No welding! VVDI MOE001 BENZ EIS/ESL cable + 7G + ISM + dashboard

Mercedes Benz MOE001 full set (BENZ EIS/ESL cable + 7G + ISM + dashboard) is newly available for reading the ECU module data on W204, w166, W221, W212, etc without dismantling.

It is made by Xhorse Company and works together with VVDI MB BGA tool.

Method: Directly plug this cable into the corresponding port of ECU module, then you don’t need to dismantle the module board to weld, this full set can help simplify the job and save time.

Images attached here:

SRC: http://www.obdexpress.co.uk/wholesale/benz-eis-esl-cable-7g-ism-dashboard-connector-moe001.html

Works with VVDI MB : No need dismantle the ECU module, no need to weld.

VVDI MB TOOL latest software version V4.8.0 update

VVDI MB TOOL latest software version V4.8.0 update (2019-01-27)

===== BENZ V4.8.0 =====
1. This update no need update the firmware

2. Support W215, W220, W230 calculate password while all key lost:
a. No more need MCU’s de/soldering, very safe and quickly
b. Support W215, W220 get key password with slow method (All KEY LOST, 2-3hours)
c. Support W230 get key password with slow method (All KEY LOST, 2-3hours)
VVDIMB support all the FBS3 EIS while all key lost:
W166, W197, W212, W218, W246
W172, W204, W207
W216
W164, W251 (-2009)
W164, W251 (2009-)
W169, W209, W211
W202, W208, W210
W215, W220
W230
W203, W463, W639
W639(2009-)
W906
W221

3.Bugfix
download link:
Link 1
https://mega.nz/#!6gB1AA7Z!q7uCyEjetGtuSsOZuMp-P9qIspl07fRPh-tMFhnqJHI

password:123456

Link 2
https://s3-ap-southeast-1.amazonaws.com/public-1251058331/download/product/vvdi-mb/software/VVDI-MBTOOLV4.8.0_password123456.rar

Attach image

Generally, password calculation in 4 steps:

Step 1: Select working key, communicate mode and chassis.

Attention: Connect device OBD line to car.

Step 2: Press “Data acquisition” to start with following steps:

1. Insert working key to ignition, waiting 5 seconds
2. Take out working key, insert again, last insert to IR reader, verify key and car
3. Data acquisition
4. Insert working key to ignition, waiting 30 seconds
5. Insert working key to device IR reader, wait end…
6. Save acquisition data

Step 3: Press “Upload data” to send acquisition data.

Step 4: Press “Query result” to get result.

VVDI MB TOOL V4.7.0 update ( 2019-01-18 )
*** Require firmware V4.5.0
===== BENZ V4.7.0 =====
1. This update no need update the firmware
2. Password calculation for ALL KEY LOST: Support W164/W251(-2009), W221 calculate password when all key lost:
a. Support W164/W251(-2009) get key password with slow method (All KEY LOST, 25minutes-1.5hour)
b. Support W221 get key password with VVDIMB Power Adapter (All KEY LOST, no need re-insert IR, 15minutes)
c. Support W221 get key password with slow method (All KEY LOST, 25minutes-1.5hour)
Until now VVDIMB support all key lost EIS type(FBS3):
W166, W197, W212, W218, W246
W172, W204, W207
W216
W164, W251 (-2009)
W164, W251 (2009-)
W169, W209, W211
W202, W208, W210
W203, W463, W639
W639(2009-)
W906
W221
3. Bugfix

Link 1
https://mega.nz/#!ztICEABZ!PMukbM3eqj-5epnUL-LeXsyf28jMLUVlZqaL1wOlfIo
password:123456

Link 2
https://s3-ap-southeast-1.amazonaws.com/public-1251058331/download/product/vvdi-mb/software/VVDI-MBTOOLV4.7.0_password123456.rar
password:123456

 http://blog.obdexpress.co.uk/2019/01/28/vvdi-mb-v4-8-0-get-old-mercedes-key-password/

OBDOK Multibrands PCF79xx Unlocker

OBDOK Multibrands PCF79xx Unlocker
This device using for renew used smart and keyless keys to factory new state.
OBDOK Multibrands PCF79xx Unlocker is  for renewing original remote and keyless key types.

BMW
BMW CAS 3 Normal
5WK – E – Series
5WK49125 (868MHz)
5WK49127 (315MHz)
5WK49145 (868MHz)
5WK49147 (315MHz)

BMW CAS 4 Continental
5WK – F – Series
5WK49661 (868MHz Continental)
5WK49663 (315MHz Continental)
5WK49662 (434MHz Continental)

BMW CAS4 HUF
HUF – F – Series
HUF5661 (868MHz HUF)
HUF5662 (315MHz HUF)
HUF5663 (434MHz HUF)
HUF5667 (434MHz HUF)

Chrysler
OHT692713AA
2004 – 2007 Chrysler Town & Country
2004 – 2007 Dodge Caravan
2004 – 2007 Dodge Grand Caravan

