shared module Official price. You can send your ACDP-1 SN to obdexpress.co.uk for check.

Transfer Yanhua Mini ACDP-1 Module License to ACDP-2

Which ACDP1 Modules are compatible with Yanhua ACDP 2?

Currently, ACDP 2 can use with most ACDP 1 Modules except Module 15, Module 18, Module 19, Module 25, Module 30, and Module 8.

  • The ACDP Module 15 App is modified by Yanhua tech, and it will soon be compatible with ACDP2. Don't need to purchase a new module 15.
  • The Module 18, 19, 25 and 30 differ slightly between ACDP-1 and ACDP-2.

You can buy the related ACDP-2 Module directly.

Or just make a little modification on the adapter of old modules. No need to buy new modules.

Cut off the protruding plastic and part on old interface board (shown as figures below):

Transfer Yanhua Mini ACDP-1 Module License to ACDP-2

Note: ACDP 1 Module 3 and Module 12 can be used directly, no need cutting.

  • If you have a Yanhua ACDP-1 Module 8, and want to update it to work with ACDP-2, it will prompt "No license". You need to pay an extra €60 to buy the license A51F (Auth ID) BMW FRM Footwell Module (ACDP-1 Module 8 costs €34, ACDP-2 Module 8 costs €94).

www.obdexpress.co.uk

No comments:

Post a Comment

FormulaFlash Read Bosch MG1CS201 TC298 ECU on Bench

  FormulaFlash has been tested and verified to read the Bosch MG1CS201 TC298 ECU successfully in Bench mode. The ECU can be connected dir...