VVDI Key Tool Plus - Benz W211 AKL programming

 This is the test on how we use Xhorse EZS Adapter and VVDI Prog to read EZS EEPROM data and use Xhorse VVDI Key Tool Plus to get the password and program a new BE key for Mercedes Benz C240 2004.

Tools:

Xhorse VVDI Key Tool Plus

Xhorse EZS Adapter for Chassis W211

Xhorse VVDI PROG

Benz W211 EZS

Part 1. Read original&flashed EEPROM data

Put EZS in Xhorse EZS adapter for W211.

Use the EZS Adapter Cable to connect Xhorse VVDI Prog and EZS adapter.

Supply 12V power for Xhorse VVDI Prog.

Open VVDI Prog software.

Press “Read” to read the EEPROM.

Press “Verify” to check the information.

Then press “Save” to save the EEPROM data file.

Press “Flash” to flash the EEPROM.

Press “Verify” to check the information.

Then press “Save” to save the flashed EEPROM data file.

Upload both files to Xhorse VVDI Key Tool Plus.

Part 2. Get the password and prepare key file

Time to use Xhorse VVDI Key Tool Plus.

Press

IMMO Programming>>Europe>>Benz>>Select from system>>Prepare Key File>>Start programming>>Prepare Key File>>OK

Load the Original EEPROM file and we will see the password.

Press “OK” to input the password.

Here choose v051.

Insert a new key into Xhorse VVDI Key Tool Plus and press “OK”.

Then save the key file.

Part 3. Write a new BE key

Back to “Select from system”. Press

Read/Write key via IR>>Start programming

Press “Infrared identification key information” to check the key information.

Press “Continue” to get back and press “Erase the BE key”.

Also we can press “Infrared identification key information” to check the key information.

Press “Write BE key” and load the key file to be written.

Writing data success.

Press “Infrared identification key information” to check the written key information.

Restore EZS to the vehicle and start it by the new key.

Complete!Nice work!

This is how we use Xhorse EZS Adapter, VVDI Prog and VVDI Key Tool Plus for Benz Chassis W211.