Good news!!!If you wait the
Xhorse Condor Dolphin for a long time and can’t get it, you can choose 2M2 Tank Machine to replace Condor Dolphin.
2M2 Magic Tank is very easy-to-use, Chinese and English menus are optional, with video operation.
Database version: 2019.0612
Milling cutter spindle brushless motor, ball screw drive mechanism, cross roller guide, aluminum-alloy body structure, outer casing engineering plastic, 2 in 1 clamp,Mobile APP Android control interface, easy to operate, fast and accurate, easy to carry out work.With 4 guide pins, 2 milling cutters. Work in the outside can carry with a stable chassis.
2M2 Magic Tank Automatic Car Key Cutting machine Supported Vehicles:
Europe:
For ALFAROME, For AUDI, For BMW, For CITROEN, For FERRARI, For FIAT, For FORD-EU, For HOLDEN, For IVECO, For JAGUAR,
For LANCIA, For LAND ROVER, For LDV, For MAN, For MASERATI, For MERCEDES-BENZ, For MINI, For OPEL, For PEUGEOT,
For PORSCHE, For RENAULT, For ROVER, For SAAB, For SEAT, For SKODA, For VAUXHALL, For VOLKSWAG, For VOLVO
USA:
For BUICK, For CADILLAC, For CHEVROLE, For CHRYSLER, For DODGE, For FORD-USA, For HUMMER, For LINCOLN, For MERCURY
Japan & Korea:
For ACURA, For DAIHATSU, For HONDA, For HYUNDAI, For INFINITI, For KIA, For LEXUS, For MAZDA,
For MITSUBIS, For NISSAN, For SSANGYON, For SUBARU, For SUZUKI, For TOYOTA
Rotate the handwheel to move the middle clamp to the left.
Let the middle clamp completely against the left clamp
Insert the cutter/probe to the top
Let the middle clamp completely against the left clamp
Loosen the fixing screw of the probe.pull the probe down until the clamp platform,then tighten the screw to complete the operation
Pull the probe down until it touch the clamp platform,then tighten the screw.
How to Fix Key on 2M2 Key Cutting Machine Clamp?
162-T Key:
Please set the key embryo in the left side
Let the front end of the key close to the first slot and does not exceed it.
The key remains level on the platform and clamp it
FLAT Key
Please set the key embryo in the right side
Left the front end of the key close to the first slot and does not exceed it
The key remains level on the bottom and clamp it
FLAT Key Shoulder:
Use the stop and insert it to the right slot
Block the key shoulder and clamp it.
HU64 Key:
Use an HU64 clamp,insert the key and then tighten the screws
Set the HU64 clamp to the bottom of the clamp in the right side and clamp it
Attention,the HU64 clamp must be against this side
HU66 Key
Please set the keyembryo in the right side
Block the key shoulder with the edge of the clamp
The key remains level on the bottom and clamp it
LASER Key
Please set the keyembryo in the left side:
Let the front end of the key close to the first slot and does not exceed it
The key remains level on the bottom and clamp it
Laser Key Shoulder:
Use the stop and insert it the left slot
Block the key shoulder and clamp it.
2M2 Magic Tank Automatic Car Key Cutting Machine For sale :