Can PCMtuner Read ECU via OBD on Bench?

 Can PCMtuner Module 53/ 58/ 71 Read ECU via OBD on Bench? Surely can. PCMtuner + GODIAG GT105 + Full Protocol OBD2 Jumper can support Module 53/58/71 to read ECU via OBD on bench. That means the removed ECU module can be converted to OBD connection in this way.

In many cases of reading failure, users usually read a removed ECU via bench connection. That's the reason. At this time, if you have the GODIAG GT105 + OBD2 Jumper, problem can be easily solved. It's also workable to use a GODIAG GT100 break out box, which plays a same role.

Case1:

PCMtuner read PSA EDC17CP42 on bench failed.

Module 43

Freelander 2/ Evoque/ Discovery Spot 2.2L I4 Diesel(EDC17CP42)

Solution:

Method1. Read ECU by OBD on car.

Method2. Read removed ECU via GODIAG GT105 + OBD2 Jumper or GT100.

Case2:

PCMtuner read EDC17CP04/EDC17CP14 with module 71 on bench failed.

Solution

Check if the connection is correct.

For some older CP04/CP14 models, need to read module 50 by OBD(via GODIAG GT105 + OBD2 Jumper or GT100).

Why to buy?

Easy convert the removed ECU to OBD connection for data reading.

Check if the ECU is normal or workable via communication status.

Suitable for ECU maintenance workers to repair ECU modules from other car owners.

Different from the limited PCMtuner plug ports, it's more convenient.

PCMTuner read Mitsubishi Outlander ECU via OBD on bench success.

ECU: 1860A867 E6T70484 Mitsubishi Outlander 2006–2012 EVOX

Support: PCMFlash, ECUFlash

OBD2 PINOUT Diagram

www.obdexpress.co.uk