Pathfinder R51 2007 with CONSULT III software, Autel MX808 Maxicheck

Car model and year: Pathfinder R51 2007

Question:
I downloaded and installed consult but cannot get is to connect with my car. I tried 2 different versions V65 & V83 but can't get either to respond.

Answer:
Usually, the consult 3 driver is not installed successfully, please watch the video:

Free Download Nissan Consult 3 Plus V75.20 Software
https://pan.baidu.com/s/1XzIwFDg-BJ0hjhaX9ZsE3w
password: rhf1
Free Download Nissan Consult 3 Plus V65.12 Software
https://mega.nz/#!SNoHnDza!3SyKYvVyKkp218uj2ht40q0lI50ttEE8KlK7m_YayMw

Tested hardware and software:

1. Nissan Consult 3 software: confirmed

Usually you need the interface and a subscription to run CONSULT III software on your laptop, plus a security card (the original one is also compatible with consult 3 clone) to work on the immobilizer system, as needed.
It can do a lot of ECM programming and key programming

2. Autel MX808 Maxicheck

Autel mx808 is another scan tool option for the same cost or less than consult 3 that will allow you to do the same things, but on all vehicles, not just Nissan products.
If you want a good scan tool for the typical DIY'er, check out the Autel line-up. I use the MX808 Maxicheck, which I picked up for $439 a couple of years ago. It allows me to do all system code checks, view live DataStream and has relearn capabilities. If you need any more than that, you can spend a little more and move up to one of the higher Autel diagnostic tools.

Enjoy!

SourceL:
Car model and year: Pathfinder R51 2007

Question:
I downloaded and installed consult but cannot get is to connect with my car. I tried 2 different versions V65 & V83 but can't get either to respond.

Answer:
Usually, the consult 3 driver is not installed successfully, please watch the video:

Free Download Nissan Consult 3 Plus V75.20 Software
https://pan.baidu.com/s/1XzIwFDg-BJ0hjhaX9ZsE3w
password: rhf1
Free Download Nissan Consult 3 Plus V65.12 Software
https://mega.nz/#!SNoHnDza!3SyKYvVyKkp218uj2ht40q0lI50ttEE8KlK7m_YayMw

Tested hardware and software:

1. Nissan Consult 3 software: confirmed

Usually you need the interface and a subscription to run CONSULT III software on your laptop, plus a security card (the original one is also compatible with consult 3 clone) to work on the immobilizer system, as needed.
It can do a lot of ECM programming and key programming

2. Autel MX808 Maxicheck

Autel mx808 is another scan tool option for the same cost or less than consult 3 that will allow you to do the same things, but on all vehicles, not just Nissan products.
If you want a good scan tool for the typical DIY'er, check out the Autel line-up. I use the MX808 Maxicheck, which I picked up for $439 a couple of years ago. It allows me to do all system code checks, view live DataStream and has relearn capabilities. If you need any more than that, you can spend a little more and move up to one of the higher Autel diagnostic tools.

Enjoy