Wednesday, 30 August 2017

car spark plug tester detector Ignition Plug Analyzer Free shipping

Dual Hole Car Spark Plug Tester Detector have two testing holes, you can test two spark plugs meanwhile and if you suspect any spark plug works improperly you could compare and test to make accurate judgment.

Production show:





Car Spark Plug Test principle:
 
In automobile ignition system, the high-voltage ignition coil generates a high-voltage (10000 volts or more), and the spark plug diverts it form
high -tension ignition coil into the cylinder engine, spark between the spark plug electrodes will ignite the mixture. The Detector could tell the
good spark plugs from the bad by the strength of the spark.
 
Car Spark Plug Tester Using Note:
 
1. Please Turn Off Power before you place spark plug
2. The Spark Plug Tester is a high-voltage detector, so do not touch spark plug with hand at work to avoid danger.
 
Car Spark Plug Tester User Manual:
 
1.Place the Spark Plug into tester hole 1 or 2; If you want to compare the new spark plug and old one, place new spark plug into hole 1 and the old on into hole 2
2.Connect to power supply
3.Turn the key switch 4 clockwise to turn on tester, indicator 3 will light up, tester is now working at 1000rpm/min.
4. Again turn the key switch 4 clockwise,you can adjust the working frequency between 1000rpm to 5000rpm/min.
   The higher the frequency, the stronger the spark strength.
 
Gasoline Car Spark Plug Tester Product parameters:
 
Main Unit Size:145*85*60mm
Main Unit Weight:220G( Not including Power Adapter)
Power Adapter: Input 100-240V AC /  Output 12V 1A DC
 
12V Gasoline vehicles Spark Plug Tester Package list:
 
1pc x Spark plug tester
1pc x Power Adapter




Saturday, 26 August 2017

R280 BDM programmer work perfect on BMW F series CAS4

R280 BDM programmer is verified to work perfect with BMW F series and BMW CAS4 cars.

Here is the car and ECU list... Tested no issues by uob

Support R280 BMW F series:
BMW 1 series – F20, F21 chassis – pre-2016
BMW X1 series – E84 chassis – pre-2016
BMW 3 series – F30, F31 and F35 chassis – pre-2016
BMW X3 series – F25 chassis – pre-2016
BMW 5 series – F10, F11 and F18 chassis – pre-2016
BMW X5 series – F15 chassis – pre-2016
BMW 6 series – DMEM/F12 F13 chassis – pre-2016
BMW X6 series – F16 chassis – pre-2016
BMW 7 series – F01, F02, F03, F04 chassis – pre-2016
BMW GT series – F07 chassis – pre-2016
Support for BMW EWS4 (2L86D).
Support EZS:
1J35D/2J74Y/4J74Y/0L02M/1L02M/3K85K/3K91D/1L85D/1L59W/3L40K/4L40K, etc.
Support a variety of SRS computers:
9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K79X/5H55W, etc.
Support M35080 series:
quick wipe, read and write 35080/35080-V6/35080-VP/080D0WQ/160D0WQ/35160, etc.
Support FLASH 0K50E online write.

Support for BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.).
R280 CAS4:
R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(1) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(2) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(3) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(4) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(5) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(6) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(7) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(8) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(9) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(10) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(11) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(12) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(13) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(14) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(15) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(16) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(17) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(19) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(20) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(21) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(22) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(23) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(24) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(24) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(25)
Src:

Monday, 21 August 2017

How to OBD read BMW MSV80/MSD80/MSD85 with CGDI Prog

BMW MSV80/MSD80/MSD85 ISN can be read for 5 minutes using CGDI Prog BMW key programmer.

What tool to read BMW MSV80/MSD80/MSD85 ISN:

CGDI Prog BMW key programmer!

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minutes, 100% safe.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5. Support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)
6. Support BMW key unlock

ModelWith a key available to program a new keyWithout any keyto matchRead ISN codeReplace engine computer DMEBMW Key unkockWorking time
CAS1supportsupport  support1 minute
CAS2supportsupportsupport support1 minute
CAS3supportsupportsupport support1 minute
CAS3+supportsupportsupport support1 minute
CAS4supportsupportsupport  30 seconds
CAS4+supportsupportsupport  30 seconds

How to OBD read BMW MSV80/MSD80/MSD85 with CGDI Prog BMW key programmer:

Method 1: can read directly ISN code in the car,please make sure car voltage is 12V above,directly connect OBD to operate–time about 5 minus.
Methods 2: can directly split engine computer (DME) to operate–connect diagram as follows:
cgdi-prog-dme cgdi-prog-pinout
MSV80/D80/D85/wiring in the experimental bench

What else you may need know:

Siemens MSV80Siemens MSV80.1Siemens MSD80Siemens MSD80.2Siemens MSD81Siemens MSD81.2Siemens MSD85.1

