What tool can be used for 2008-2012 Subaru Diesel Car diagnosis service reset

 Question: have 2008-2012 Subaru Diesel Cars to perform oil reset, DPF cleaning mod and reset, reprogramming, which tool are advised?

 

Answer:

Advise you have one V2020.7 VXDIAG SUBARU SSM-III SSM3 SSM4 Diagnostic Tool, it will do, please look at its package image below.

 

SSM4 Software version: V2020.7

Free download here:

https://mega.nz/folder/ucIEhR7J#QUGAbagyLLsCslE585Fu2Q  (including SSM3 2018.10; SSM4 V22.60; FlashWrite 2)

OS: Windows XP, Windows 7

Language: English, German, Spanish, French, Italian

Wifi communication: confirmed

USB communication: confirmed

 

How to install SSM4 Software:

https://www.youtube.com/watch?v=y1krg0Xy93c

Coverage:

Subaru vehicles 2005- 2018 year, ssm4 works with the vehicles from 2016 onwards. Special dual cell processor for automotive, fully compliant with all vehicles protocols.

 

Fully compatible with SAE-J2534: confirmed

 

All System Diagnosis: confirmed

 

Each System Check: confirmed

 

Save various data sampled during fault diagnosis operations, and to load data for viewing after work is complete: confirmed

 

Immobilizer registration: confirmed

 

Read CF application measurement data: confirmed

 

Convert/Save measurement data on driving recorder: confirmed

 

After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog probe to perform analog sampling: confirmed

 

Program Subaru smart key : confirmed

 

Features:

Available to add Toyota, Honda, Porsche, JLR software to the device (contact obdexpress.co.uk for payment).

 

Enjoy!

Digiprog 3 experience report (for Benz VW Toyota)

 My experience with Digiprog 3 Odometer Programmer.

Mercedes Benz OBD
w211 30 seconds
w212 pre-facelift 30 seconds (EIS)
w203 face lift 30 sec
w204 pre facelift 30 sec (EIS)
facelift 30 sec (EIS)

VW GOLF 4,5,6 OK OBD2

MOST TOYOTA OK NO PROBLEM EEPROM
70 percent Nissan, not good for navara/pathfinder 9s12, older dash works but certain one kills dash
Old ford ranger mcu dash ok solder pins on back

Another good tip is to make your own icp cable for digiprog , download cable pinout and make 123458 for in circuit programming works very well.

hope this info can help.

 

More Digiprog 3 V4.94 mileage correction feedback:

http://www.mileageprogrammer.com/digiprog3-v4-94-mileage-correction-feedback/

Can't Benz C6 OEM DOIP VCI be used with Xentry?

 I purchased the BENZ C6 OEM DOIP Xentry Diagnosis and am having some issues with it. It appears that it cannot communicate with a Xentry. I do have my own WLAN dongle since one was not provided but am unsure if i set up the dongle correctly or what else needs to be done to get it connected. I questioned the seller's engineer and finally they help me connected it to the vehicle by Teamviewer.

 

Image 1: VCI cannot be used. Firmware is older than the installed program version.

 

 

Image 2: Not paired with Xentry Diagnosis VCI.

 

 

Image 3: WLAN stick of diagnosis computer not found.

 

The seller help me by Teamviewer:

I have Benz software installed not on the desktop. When the seller help me by Teamviewer, they may also double click that Mercedes Icon at the top and all the shortcuts are there.

 

The engineer replied:

This is c6 wifi, the password is 12345678, if you need to connect to c6 wifi, the remote will be disconnected.

 

And I questioned:

Got it, do i need to use the wireless dongle to connect to it or can I use my laptops built in adaptor?

 

The engineer replied:

No. If you use wireless connection, you need to disconnect the usb cable.

If your computer has a built-in wireless network card, you don’t need this dongle:

 

Finally! Thanks to his quick help I connected it to the vehicle.

