Mercedes FBS4: VVDI MB Tool or CGDI MB?

Have you had a good success with FBS4 keys with Xhorese vvdi mb tool or CGDI mercedes key programmer?

Possible to add a new FBS4 key using VVDI Mercedes?
NO! You CANNOT read data and password for the newest Mercedes cars after 2015 with FBS4 EIS.

Can I have a CGDI MB for Mercedes FBS4 key program?
YES! CGDI-MB now is confirmed to work for FBS4 key read and write.

Look here: CGDI MB key program is reading FBS4 key data successfully!



Discuss: CGDI MB or VVDI MB Tool?

The most important:
The main difference between cgdi mb and vvdi mb is that, on old Mercedes, cgdi mb is able to OBD program a new key while you have to disassemble EIS to add a new key with vvdi mb tool. That is why you should have a cgdi programmer for mb.

With VVDI MB, you should buy Vvdi prog too, because the are some eis and ecu’s that you cant do with MB Tool independently. For example some w210 eis or Sprinter 906. You should have both, VVDI MB Tool and VVDI prog. Or, if you have to buy some tool again, Simon Touch is the best, but its more expensive.
But if you have a CGDI MB, you have a chance to program a new key through OBD. All done with a tool. That’s the reason why I bought it.

Tech support from obdexpress.co.uk.



http://blog.obdexpress.co.uk/2018/08/01/fbs4-key-program-vvdi-mb-vs-cgdi-mb/

How to use Super SBB2 for Nissan NV200 key programming

we professionals working for obdexpress.co.uk have tested Super SBB2 key programmer：How to program a new key to Nissan Navara NV200. 

Here you go.


Nissan Navara and the key

Step 1: Super SBB2 gets security code of Nissan Navara

Step 2: Super SBB2 does immobilizer to Nissan NV200

If you don’t know Type 1 (CAN) or Type 2 (KWP), try one by one

First, try Type 1(CAN)

The key tool failed to connect the car

Then, it should be Type 2 (KWP)

Switch ignition on and press ENTER to continue

The machine communicates with the car successfully!

Program keys:

You have to complete the following procedures.

engine can be started:

1. switch ignition off and remove the key

2. insert the first key and switch on for 5 sec;

then switch off and remove the key

3. if you want to add more keys, please repeat

Job’s done!





Confirmed! Super SBB2 is able to program new keys to Nissan Nv200.

Src:

http://blog.obdexpress.co.uk/2018/07/30/super-sbb2-programs-new-keys-to-nissan-nv200-success/

CAR FANS C800 FAW J6 Truck Euro III: Diagnostic Function Tested 100%

Tested successfully!

Today, we professionals working for obdexpress.co.uk have tested CAR FANS C800 heavy duty truck diagnostic tool.

Video:

Here you go.

Faw J6 truck

Go to CAR FANS C800 FAW software

Select Faw J6

Engine system

Unit Pump Engine System

Euro III Unit Pump Diesel Engine

Oshiba Michiyoutsu Gas Drive FAW autonomous

Read version

Read fault code

Advanced function

Gas drive (FAW autonomous) post treatment test (urea pump pressure)

Gas flooding after treatment
The following conditions must be met before diagnosis:

1. ensure that the chassis pressure is greater than the barometer 6 bar
2. the urea injector has been removed from the exhaust pipe
3. the trachea and urea pipeline are connected well
4. during diagnosis when urea pressure reaches 3 bar time
5. urea injector will be opened 3 secondary injection. please pay attention to obseurea pressure

urea pressure (bar): 0.0

Test status:
Determine if urea pressure is reached 0.15 bar, please wait

Test success.

Job’s done!


CAR FANS C800 Vehicle List:

Commercial Vehicle: FAW,DONGFENG,Mercedes-Benz,CNHTC, FOTON, SANY, JAC, SFH, CAMC, UD, VOLVO, Mitsubishi, IVECO, MAN, SCANIA, JMC, HINO, ISUZU, SHACMAN, C&C, Hyundai, XCMG, BEIBEN, KIA, KING LONG, YUTONG, HIGER, GOLDEN DRAGON, YOUNGMAN, BYD, ANKAI, DAEWOO, SUNWIN, ZHONGTONG, HUANGHAI, WZL, SUNLONG, TOYOTA, ASIASTAR

Passenger Vehicle: Mercedes-Benz, Hyundai, VW, Zhonghua, JMC, GreatWall, ZZNISSAN, JAC, ZXAUTO, DONGFENG, LIEBAO, CHERY, FUDI, GONOW, HUATAI, SSANGY, MAXUS, JX-ISUZU

Machinery: CAT, KOMATSU, VOLVO, SANY, LOVOL, JOHN DEERE, HITACHI, KOBELCO, HYUNDAI, ZOOMLION, CASE, LISHIDE, DOOSAN, SUMITOMO, YUTONG, Bobcat, SHANTUI, LiuGong, IHISCE, XCMG, KUBOTA, Takeuchi, XGMA, Atlas, TEREX, YUCHAI, LONKING, SUNWARD, SEM, Jonyang, PENGPU, YTO, JAC, XINYUAN, DXZG, HENGTE, SANYUAN, HUANGHE, SHUNTONG, STRONG

