Obdstar X300M Golf OBD2 Odometer Correction

Exciting news here！！！ Obdstar X300M  can change mileage of Golf cars via OBD2 now。

Obdstar X300M Golf car list follow:

Golf

GOLF5 -2006

GOLF5 2007- CDC

9S12XHZ512

NEC+24C32

Read write mileage

Read EEPROM

Write EEPROM

NEC+24C64 VDO -12

NEC+24C64 color meter(type 1)

Read EEPROM

Write EEPROM

Read write mileage

NEC+24C64 color meter(type 2)

Read EEPROM

Write EEPROM

Read write mileage

NEC+24C64 13- white meter

Read EEPROM

Write EEPROM

Read write mileage

VDO K line

GTI

NEC+24C64 VDO -12

NEC+24C64 color meter(type 1)

Read EEPROM

Write EEPROM

Read write mileage

NEC+24C64 color meter(type 2)

Read EEPROM

Write EEPROM

Read write mileage

NEC+24C64 13- white meter

Read EEPROM

Write EEPROM

Read write mileage

The important tips-

obdstar x300m ebay

obdstar x300m how to use

obdstar x300m update

obdstar x300m manual

obdstar x300m review

obdstar x300m toyota

obdstar x300m vehicle list

Source:http://www.mileageprogrammer.com/obd2-change-golf-mileage-with-obdstar-x300m/

Diatronik: first Airbag Renesas Infineon Reset tool via OBD2

obdexpress.co.uk (old domain obd2express.co.uk ) newly release Diatronik SRS+DASH+CALC+EPS OBD Tool with USB Dongle, Diatronik is the first Airbag Renesas Infineon Reset tool via OBD2 that CG100 PROG III airbag reset tool can’t do via OBD2. Diatronik hardware and software is developed by senior Russian engineers.

Russian engineers are planning to develop Diatronik an 8 in 1 automotive software tool:

Airbag reset tool: reset all Renesas and Infineon airbag by OBD2 up to 2016 (Confirmed)

DASH tool: correct Dash mileage via OBD2 (Confirmed)

CALC tool: Calculate Airbag via USB (Confirmed)

EPS tool (Confirmed)

OBDII Diag (under development)

ECU tool (under development)

IMMO Tool (under development)

G-Prog functions (under development)

Diatronik SRS+DASH+CALC+EPS OBD Tool with USB Dongle for sale: $1,300, ship by EMS (Not from China)

How to update Diatronik tool?

Diatronik tool update online, when the newest software version come out, you will receive prompt to update.

What adoptions / Types do Diatronik tool supports?

1. Renesas

R5F61797, RF61725, R5F61723, R5F61721, the model in the computer are assembled as follows: Toyota, Honda, Subaru

2. Support and Adoption:

XC2060N-40F,XC2060M-104F,XC2336B-24F,XC2336B-40F,XC236

1A-56F,XC2361A72F,XC2361E72F,XC2363A-56F,XC2363A-72F,XC2364A-56F,XC23

64A-72F,XC2364A-104F,XC2365A-56F,XC2365A-72F,XC2365A-104F,XC2361B-24F,XC2361B-40F,XC2363B-24F,XC2361B-40F,XC2364B-24F,XC2364B-40F,XC2365B-24F,XC2365B-40F,the model in the computer are assembled as follows: Nissan, Suzuki, Hyundai, Ford, Mazda, Land Rover, Jaguar, GM.20seconds of read and write. This speed  supported  is exclusive  in the worldwide.