Chrysler
OHT692427AA
2007 – 2011 Chrysler Sebring
2006 – 2010 Chrysler PT Cruiser
2005 – 2007 Chrysler PT Cruiser Convertible
2008 – 2013 Dodge Avenger
2006 – 2012 Dodge Caliber
2005 – 2007 DodgeCharger
2004 – 2013 Dodge Durango
2005 – 2007 Dodge Magnum
2007 – 2011 Dodge Nitro
2006 -2009 Dodge Ram
2006 – 2009 Jeep Commander
2008 – 2013 Jeep Compass
2005 – 2007 Jeep Grand Cherokee
2008 – 2012 Jeep Liberty
2007 – 2013 Jeep Patriot
2007 – 2013 Jeep Wrangler

Chrysler Kobot 04A
2007 – 2009 Chrysler Aspen
2005 – 2007 Chrysler 300
2005 – 2007 Dodge Durango
2007 – 2011 Dodge Dakota
2007-2009 Dodge Ram
2007 – 2013 Dodge Avenger
2005 – 2007 DodgeCharger
2007 – 2012 Dodge Caliber
2005 – 2007 Jeep Commander
2005 – 2007 Jeep Grand Cherokee

Chrysler Fobik New Normal
IYZ – C01C/ M3NW783X
Chip making: 567 – 738 – 031
2008 – 2011 Chrysler 300
2008 – 2013 Chrysler Town & Country
2010 – 2013 Dodge Caravan
2008 – 2013 Dodge Charger
2008 – 2013 Dodge Challenger
2011 – 2013 Dodge Durango
2008 – 2012 Dodge Grand Caravan
2008 – 2011 Dodge Journey
2008 – Dodge Magnum
2009 – 2013 Dodge Ram
2008 – 2010 Jeep Commander
2011 – 2013 Jeep Grand Cherokee

Chrysler Fobik New Proximity
IYZ – C01C/ Keyless Go
Chip making: 567 – 737 – 061
2008 – 2011 Chrysler 300
2008 – 2013 Chrysler Town & Country
2010 – 2013 Dodge Caravan
2008 – 2013 Dodge Charger
2008 – 2013 Dodge Challenger
2011 – 2013 Dodge Durango
2008 – 2012 Dodge Grand Caravan
2008 – 2011 Dodge Journey
2008 – Dodge Magnum
2009 – 2013 Dodge Ram
2008 – 2010 Jeep Commander
2011 – 2013 Jeep Grand Cherokee

Chrysler Old Fobik: M3M
GQ4 – 53T
CHIP MARKING: 61C0700 (HITAG – 2)

M3M
OPEL
GM13149645 (433MHz VALEO)
OPEL Astra H
OPEL Zafira B(2005-09)
CORSA D NON FLIP

General Motors
GM 13500234 (433MHz 3Btn Opel)
GM 13500235 (433MHz 2Btn Opel)
GM 13500221 (315MHz 5Btn Chevrolet)
GM 13500222 (315MHz 4Btn Chevrolet)
GM 13500218 (433MHz 2Btn Buick)
GM 13500219 (433MHz 3Btn Buick)
GM 13500226 (315MHz 5Btn Buick)
GM 13500227 (315MHz 4Btn Buick)

CRUZE FLIP
GM 13500319 (315MHz 5Btn Chevrolet)
GM 13500318 (315MHz 4Btn Chevrolet)
GM 13500224 (315MHz 5Btn Buick)
GM 13500225 (315MHz 4Btn Buick)

CRUZE PROXIMITY
(Passive Entry) Keys
GM 13500319 (315MHz 5Btn Chevrolet)
GM 13500318 (315MHz 4Btn Chevrolet)
GM 13500224 (315MHz 5Btn Buick)
GM 13500225 (315MHz 4Btn Buick)

CADILLAC
NBG00976BT 315MHz 5BTN KEYLESS GO\PCF 7952E

KIA – HYUNDAI
2 Buttons Key
SVI-CMFCH02 / Keyless Go Key
Chip Marking: 049620C03
3 Buttons
SVI-CMFEU03/ Keyless Go Key
Chip Marking: 049620C03
4 Buttons
SVI-HMFKR04/ Keyless Go Key
SVI-HMFEU04/ Keyless Go Key
SVI-HMFNA04/ Keyless Go Key
Chip Marking: 049620C03
2009 – 2013 Hyundai Genesis
2011 – 2013 Hyundai Elantra
2011 – 2013 Hyundai Sonata
2012 – 2014 Hyundai Veloster
2011 – 2013 Hyundai Equus
2010 – 2012 Kia Forte Koup
2011 – 2013 Kia Soul
2011 – 2013 Kia Sportage
2011 – 2013 Kia Optima
Comfort Access Key
SVI-XMFGE04
Comfort Access Key
SVI-KHFGE04/ SVI-KHFNA433
Comfort Access Key
SVI-DMFGE04 / SVI-DMFNA04