 

Hope it helps if you have the same problem.

 

If you are also interested in buying BENZ C6 OEM DOIP Xentry Diagnosis, I recommend you go to obdexpress.co.uk, their customer service is great.

What equipment can be used for Honda OEM

 Hello, friends, Need Honda OEM Software and Device. obdexpress.co.uk engineer recommend vxdiag and HDS.

 

Option 1. vxdiag vci Honda

It supports Honda ecu BCM programming.

Look at the product image:

Price: €187

 

Option 2. Honda HDS HIM

It will perform as the same as that of the specialized repair equipment of the car factory. It can program ECM.

 

Look at HIM image:

Price: €92

 

Tip: do not choose North America to when installing the software, please choose this other option. Because some regional software functions have limitations.

 

Watch video on How to Install Honda HDS HIM 3.102.004 on Windows 7:

 

The true clone tools running the HDS software have identical features to the dealer ones.
They are basically dealer tools with cracked software so you don't have to be logged onto the Honda dealer network or $$ subscriptions for them to function.

Things that may not work include reprogramming or updating computer modules.
This requires firmware files for the ECU's etc which asfaik come from the Honda servers.
I've never looked at this aspect in any depth.

Legislation in the EU afaik also stopped manufacturers locking down the tools and forced them to allow independent garages access to them as well as authorized dealers.

 

HDS HIM Good review:

I'm back with an update, and happily it's positive. I now have a working HDS for $100 US.
It took me a while to get it going because for some reason the USB-serial adapter I was using was only allowing partial communication between the HIM and my laptop. I could program the HIM and see it respond, and it even passed a self-test with the loopback plugs they give you. But it wouldn't connect the HDS to the vehicle. After numerous tries I decided to swap out the adapter for another one and it connected right away. I had to mess around a bit to make the HDS accept a fake repair order # and then I was in. Did some poking around and even cleared some (presumably old) DTCs that were lurking in areas where an OBDII scanner would never see them. I'll check again at a later time to see if any come back.
I might have played around for longer but it's rather cold outside here today so I called it quits for now.

TLR- Buy this. If your laptop doesn't have a hardware 9-pin serial port you'll need a USB-serial adapter, they do offer one as an option with the unit or you can get one from Amazon, computer store etc. Just make sure you can return it if it doesn't work.

 

For more reviews, google them.

 

Enjoy!

Ksuite V2.70 ECU read and write test report

 Ksuite V2.70 free download for Kess V2 V5.017: https://share.weiyun.com/WF3yWyuZ (password: g311lg). After downloading it, please install it on any of windows XP, win7 /8 /10 (setup video: https://youtu.be/1OdwlYGu-W8) , and then enjoy it.

 

Ksuite V2.70 Test Reports:

- well my ksuite loads a bit faster than 10-20 sec because i have an i7 processor and 8GB of ram , well it dit not update anything , SD card did not got update too , just compared three versions 2.23 2.53 and 2.70 , nothing changed in them.

 

- GOLF EDC16U34 read write ok

 

- This 2.70 has changed VAG EDC17CP14 to no read on OBD

Unmatched Key N is on BMW due to chks issue

No issue with EDC15 on 2.23

 

- It works only with clone kess V2 V5.017.

 

- What about edc17c60 and c64: I tested before on 2.53 EDC17C64 golf 7 2.0 tdi with tprot ON. Only write with suitable VR file. VR file works when ecu have Tprot, Kess clone can write EDC17C64 with TprotON (with suitable file), also file was without checksums. So Kess clone also did good chk.

 

- Passat EDC17_C46 Write without problem

 

Using Tip:

1. Question: Wake up error MED17.5 after try 2.70 problem the same.

How to fix this:

roblem is not in the software. He put the computer down on the table and hung it with octopuses. Give him a good voltage and see if he will give you another mistake.

gasoline computers have some read and write problems. Do you think the original Kess doesn't make that mistake? Well, I will answer you: he gives it. This error depends on many things: wrong protocol, wrong speed, low voltage, problem in Kess, immo protection.