Engine &ECU: Bosch, Denso, Delphi, Perkins, Deutz, Weichai, Yuchai, Fawde, Cummins, Yunnei, Changchai, SDEC, DCD, Yangchai, Quanchai, EUP, JX-Isuzu, XCE, Kernel, SIDA

http://blog.obdexpress.co.uk/2018/07/28/car-fans-c800-diagnostic-function-tested/

Remote Maker Review: KD900 and KD900+

Have collected user experience of KD900 and KD900+ remote makers:

KD900 vs KD200:
COMPARE WITH kd200 ,
KD900 CAN CHECK THE frequency of remotes
can copy the rolling code and fixed code remote of garage.
can support smart match for remotes, in other words if come a car
and you do not know wut remotes to choose, just use smart match it will pop out the correct remotes.

KD900+ vs KD900:
KD900+'s has new features:
the possibility to clone most fixed coded garage, home alarm and car alarm remotes.
and it’s pwered by 4*AA batteries with a battery life indicator on the main screen

KD900 review:

1. good:

KD900 is a good tool to have, but don't forget it's able to generate remotes ready for programming, it's not a key programmer, you will need several key programmers as well to offer a good service.

2. great with a key programmer for Ford:

I have the KD900, and it is a great piece of kit. But once you have created the remote, unless you are doing a ford remote, you'll need a diagnostics programmer. I use a Keyscan and an old Advance Diagnostics AD100 which could do with a bit more software on it to be honest.

3. great for Mazda:

quite a few have manual remote procedures , plenty of vag , some honda, some jag etc , but the ones that made the most for me over the years on manual procedure are mazda , great for mazda. theres alot more than ford that have manual processes .

4. PSA 46 chip works:

the nb psa with integrated 46 chip have saved me a fortune and stronger than oem remotes , these you do need diag for chip but manual process on remote .

5. KD900+ works great:

I've kd900+ and also works great, but you need good battery in smartphone - during "online" generating eat power like crazy. If you want buy better look for local dealers than aliexpress - on trade locks they sell it for about 100pounds. If you don't need extra function like frequency meter or garage remotes cloning you can also look for kd mini - i've also got one and it works.

6. Subaru legacy 2008:

Subaru legacy 2008 worked a treat using Suburu 02 and cutting it on hu83!

7. 2001 estate, 2002 hatch and 2003 estate:

Programmed 3 astra remotes in the last 2 weeks. 2001 estate, 2002 hatch and 2003 estate with alarm. All OK
Don't know what kind of remote programmed but the 03 with alarm was online. Probably Delphi

8. Civic 2009-2013:

i use civic 2009-2013 and worked ok

9. sharan with 7m3:

I made today one sharan with 7m3. Only problem was that I have to repeat procedure 2 or 3 times. Where was problem i don't know - maybe in time between clicks or pushing time.

10. 2012 Skoda 5th immo:

I programmed year 2012 with 5 generation skoda.
Also worked the vw ..202ad

11. 7M3:

Today tried to make 7M3, generated like 5 -6 pieces, generate success, but none of them accept by the car :/

12. Mini Cooper:

There are two remotes for Mini Cooper listed in KD Mobile app, 315MHz and 433 MHz.

13. Civic:

I used kd-x2 to clone the civic
I clone it on nb multifunction, that’s why I was thinking that the remote will be cloned as well.

14. Toyota Aygo 2007:

Toyota Aygo 2007 remote works ok with KD900


Tech support from obdexpress.co.uk:
use the manual procedure for the remote with KD900 remote maker:
programmed key in the ignition and switch ignition on
lock door with 2nd key manually
press unlock button once
wait 5 seconds then press unlock button once again
now open door manually , switch ignition off and remove key and test the remote functions.

if programming 2 remotes , when you do second one follow same procedure but press unlock twice each time instead of once

also make sure you are using the correct remote , on that year it may be 1J0 959753N but could also be 1J0 959753 DA or AH , and can also be 1J0 959753 CT or AG

Src:

http://blog.obdexpress.co.uk/2018/07/27/kd900-kd900-remote-maker-review/

How to use M4 Clamp + Condor Mini for cylinder key cutting

Good news! M4 Clamp and Xhorse Condor XC-Mini are able to cut cylinder keys to house locks.

What is a cylinder key?

This is the most popular system for house locks, it is a part of our life, used both at home and at work. It requires the simplest type of key, a single piece milled to present a different profile for each system and each manufacturer. Keyline adapts to the market of cylinder keys, following its development and, accordingly, offering timely blanks for each lock system, including the technological solutions for their duplication.

What’s used for cylinder keys cutting?

Condor XC-Mini key cutting machine with a M4 clamp is able to cut cylinder keys.

Note that you should have the latest Condor Mini software version 24-07-2018 for use of a M4 clamp.

Look here: M4 clamp and Condor machine is working for cylinder keys cutting.

Src:

http://blog.obdexpress.co.uk/2018/07/24/confirmed-m4-clamp-condor-mini-cut-cylinder-keys/