3. Support and Adoption: Freescale

MPC5604P (0M26V)(1M36W)the model in the computer are assembled as follows: Honda

4. Support and Adoption: ST

SPC560 the model in the computer are assembled as follows: Volkswagen

5. Support and Adoption: CPU

ATMEGA169, ATMEGA32, ATMEGA16, ATMEGA8, ATMEGA88, ATMEGA48. The instrument model tune number of kilometers

Support List:

SRS TOOL

Acura—-Acura Renesas H8SX CRASH Reset

Citroen—Citroen SRS V850 D70F3624 UART

Ford:

Ford FOCUS 2 CRASH RESETER CAN BUS

Ford Renesas RH850 SRS Tool

FORD SRS INFINEON XC23xx CAN BUS

Ford SRS K-Line OBD2

Honda:

Acura Renesas H850 SRS Tool

Hyundai

Hyundai INFINEON XC23xx CAN BUS

Hyundai MAC7242 CAN BUS

Hyundai MOBIS eeprom CAN BUS

Hyundai Solaris NEC UART

Jaguar

Jaguar SRS INFINEON XC23xx CAN BUS

KIA

KIA INFINEON XC23cc CAN BUS

KIA MAC7242 CAN BUS

KIA MOBIS eeprom CAN BUS

KIA SPC560 UART

LAND ROVER

Land Rover SRS INFINEON XC23xx CAN BUS

MAZDA

Mazda 3 CRASH Reseter CAN BUS

Mazda SRS INFINEON XC23xx CAN BUS

Nissan

Nissan INFINEON XC23xx CAN BUS Ver.1

Nissan INFINEON XC23xx CAN BUS Ver.2

Peugeot

Peugeot SRS V850 D70F3624 UART

Renault

Renault Logan Crash Reset K-LINE(Temic)

Renault Megane III/Fluence/Scenic III(CAN BUS)

Renault SPC560 Crash Reset CAN(Continental)

Subaru

Subaru Denso H8SX/1725,1721 256kb(2012-)

Subaru Denso H8SX/1797 512kb(2012-)

Subaru Denso H8SX K-Line Reset(2012)

Suzuki

SX4 SPC560 Crash Reset CAN(Continental)

Toyota

Toyota Denso H8SX/1725,1721   256kb

Toyota Denso H8SX/1797              512kb

Toyota Fujitsu H8SX/1725,1721    256kb

Toyota Fujitsu H8SX/1797               512kb

Toyota Renesas H8SX UART Tool (GPROG ONLY)

Volvo

Volvo V30-V40 SRS INFINEON CAN BUS

How to use Diatronik software tool?

Diatronik software tool is a windows-based tool, it needs to use with a computer, plug the Diatronik cable 16pin port into the vehicle and USB port to the computer. The package contains a small USB dongle, it is used to calculate SRS.

Diatronik tool language options: English, Russian…..

Here lots Diatronik tool connection guide / diagrams:

PS: for Diatronik user manual and install video, coming soon.

   

Done!

http://blog.obdexpress.co.uk/2017/06/09/diatronik-first-airbag-renesas-infineon-reset-tool-via-obd2/

Xprog programmer read 2014 Crafter mc9s12xdt384

It’s an easy Xprog user manual of reading 2014 VW Crafter mc9s12xdt384 with Xprog post version 5.0.

Model:

2014 Volkswagen Crafter

Xprog programmers can be used:

Xprog programmer 5.70

Xprog m 5.60

Xprog box 5.55

The important note:

2014 Crafter has mc9s12xdt384 with secured so can not read with xprog 5.0, You need New version xprog.

Photos for you to check your component:

  

Good luck!

http://blog.obdexpress.co.uk/2017/06/07/xprog-programmer-read-2014-crafter-mc9s12xdt384/

DIY Reset an Electronic Parking Brake Without VIDA

Brake bias has moved ever rearward in the past decade. As time goes on, I’ve noticed that the newer my cars get, the quicker the rear pads wear in comparison to the fronts. Front pads are lasting 50-60K, while the rear set can barely reach 30K.

In theory, replacing a set of rear pads is a cinch. For Volvo drivers with an electronic parking brake equipped vehicle, there is another step involved that may seem like a money grab for the dealership. Fret not – there is another way.

VIDA is not required

Electronic parking brakes have eliminated the use of long, sloppy cables that traditional lever parking brakes have utilized for years. While this eliminates complexity in one area, it adds it in another. Most vehicles with EPB have small motors attached to the rear calipers. These are used to wind the caliper’s pistons in and out, simulating a parking brake being pulled.