 

2. If Ksuit 2.70 not read or write the ECU, try back to Ksuite 2.53 (download link:

https://share.weiyun.com/5FPSb3H password: i4cwgr)

 

Enjoy!

Order the best Kess V2 V5.017 master here:

https://www.obdexpress.co.uk/wholesale/kess-v5.017-ecu-online-version.html

How to solve VVDI2 FEM BDC prompt "current SW version doesn't support"

 Question: I went to a BMW F30 all keys lost today. FEM on the bench connected through test platform I can read key data but when I go to prepare FEM I get and error message "current SW version doesn't support by tool please prepare with e-sys" what do I need to prepare with e -sys? I've done spares and lost all keys for f30 2015 420d 2015 +2016 never had any issues just this one.

 

Solution:

Option 1.

Downgrade SW: e sys - is a soft for BMW programming - maybe to downgrade it to lower version that is supported.

You need to flash it with E-Sys to a newer, supported version, the VVDI will do it.

 

Option 2:

If you are not very good to play with Esys you can use Autohex which doing this process a bit different. It is matching the software as it likes and after going through. Takes much much longer and sometimes comes with some strange errors and you need support to help.

 

Reviews:

- I use Autohex full to update and unlock.
Just update fem body and gateway and then unlock.

 

-I have Autohex lite locksmith version and regularly must ask the support to downgrade the FEM by teamviewer

 

What about other tools i.e Yanhua ACDP?

Same as vvdi and other tools you need to downgrade fem.

 

Hope it helps!

How about the evaluation of Xtool X100 PAD2 key programming?

 As time goes by, more and more locksmiths purchase and test Xtool X100 PAD2 Key Programmer, and can't help share with other locksmiths in the world their joy of success and meanwhile seeking solutions to their problems. In this article, we have collected the latest test reports since 2021 for your reference.

 

2012 HYUNDAI i20 pin read Ok, key program ok {3 minute}

 

Fiat 500 Year 2009, Done in 2 minutes, Bravo xtool x 100 pad2 Pro

Citroen Berlingo 2019 UK SUCCESS

Pulled pin with working key Type 1

Programmed OEM remote) key,

Would not communicate under Vehicle selection,

Programmed under system Type 4

It was with global version Xtool PAD2.

 

2014 Ford Transit Custom EU5 spare remote key inside 20 seconds. this was a EU5 van so 2012 - 2016. Was almost instant just like truecode.

 

 

-New card key Renault Laguna

-Immo

-Remote

- 5min (the real working time was a minute.)

With x100pad 2 pro

 

VW Touareg 2008 European version with Id46 key. Done successfully with Xtool PAD2.

 

Jeep Wrangler 2007 all key lost, done by Xtool PAD2.

 

xtool x100 pad 2 pro do akl for vw bora 2005.

 

Jeep grand cherokee 2007y with xtoolpad2 no problem.

 

Oven Key Opel 2015 done by xtoolpad2 no problem, guide:

http://blog.obdexpress.co.uk/2021/02/13/xtool-x100-pad2-program-oven-key-opel-2015-successfully/

 

Xtool pad 2 can program a 2002 dodge stratus keyfob, need to use eeprom to read pin out of antenna.

 

Hyundai i20 2015 Spare keys added very quick.

 

Renault Scenic 2010 work with x100 pad2, Very fast! I did more than 3 of them.

 

Jeep Grande Cherokee 2012 is possible to add key with xtool.

 

AMAROK 2016/2019 GRAVANDO CHAVESAMAROK 2016/2019 GRAVANDO CHAVES chip 8E

 

Suzuki alto k10 all Lost key xtool pro 2

 

To be updating...

 

Thanks all users.

 

Thanks Laurance for editing

 

www.obdexpress.co.uk