MITSUBISHI
G8D-644M-KEY (434MHz)
Chip Marking: F7952A

PORSCHE
7PP959753BN ( 315MHz – 433MHz – 434MHz)

RENAULT
AK010008 Fluence 3Btn (433MHz)
DACIA
2 Buttons Key

RENAULT, DACIA 805673071R
(Remote Key 2Buttons), 433MHz

RENAULT
SELECT SAME AS: 805673071R
Clio 4 Hands Free

RENAULT 285971998R
Remote Car, Hitag- AES (433MHz)
Chip Marking: F7953MC2200
PCB code: A2C53419439
RENAULT
Clio 4 Non Hands Free

RENAULT 285974100R
Remote Car, Hitag-AES (433MHz)
Chip Marking: F7953MC2200
PCB code: A2C53419439

RENAULT 285970036R
Remote Car, Hitag-2 (433MHz)
Chip Marking: PCF7941
PCB code: A2C53288852

Megan 3 Hands Free
RENAULT 285975779R
Remote Car, Comfort Access Card (433MHz)
Chip Marking: 049621C03
PCB code: A2C53300749

RENAULT 285979045R
Remote Car, Comfort Access Card (433MHz)
Chip Marking: 049622C07
PCB code: A2C53307490

PSA
407 NEW
E25CI009
E33CI002
21676652
407 OLD
E28CI01B
E25CI009
E33CI002
21676652

CITROEN 3 Buttons Key C5
E28CI01B
E25CI009
E33CI002
21676652

RANGE ROVER
5E0U40247 (433MHz)
LAND ROVER
YWX000061 (434MHz, Visteon)
YWX000071 (315MHz, Visteon)

AUDI
8T0959754D (868MHz) (PCB code: 233-453-111-05/06)
8T0959754G (315MHz, Smart) (PCB code: 233-453-111-05/06)
8T0959754 (433MHz) (PCB code: 233-453-111-05/06)
4H0959754K (868MHz, Smart) (PCB code: 233-453-111-05/06)
4H0959754G (315MHz, Smart) (PCB code: 233-453-111-05/06)
4G0959754K (868MHz, Smart) (PCB code: 233-453-111-05/06)

VOLVO
5WK49266 (900MHz, Smart Key)
5WK49269 (433MHz, Smart Key)

NISSAN
4 Buttons Key
A2C53405173 (433MHz, Hitag-3)
A2C53188764 (315MHz, Hitag-3)
5 Buttons Key
A2C53408715 (433MHz, Hitag-3)
A2C53188764 (315MHz, Hitag-3)

NISSAN
A2C53297341 (315MHz, Hitag -2)
A2C32801600 (433MHz, Hitag -AES)

Package List:

1pc xOBDOK Multibrands PCF79xx Unlocker


http://www.obdexpress.co.uk/wholesale/obdok-multibrands-pcf79xx-unlocker.html

2019 Xprog M V5.84 install on win7 : read eeprom possible

2019 Xprog M V5.84 is able to read EEPROM, not like the 2018 version. This post shows how to install 2019 Xprog M V5.84 on win7 and read EEPROM. An important tip for sharing: before open Xprog 5.84, please run the “5.84 registries” several times.

2019 Xprog M V5.84 download link:

1. Free source: https://mega.nz/#!ZARADapS!lUY7sR-HXN-HuvCNqCU1AYXOm-V5F3ujyOhJeOCwQ40

need dongle

2. A reliable source (tested ok and safe)

http://www.obdexpress.co.uk/wholesale/xprog-m-box-ecu-programmer.html

Video demo:

Procedure on 2019 Xprog M V5.84 setup on win7:

Extract”New 5.84 software”.

Open "New 5.84 software", then "5.84 AdbeRdr11000_mui_Std", then "Setup".

Setup the Adobe Reader XI.

Read "See before use" txt.

Copy " 5.84 registry" and paste it on the desktop.

Copy "English 5.84 Software" and paste it into the disk C:

Search "XprogDesktop" and send it on the desktop.

Open "New XPProg" and send "Xpprog-BOX drive" to the desktop.

The files all you need are "Xpprog -box drive", "5.84 registry" and "XprogDesk", the other files can be deleted into the cycle.

At this time, you get message at the right corner of the desktop reading "Device driver software was not successfully installed".

The next is to right click "Computer" then "Manage", then "Device manage", then "XProg" and to "Update driver software".

Browse for driver software on your computer.

Maybe you need to update the driver software again until the xprog 5.84 driver is recognized by the computer.  

Right click on "5.84 registry", select "Merge", then "Yes".

One more time to repeat the same procedure.

Right click on "Xprog Desktop -Shotcut", select "Run as administrator".

Select "Ports COM4".

You see Xprog 5.84 has "Serial EEPROM" option.

For example, read AT93C46 of Atmel.

Now it’s up to you to operate what you need.

Thanks.

http://blog.obdexpress.co.uk/2019/01/21/2019-xprog-m-v5-84-install-on-win7/