How To Use Tachograph programmer Tacho CD400

Tachograph programmer Tacho CD400 blue is designed for verification, calibration and configuration of control devices (tachograph) when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the tachograph when checking the speedometer and odometer.
Here is the use manual for Tacho CD400:

User manual PDF download:
http://www.obdexpress.co.uk/upload/pro/tachograph-cd400-programmer-user-manual.pdf
Video demo:
Tacho CD400 DTCO Power ON

Tacho Tachograph Programmer CD400 VR2400 Odometer Reset

Tacho CD400 DTCO Menu Navigation

Tacho CD400 Clock Test on Kinezle 1318 using VDO senor

Tachograph Programmer CD400 Clock Test on MTCO1324

Clock Test on Kienzle 1319 using TVI sensor

Tachograph Programmer CD400 W Measure(1)

Tachograph Programmer CD400 W Measure(2)

Clock Test on Kienzle 1318 using TVI sensor

Details of Tacho CD400 blue:
Supported Tachographs:
Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
A Workshop Card is required to calibrate the digital tachographs
Tachograph Programmer CD400 blue Functions
W figure determination on measuring track (with optional photo-cell) or rolling road.
K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
Parameter programming.
Activation and deactivation of IMS (Independent Motion Signal).
Activation and deactivation of VDO counter.
Odometer reset and adjustment (mileage correction).
Speed simulation and customizable automatic test diagram.
DTCS reading (Digital) and erasing.
Sensor pairing (KITAS activation).
Clock test.
Workshop card’s PIN recording and input through CD400 blue.
Tachograph Programmer CD400 blue Advantages:
No power connection nor battery charging required, the only tester powered by the tachograph itself.
Compact size, the smallest tachograph tester on the market.
User friendly, clear 4 lines menus, no training required.
Automatic tachograph model detection on power on.
Double accuracy of the W factor measure on track by detecting half pulses.
The only tester being able to reset the odometer and change the sender type on the VR2400.
Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.
Tachograph Programmer CD400 blue Technical Specifications:
Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)
White LED backlight
Size: 150 x 100 x 45 mm
Supply voltage: 9 to 30 VDC
Supply current: 12mA
Case: green-blue ABS (IP40).
Operating temp: -20…+70°C
Weight: 155g
http://www.obdexpress.co.uk/wholesale/tacho-programmer-cd400-blue.html
http://www.mileageprogrammer.com/how-to-use-tachograph-programmer-tacho-cd400/