7 546 1437 567 6097 546 1417 571 4137 578 0337 507 2277 558 500
7 557 1357 567 6107 550 0147 571 6947 578 0347 507 2287 558 501
7 565 8617 569 9897 565 8597 573 7587 579 0117 578 0887 588 186
7 565 8627 573 3327 565 8607 574 4197 579 0127 578 0897 593 168
7 567 2277 574 5427 567 2297 575 6657 583 3247 579 1427 590 277
7 567 2307 574 5437 567 2327 575 6687 583 3257 579 1447 590 278
7 567 3627 574 5467 567 4917 578 0327 585 5407 581 1627 591 130
7 567 3677 574 5477 567 4927 578 0757 585 5417 581 1637 591 131
7 569 9887 575 5007 567 5427 579 0247 585 7117 583 2287 592 643
7 570 3767 575 5017 567 5437 579 0257 585 7127 583 2297 592 644
7 570 3987 576 6707 568 3707 580 2797 585 8897 585 6547 593 246
7 573 3227 576 6717 568 3717 580 2807 585 8907 585 6567 593 247
7 573 3237 581 1267 568 8427 581 1667 586 9337 589 2317 593 559
7 574 5407 581 1277 568 8437 583 2257 586 9347 589 2327 593 560
7 574 5417 581 5477 569 9787 583 2277 590 8717 593 6667 593 923
7 574 5447 581 5487 569 9797 585 3037 590 8727 593 6677 593 929
7 574 5457 583 5267 571 4687 585 3047 592 0807 595 1797 594 354
7 575 0577 583 5277 571 4697 593 0387 592 0817 595 1807 594 355
7 575 0587 584 3097 572 0637 593 6657 593 4937 599 8817 600 433
7 575 4987 584 3107 572 0647 595 1827 593 4947 599 8827 601 358
7 575 4997 587 1667 572 067 7 596 0197 621 1787 601 359
7 576 2977 587 1677 572 068 7 596 0207 621 1797 601 776
7 576 3007 591 8437 573 796 7 596 022 7 601 778
7 577 0687 591 8447 573 797 7 596 021 7 602 171
7 577 0697 594 4857 573 863 7 600 427 7 602 172
7 577 9967 594 4867 573 864 7 600 428 7 604 356
7 577 9977 597 4257 574 534 7 601 865 7 604 357
7 581 1237 597 4267 574 535 7 601 866 7 604 771
7 581 1247 602 2167 575 875 7 602 118 7 604 772
7 583 4687 602 2177 575 876 7 602 119 7 607 985
7 583 4707 605 4237 576 719 7 604 567 7 607 986
7 587 1647 605 4247 576 720 7 604 568 7 608 712
7 587 1657 609 6587 576 721 7 604 593 7 608 713
7 591 7097 609 6597 576 722 7 604 594 7 612 781
7 591 7107 611 2827 578 020 7 605 662 7 612 782
7 594 4837 611 2837 578 021 7 605 663 7 612 802
7 594 4847 614 3627 578 441 7 608 621 7 612 803
7 594 9417 614 3637 578 442 7 608 622 7 620 385
7 594 9427 624 0527 583 332 7 611 358 7 620 386
7 597 0917 624 0537 583 333 7 611 359 7 620 387
7 597 093 7 586 938 7 612 455 7 620 388
7 602 220 7 586 939 7 612 456 7 621 329
7 602 221 7 586 940 7 614 620 7 621 330
7 605 429 7 586 954 7 616 431 7 624 036
7 605 430 7 588 620 7 616 432 7 624 037
7 609 656 7 588 621 7 618 935  
7 609 657 7 594 305 7 618 936  
7 611 280 7 594 306 7 622 911  
7 611 281 7 595 235 7 622 912  
7 614 359 7 595 236    
7 614 361 7 596 017    
7 624 048 7 596 018    
7 624 049 7 611 396    
  7 611 397   
Src :

Thursday, 17 August 2017

How to setup Renault CAN CLIP software on Macbook Mac OS X

Renault CAN CLIP  works perfect on Macbook Air 2013 / os x 10.9.x / vmware fusion / windows xp sp3 as guest . When you connect interface you have 2 devices (ISO+CAN) that have to be detected inside the virtual machine.


I managed install Clip 146 on MacBook Air with VMWARE FUSION and Windows 7 32 bit.
It works well.


I have a running Windows 7 on a virtual machine over Mac OS X Yosemite with Parallels.
When I connect my CAN Clip, Windows doesn’t recognize the hardware.
Windows can’t detect the unit. But I tested the CAN Clip in a native Windows 7 and It was detect without problems.

[HELP] how to help Windows (Virtual Machine) to detect my sonde ?
Verify the usb connection is enable on the virtual machine on the lower-right side.

[VIDEO] how to run Renault CLIP diagnostic software on Macbook Pro?
[NOTE] Renault CAN CLIP what windows can work on?

Renault CAN CLIP windows 7: YES
Renault CAN CLIP windows XP: YES

Renault CAN CLIP windows 8: need luck
Renault CAN CLIP windows 8.1: need luck
Renault CAN CLIP windows 10: need luck

Which Tool Can Correct Mileage for VW MQB R7F7014xx 5D Cluster?

 Currently, Yanhua Mini ACDP 2 and CGDI CG100X Programmer at OBDexpress.co.uk can support mileage correction for VW MQB R7F7014xx 5D Clu...