 

With the motor removed, the input shaft for the piston retraction is visible. This allows the piston to be retracted manually using a T20 torx bit. Turning this shaft clockwise by hand will slowly retract it in, allowing the caliper to be removed for pad, rotor, or even caliper replacement.

Electronic alternative

VIDA is Volvo’s tool to interface with the many systems on P2 and P3 vehicles. It allows a technician to manipulate most every actuator, and read the data from all of the sensors easily. For the home mechanic, it is a cost prohibitive tool that is limited by the inability to license most of the software downloads and upgrades.

To sidestep VIDA requires an aftermarket tool. Many exist, and tools like the Autel EBS301 are made specifically to manipulate electronic parking brake systems from European manufacturers. These are of Chinese descent, and utilize reverse engineering to crack the codes of Volvo, Mercedes, and BMW vehicles.

Buying a dedicated electronic parking brake tool is a small investment that will ensure easy brake jobs for years to come. For the infrequent DIY’er, simply removing the EPB motor and retracting the piston manually is a great way to go.

http://blog.obdexpress.co.uk/2017/06/06/reset-an-electronic-parking-brake-without-vida/

How to install OPCOM VAUX-COM 120309a software on WIN10

This toturial is about  how to step by step install OPCOM diagnostic interface VAUX-COM 120309a software driver on Windows 10, especially for those troubled with “OP-COM usb is not detected on Windows 10”.
Run VAUXCOM.exe
Allow this app to make changes to your device

Go to Settings in VAUX-COM 120309a

吧   

Test interface

Connect the interface to the USB port, or install the USB driver

Close VAUX-COM 120309a
Opcom Computer management
Launch the troubleshooter

Again, open Computer management
Uninstall USB Serial Converter

Disconnect the internet
Update driver- OP-COM USB V2

Browse my computer for driver software

Continue installing this driver

Again, run VAUXCOM.exe as administrator
Allow this app to make changes to your device
Go to Settings
Then Test interface
Firmware version tested successfully

Apply settings

Go to Diagnostics

Successfully install Op-Com on Windows 10!!

www.hobdii.com

How to setup Renault can clip 168 driver software

This is how-to’s of Renault can clip 168 driver software driver installation.

Renault can clip driver software is installed after Renault clip software installation is complete.

The most important note!!!!!!!!

To install clip driver software is different from Renault can clip diagnostic interface!!

This is the major difference from previous CLIP version installation!

Here you go.

For Renault can clip 168 with item no.SP19-B

Wizard helps install software for 1B-Alliance Vehicle Communication Interface

Select: Install...automatically

Next

Finish installation of software for 18B-Alliance Vehicle Communication Interface

Open Computer management

Select 1B-Alliance Vehicle Communication Interface

For Renault can clip 168 with item no.SP19-C

Wizard helps install software for RLT2002 CAN Communication Interface

Select: Install...automatically

Next

Finish installation of software for RLT2002 CAN Communication Interface

Wizard helps install software for RLT2002 ISO Communication Interface

Select: Install...automatically

Next

Finish installation of software for RLT2002 ISO Communication Interface

Wizard helps install software for JCAE CAN APRES RENUMERATION

Select: Install...automatically

Next

Insert CD-ROM: OK

Files needed: Browse

Select the corresponding file

Finish installation of software for JCAE CAN APRES RENUMERATION

Wizard helps install software for JCAE ISO APRES RENUMERATION

Select: Install...automatically

Next

The same as the installation of software for JCAE CAN APRES RENUMERATION

Then finish installation of software for JCAE ISO APRES RENUMERATION

Open Computer management

Select JCAE CAN APRES RENUMERATION & JCAE ISO APRES RENUMERATION

Then you can run clip 168 software for Renault can clip reprogramming or obdii diagnosis!

Sourrce:http://blog.obdexpress.co.uk/2017/05/31/setup-renault-can-clip-168-driver-software/